Jump to content
SAU Community

Recommended Posts

Has anyone put an aftermarket cruise control system into their manual Skyline? I cover a lot of k's for work in an R34 and cruise would be fantastic.

Just wondering if anyone's done it, or at least heard of kits that work well.

Thanks........ :D

Link to comment
https://www.sau.com.au/forums/topic/80967-cruise-control-in-a-manual-skyline/
Share on other sites

I'd like to know as well. I don't want to hi-jack jmac, but I have cruise control as part of my rb20 related stuff in the cef and if I could put a cruise control accell plate onto my sr20 then that'd be great. I have all the other part of it (the cable and controller). I was thinking if the normal cruise control works by detecting the tension on the accel cable, and simple KEEP it at the same tension then you should be able to use any wrecked nissan one circa models a31, r32, r33, r34 etc.

It might, off course, work vastly differently... anyone know ?

Has anyone put an aftermarket cruise control system into their manual Skyline?  I cover a lot of k's for work in an R34 and cruise would be fantastic.

Just wondering if anyone's done it, or at least heard of kits that work well.

Thanks........ :O

hey, i have an aftermarket kit in my car, it was fitted by the previous owner.

i cant remember the brand name, but i have seen them for around $200

it would have been in there for a few years now, and i have used it many times, it works really well and is smooth when regulating the throttle.

hey, i have an aftermarket kit in my car, it was fitted by the previous owner.

i cant remember the brand name, but i have seen them for around $200

it would have been in there for a few years now, and i have used it many times, it works really well and is smooth when regulating the throttle.

sweet - if you come up with any clues re the brand please let me know!

anyone else? is this just a case of walking in to autobarn and saying "duhhh take my moneys"?

i had cruise in my last car and really didn't use it... even though i drove 45mins each way to and from uni every day for 4 years

my 2c to think about: will you use it enough to justify the possible $300+ price tag?

in city driving, mostly not, but the run i do to work (>1 hr/day) is through lots of boring 70-80-90 km/h zones, fairly light traffic and straight roads notorious for having white vans parked behind bus shelters and blokes hiding behind trees pointing hairdryers at you.

$300 is only 2 decent speeding fines... but your point is duly noted. :P

in city driving, mostly not, but the run i do to work (>1 hr/day) is through lots of boring 70-80-90 km/h zones, fairly light traffic and straight roads notorious for having white vans parked behind bus shelters and blokes hiding behind trees pointing hairdryers at you.

$300 is only 2 decent speeding fines...  but your point is duly noted.  :P

mine was also lots of stright driving. thing is, with so many traffic lights and speed changes that you mentioned, cound the time where you are at a speed and not accelerating or braking from the lights or to dodge cars, or for roundabouts etc etc

the time when you are cruising at speed is minimal

you would end up activating the cruise about 10-15 times in a trip... clearly not worth it i think

also, they allow you to 'relax' more behind the wheel, making your rection times absolutely shithouse

but i'm not going to say anymroe as its your money and if you have your heart set on it then fair enough

in that case, i say check out autobarn or supercheap - they probably have some generic kits that are pretty plug-and-play type of things...

best of luck,

Warren.

sweet - if you come up with any clues re the brand please let me know!

anyone else?  is this just a case of walking in to autobarn and saying "duhhh take my moneys"?

hey ill have a look for u soon and post it up but i can tell u now it is not anything fancy, but works well.

Cruise control kits read your speed signal and dont need to be calibrated. They will see the pulse speed when you "Set" it while driving and will aim to keep the car at that pulse rate by modulating the throttle control in the engine bay using the cable and motor/diaphram thing. It knows that going one way increaces teh speed (pulse) and the other way will decreace it, its so basically simple it can be built from scratch if you knew how to.

With regards to manual or auto, its compatable on both, but you will need to wire up the safty cut-out differently. Normally in Autos it linked to the brake and also the handbrake. When you setp on the pedal or pull the hand brake it switches off and goes back to manual mode. In a manual car, it will be linked to the clutch as well as the brake and handbrake. That way it cuts off if you put your foot on the clutch to change gears.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As an ex-skyline owner Going off how these things are now "modern classics", I would keep the twins and just "refresh" bits that are required for reliable power and have a car you can take out for a cruise whenever you get the itch As a idiot who cannot leave things alone Going deep into the "rabbit hole" is a easy thing to do, as previously mentioned, once you start it becomes a slippery slope, wirh lots of supporting mods, and possibly rebuilds, and unless you have a bottomless pit of funds, the car can spend most of its life sitting in the garage,  broken, waiting for parts, or building more funds For a classic like a R32 GTR Basically, a reliable OEM+ refresh, that isn't a broken garage queen, is alot better than a car that you build, then break, then fix, then break again And it isn't just the engine you need to worry about, these beasties are getting on in age, and all parts are getting, and have got, expensive, the days of picking up cheap replacement engines and other driveline parts are well and truly over The funds not spent on going a single with quality parts, and with all the other other bits required to make it happen, could be spent on refreshing alot of other parts A wise man once said "If you cannot afford 2 GTR's, you cannot afford 1", I also believe he said this about 20 years ago when you could pick up a clean R32 GTR up for around $20k My advice for a R32 GTR (the one and only true Godzilla in my mind) is to think holistically about the whole car, the body, the power train, the suspension, the brakes, and the driveline SAU is a wealth of knowledge with decades of Skyline experience,  from stock, to OEM+, to modified to varying degrees, to full on or weekend or dedicated racecars, as well as full on money pits that rarely leave their garage Treat the old girl nice and give her what she deserves, you are a lucky man to own such a classic car  
    • For that price you could buy the hypergear turbo (big fan as I run one) and the Haltech ECU..
    • +1 for the Elite 2500. Get some new knock sensors while you are at it (pretty cheap), look up the TAARKS Nissan knock sensor kit. You may also want to get new coils (R35gtr) while your at it (assuming your on stock ones), as they are a liability. Mine started right up and idled fine on the base map. Also go MAP over MAF, as said above, Haltech make this super simple right out the box. Another fanboy of DBW here, Outsider Garage from your neck of the woods make some nice conversion gear for the R33 (that’s where I got some of my gear from).
    • Nvm ignore this I read it wrong
×
×
  • Create New...