Jump to content
SAU Community

Recommended Posts

FOR SALE: Coolingmist Water / Methanol Injection kits

ITEMS CONDITION: Brand New never used.

PRICE: $419.99

The benefits of water injection are:

- Radically cools down the intake air tempratures.

- Eliminates pre detonation *pinging*

- Run more BOOST without worrying about excess heat and pinginging.

- Steam cleans the engines internals.

- Keeps valves cool eliminating the chances of them turning eliptical.

- Raise the octane using methanol or octane booster

- Radically reduces EGT and helps keeps the turbo cool

On average 3.5L of water is used per 60L of fuel.

Water injection beats any intercooler for price, safety and efficiency.

The Turbo kit includes: (Deluxe Single Stage)

-100 PSI water/ methanol pump

-Injector (based on your car)

-Electric adjustable boost activation solenoid

-15 feet of hose

-Brass Check Valve or Electric Solenoid.

-Arm/disarm switch

-LED's

-Fuse

-Relay and looms

-Cable ties etc.

-Instructions

a0_1_b.JPG

The water/ methanol injection is activated by an adjustable electric boost switch. When a certain amount of boost is reached a normally closed electric solenoid is opened allowing the water / methanol to be injected into the intake. The boost switch is adjustable from 1-25psi.

19609161927-thumb.jpg

The pumps are extremly durable. They can run dry, be mounted in any position even upside down and are self priming to 2 vertical meters. The pump is also 100% alcohol safe.

Optional Extras:

- 5L water tank is available for an extra $19.99

- Tank Tapping Kit $19.99

- Clogged nozzle and water flow detector -- lights up an LED to give you a status. It can tell you if your injectors are clogged and it can tell you when water is injecting. This is a fantastic upgrade. Installation is simple. its Tees into the water line and sends pulses to a LED based on the water pressure. Available for an extra $60

-Digital Air intake Temp Gauges. $110

Any car using water/methanol injection experiences gains!

The kits setups are safe and very effective.

12 month warranty on the pump and 90 warranty on any components.

I am happy to answer any questions.

CONTACT DETAILS: e-mail at fross@bigpond.net.au or call 0402430750

LOCATION: Sydney

Link to comment
https://www.sau.com.au/forums/topic/80815-water-methanol-injection-systems/
Share on other sites

Options available:

-Clog nozzle detector ($39.99)

-Inline Brass water filter ($24.99)

-5L Tank and Tapping kit ($39.99)

-Angled injector holder ($19.99)

Thank you

Jordan Ross

fross@bigpond.net.au

0402430750

Closed.

Read the rules please. If you want to sell your parts here as a business you are required to become a regsitered business trader.

Feel free to pm me for further information

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Photo of manifold showing gate location? I mean, it's 6Boost, so we probably shouldn't be worrying, but always wroth knowing what the layout is. Plumbed back to atmosphere? Or into the dump?
    • Yes correct. Also, I'd avoid applying it to soft paint (however I doubt you'll ever have to deal with it in practice). So any paint that hasn't fully hardened, could be a 1k paint that never fully hardened or it could be a 2k paint that was laid down thick and hasn't yet fully hardened. 
    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
×
×
  • Create New...