Jump to content
SAU Community

Recommended Posts

1) lots of money for fuel. Cost me heaps about $350 only got about 400k per tank, and i wound the boost down too.

2) cds the more the better

3) navigator/DJ to read maps and change CD's (you dont really need a map to get there so easy just follow the 1)

4)lots of beer, for the passangers of course.

5)on a seriours note plan for a stop some where say every time you fill up get out walk around/swap drivers other wise you are in danger of killing someone from lack of conitration.

maybe consider getting an exhaust shop to put in a reducer plate on ur exhaust if u r driving for that long, mine is ridiculous after 2 hours to syd, u can hear ur ears trying to counter adjust to the noise, would hate to tihnk what it'd be like after 13 hours

other then that food, water, and a 1000000 cds

would fly up than hire a car, probably cost you less + the number of k's.. geesh..

as for driving, yeah - someone else who can drive as well is a good plan, also stopping every couple of hours 3 or so is good..

and also - good luck - drive safely.. personally i'd fly.. but that's me..

The record without going all out is 8 hours... :D That should keep you nice and busy to stay awake.

But yeah, lots to drink. If you feel sleepy, pull over every 60-30mins. Stop, have a power nap. A 15min sleep will do wonders. Thats it mostly, just do not fall asleep, pull over. It is a long long straight bit of road. Pulling over 3 times more than someone else does not make you any less of a man or anything. It just keeps you alive longer.

Oh, and skittles, starburst, anything with lots of sugar ;)

A 15min sleep will do wonders.  

Oh, and skittles, starburst, anything with lots of sugar :D

Very True.

I did the drive from Toowoomba to central coast NSW in my vl with the gf and it was hard enough only having myself as the licenced driver. I made it 8 hours and needed to sleep, slept for 2 hours and when i woke up i was going extremely good.

you should also try getting some ******Gurarna***** and take them as it keeps you awake for ages, but time it in so that when it dies down you are prepared to go to sleep :cooldance

GL matey

How NOT to do it:

Leave 10pm at night

Boil coolant 2 hours later.

Continue to boil coolant every 100kms.

Almost hit a roo bigger than your car.

Drive all night.

Drink 8 red bull.

Arrive at destination 3pm next afternoon.

5 months later realise the coolant was boiling because of a cracked head.

I had a 2 hour nap just as the sun came up... it did wonders.

Ah the joys of a trip to schoolies in my old ET pulsar!!

The record without going all out is 8 hours... :P That should keep you nice and busy to stay awake.

Fastest i know is 6.5hrs Sydney to Toowoomba but that was a middle aged man in one of Australia's fastest street cars equiped with a radar detector about 8 years ago :warning:

I did the return trip Gold Coast to Sydney at the end of last year by myself. Around 900km so add 70km to Brisbane. I had glandular fever at the time so lots of breaks is a must plus lots of CDs, you go through them quicker than you think!

My parents did an overnight drive to Newcastle a few weeks ago. Hit 1 roo and got 2 speeding fines, so take it easy or it could be a very expensive trip!

just get a shit load of speed.... just kidding

no doze or gurana tabs

ive got a mate who's done it from melb to toowoomba in one go with no sleep... 15 hrs just pump tunes that wake u up like tekkez or sumfin like that not somthing that will put u to sleep

just get a shit load of speed....

Trust me.. doesn't do you much good.. after a hectic night out drove from byron to sydney.. believe me - i was micro sleeping the whole way home - this was a while ago - i don't do any of that anymore..

be driving.. blink................ 200m down the road open eyes.. not good..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...