Jump to content
SAU Community

How reliable is your Skyline?


Recommended Posts

Just a question regarding reliability as I am an ex-Commodore owner and they are probably the most unreliable cars I have ever owned. I moved up to a Skyline after owning several HSV's and V8 Commodores because I loved the style, power and quality of the R33's. So far my Skyline has been very reliable with none of the rattles or squeeks that I had in my Commodores and only basic things needing to be replaced as you would expect from a 10 year old car (fuses, globes, brake pads, clutch etc). How has your Skyline served you so far?

Link to comment
Share on other sites

absolutely awesome!

i've had the car for about 2.5 years now and besides performance modifications and general servicing, the only problem i have had was a timing belt one tooth out (not really a problem, more an incorrect service really)

:)

Link to comment
Share on other sites

had the car for a month then the coilpacks started to die, its a given though since r34s are known for their coilpack failures. other than that the skyline is alot better than my old commodores, however the supra seemed to have a slightly better motor, ran silky smooth, the nissan motors are a little noiser.

Link to comment
Share on other sites

Coils do die but once replaced you can forget them.

They are very reliable unmodified but you can show up slightly weaker area with modification. The same is true for any car.

They don't get the dodgy squeaks and rattles, bad door closing/openings and stuff so much though so that is good.

Link to comment
Share on other sites

Turbo died while having new exhaust fitted. Solution, upgrade to 460hp turbo with ecu and fuel support.

Clutch died with new turbo. Not built to handle 400hp. Got a heavy duty one put on.

Since in both cases I was able to upgrade, theoretically no money was wasted.

Everything else is great. I love my Skyline :)

Link to comment
Share on other sites

I've only had skylines over the last 5 years.. 2x R31, 1xHR31 (only for a few months), R33 GTS-T, and R32 GTS-T

Biggest problem was a crank angle sensor on my first R31.. and fuel pump on my current R32 (fuel pump was installed by me though and was aftermarket)..

Other than that, absolutely nothing. Pretty amazing, and why I've always bought Skylines :)

Link to comment
Share on other sites

Only problem i've had was the stock fuel pump being basically dead, and the car running lean (not dangerously, but defintely on the way to getting there). Replaced that and so far it runs fine. I actually went a skyline over other imports/turbo cars in hope to get great reliablity, as I always drive my cars reasonably hard.

Link to comment
Share on other sites

yeh im currently a ford bogan. yeh laught at me. i know i was an idiot for buyin the dumb thing in the first place. i was wondering how the skyline would be reliability wise with all the high revving n lots of boost etc. but you guys seem to rate them alright. cant wait to get mine. how do they handle flat changes? or dont they?

Link to comment
Share on other sites

yeh im currently a ford bogan. i was wondering how the skyline would be reliability wise with all the high revving n lots of boost etc. QUOTE]

I dont own a skyline either mate but in regards to the (high reving) fest i asked my old man something similar and its not like the typical ford or holden engine... These are a performance engine so take alot more then f and h.

Even with my vl being the RB30 after a while of me really giving her a beating it drastically started to lose power but that wasent so much the engine it was really most things dying around it.

Link to comment
Share on other sites

Mine's been perfect for a yeah in mostly stock form (changed turbo back zorst and cold air box). Had an issue with the fuel gauge reading empty way to early but it fixed itself and hasnt occurred since.

Link to comment
Share on other sites

  • 1 year later...
Mine's been perfect for a yeah in mostly stock form (changed turbo back zorst and cold air box). Had an issue with the fuel gauge reading empty way to early but it fixed itself and hasnt occurred since.

Man I have had my car for six years when they were'nt soo popular and have never had any problems no oil leaks the car is damn strong. :happy:

Link to comment
Share on other sites

1 motor 1 clutch and a couple of engine mount in my car but dare say motor was my own fault after putting the boost on 10 and not being tuned but all in all car cost me 16 owes me 21 after the motor and stuff and looks no better than day one haha but i still love it for the price what goes,handles and stops like 1 not much other than that its been great and pretty reliable other than my little mishap caused by myself

Link to comment
Share on other sites

mine's been very reliable *knock on wood* and besides the normal services, its needed nothing.

one thing i noticed is the rb's are balanced pretty damn well. probably why they can take high revs/hard driving without issues. u can sit a glass of water on the motor while its idling and it hardly moves. try that on a commodore.

Link to comment
Share on other sites

if ur going to push it hard...just make sure you look after your oil (restrictors, increased sump capacity and baffles) and you should be right to go... that's all i am aware of being a consistent issue if you are going to push it really hard (by the sounds of it you plan on thrashing it...excuse me if i am wrong)

...meh

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • That's true. However, this problem has started since the tuning. First time with the return journey from the tuning. But yes, the pipe was clogged with dirt and rust. That was certainly due to age
    • Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
×
×
  • Create New...