Jump to content
SAU Community

Recommended Posts

Yet.. your avatar is a photo of a rave... lol

True.. quite observant of you.. if you look at the full photo it's actually taken in 2003 and is in memory of a mate..

Still love the music - just found as I get older have started to grow out of going to raves/parties like transmission and so on and so forth which is where we took the photo..

anyways - moving on.. yeah - if your tire - take a break think we did sydney to byron in about 9 hours.. with stop for lunch and change of drivers.. love the cruise into byron nice long windy roads..

just get a shit load of speed.... just kidding  

no doze or gurana tabs  

ive got a mate who's done it from melb to toowoomba in one go with no sleep... 15 hrs just pump tunes that wake u up like tekkez or sumfin like that not somthing that will put u to sleep

15hours to do that drive? That is fing white lighting.

The problem with flying up there and hiring a car if you are under 25 is the fact you can't hire a car as most places have a policy of 21 or 25 and older. I drove from Brisbane to Newcastle in 9.5 hours with one 30 minute stop at Buladelah for a refuel and food stop.

If you leave early in the morning, i.e 5am, you run the chance of falling asleep at the wheel a few hours into the trip as well.

The problem with flying up there and hiring a car if you are under 25 is the fact you can't hire a car as most places have a policy of 21 or 25 and older. I drove from Brisbane to Newcastle in 9.5 hours with one 30 minute stop at Buladelah for a refuel and food stop.  

If you leave early in the morning, i.e 5am, you run the chance of falling asleep at the wheel a few hours into the trip as well.

That was exactly the problem I had with the g/f. We had an apartment in surfers but wanted a car so the only way was to drive up. I drove all the way there and she drove part way back. We did 12 hours straight to coonabarabran (sp?) with a few fuel stops and then 8 hours to the gold coast the next day.

Plenty of water for you and the car, spare oil and a basic tool kit. Also check your wheel nuts can actually be undone i.e not done up with a pressure gun so when you get a flat you are stranded.

Lots of CD's. We had an esky in the back running off the cigarette lighter as well for cool drinks.

Fantastic country for road trips.

red bull is excellent stuff. once you start losing concentration pull over. every weekend i am awake 52 hours straight and driving 35 hours of that, red bull is unreal as is music you love to sing along too. also if you have a small steering wheel a pair of motorbike gloves makes it easier on the hands and whatever you do, dont turn on the heater! it will make you tired.

and that has what to do with anything.... you shouldnt be 'in' boost on the highway anyways.... you need load to produce boost.... if you are maintaining a constant speed, you will be in vacuum

lots of slight hills from canberra, and as soon as i touch the acc it goes into boost, it would wind its self straight to 12 psi (r33 gtst modded).

As for the hole sleep thing i drove to sydney stayed with family on newyears tryed to sleep but fireworks kept me awake till 4 got up at 5 and drove to surfas, lots of stops.

on the way back left bris vages and drove straight to canberra 12 or 13 hours. middle of the night and almost ran out of fuel, I didnt even know that r33s had fuel lights till it came on.

Mate take the New England Hwy. The Pacific is packed with roadworks and a lot of single lane stuff that is frustrating. Then add all the little towns along the way where you reduce 100-80-60 for 10 mins then back to 100kmh.

The New England Hwy is 110kmh, no stops. It ends a fair way west of Brisbane but the drive is sooooo much easier and far less tiring. I have lived in Tamworth and now in Newcastle, and having to drive the Pacific (last weekend) sucked bigtime. My 2.2c

Mark

Id have to agree with mark the New England is alot better to travel along.

You go through towns such as Stanthope, armidale etc etc.

Im thinking you would go as far as my home town of Toowoomba and then from to Brisbane and or Coast. Takes me about 1.5hours from Toowoomba to Surfers paradise.

Gl matey.

I drove from Coffs Harbour to the Gold Coast today and roadworks are terrible, many 5-10min stops and stacks of 40/50/60km zones. If you took the New England then you could probably take the Cunningham Hwy from Warwick across to Ipswich rather than go all the way to Toowoomba then down, or there's probably a route from the New England to the Gold Coast through Murwilimbah.

Ask your GF to give you a Blow Job every 3 hours while on the wheel. That'll keep u goin :cheers:

Kidding...=)

Check your coolants, tyres and make sure u have a spare tyre with the tools as well. Don't want to get a flat in the middle of nowhere. Please let us know how did your petrol consumption go?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks mate for that reply. Very helpful.    it’s a 2022 400R so would most likely lose those features as you say.     I did a quick compare of a rv37 nav and heading for sale in Japan to q50 model. I’ll pop pics below. Seems  Japan spec head into top, nav unit second below it   below pic Q50 aud delivered     differences seem to be Aus delivered has a different plug top left hand side of head unit- not sure what and where it goes.   and nav unit Japanese tv37 had an extra plug put    Again I’m really not sure what each of these differences mean!       the actual plugs on a v37 and q50 screens look identical on both screens… pics below for comparing. (One screen was is a us delivered one) but should be same gps signals etc as Australia.    If it were as simple as swapping a nav unit from q50 aud delivered im interested -just want to figure out what the missing plug is for before spending big $ on a second hand part for it to not work, and I guess with the head unit, if the band expander does the job (I got a 20mHz so should get the range I’m after) so should narrow my issue down to nav unit only.  I’d love to know what the extra cable on rv37 does and if I elongate that part what it’ll do to the setup,    and also, if I can figure out what that head unit plug difference is, what does that cable do and where does it got can it be altered or re-plugged?! Excuse my ignorance what is ACP/AA, what does that stand for?   Thanks for the info re tyre sensors, helpful and great to know.  I was reading the online manual off Japan website and it seemed to make it sound more confusing than it is  I guess a rim replacement would require the sensors to be moved to a new rim to carry that option over?!     Thanks for the info regarding diagnostic mode. I appreciate your help mate. Trying to brainstorm here to find a solution to get as much gadgets as I can working! I plan to get my local Nissan tech to have a look too who used to be at an Infiniti dealer back in the day to see if any thing they have or idea can find a soliton. But hoping anyone here has gone down the same route to make life easier!!   i guess identifying the cable/plug differences and what they do would be a great way of finding out if the units are transferable    thanks again 
    • No idea about the remote start part. If the V37 nav is anything like other Nissan JDM vehicles, you can't get the factory Japanese nav working in australia, a card from a different car almost certainly won't work, those cards are usually matched to the serial number of the DCU.  You could be possibly swap out the components from a AuDM Q50 to get it working, but if this is a new model (2021+) 400R, then you will lose the newer features like ACP/AA.  That said, if you have ACP/AA, just use google maps.. I assume a band expander would be required to get the local radio stations, but don't forget the Japanese FM band is narrower than ours, so you still might not be able to receive all Australian stations. I can't see any reason the tyre pressure sensors won't work here, there is the sensor unit inside the rim and the receiver nearby in the wheel well.  I have never had to change the batteries on my 2015 Q50, so I assume they last quite a while.  A straight battery change shouldn't need them to be re-registered as they are the same unit, that should only be required if you replace a sensor with a new one.   Word of warning, if you ever go into the 'secret' diagnostics mode on the main screen, DO NOT EVER do a 'reset' in this menu, it will erase all of your model specific data in the DCU and you will need a trip to a dealer to re-program it all, which would be particularly painful being an import.  This applies to the AuDM Q50 too.
    • There is a known issue with the mix door motor on the Q50 which causes these symptoms, not sure if it is common on the Y51 though.
    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
×
×
  • Create New...