Jump to content
SAU Community

Recommended Posts

Just a question regarding reliability as I am an ex-Commodore owner and they are probably the most unreliable cars I have ever owned. I moved up to a Skyline after owning several HSV's and V8 Commodores because I loved the style, power and quality of the R33's. So far my Skyline has been very reliable with none of the rattles or squeeks that I had in my Commodores and only basic things needing to be replaced as you would expect from a 10 year old car (fuses, globes, brake pads, clutch etc). How has your Skyline served you so far?

Link to comment
https://www.sau.com.au/forums/topic/81099-how-reliable-is-your-skyline/
Share on other sites

had the car for a month then the coilpacks started to die, its a given though since r34s are known for their coilpack failures. other than that the skyline is alot better than my old commodores, however the supra seemed to have a slightly better motor, ran silky smooth, the nissan motors are a little noiser.

Coils do die but once replaced you can forget them.

They are very reliable unmodified but you can show up slightly weaker area with modification. The same is true for any car.

They don't get the dodgy squeaks and rattles, bad door closing/openings and stuff so much though so that is good.

Turbo died while having new exhaust fitted. Solution, upgrade to 460hp turbo with ecu and fuel support.

Clutch died with new turbo. Not built to handle 400hp. Got a heavy duty one put on.

Since in both cases I was able to upgrade, theoretically no money was wasted.

Everything else is great. I love my Skyline :)

I've only had skylines over the last 5 years.. 2x R31, 1xHR31 (only for a few months), R33 GTS-T, and R32 GTS-T

Biggest problem was a crank angle sensor on my first R31.. and fuel pump on my current R32 (fuel pump was installed by me though and was aftermarket)..

Other than that, absolutely nothing. Pretty amazing, and why I've always bought Skylines :)

Only problem i've had was the stock fuel pump being basically dead, and the car running lean (not dangerously, but defintely on the way to getting there). Replaced that and so far it runs fine. I actually went a skyline over other imports/turbo cars in hope to get great reliablity, as I always drive my cars reasonably hard.

yeh im currently a ford bogan. yeh laught at me. i know i was an idiot for buyin the dumb thing in the first place. i was wondering how the skyline would be reliability wise with all the high revving n lots of boost etc. but you guys seem to rate them alright. cant wait to get mine. how do they handle flat changes? or dont they?

yeh im currently a ford bogan. i was wondering how the skyline would be reliability wise with all the high revving n lots of boost etc. QUOTE]

I dont own a skyline either mate but in regards to the (high reving) fest i asked my old man something similar and its not like the typical ford or holden engine... These are a performance engine so take alot more then f and h.

Even with my vl being the RB30 after a while of me really giving her a beating it drastically started to lose power but that wasent so much the engine it was really most things dying around it.

Mine's been perfect for a yeah in mostly stock form (changed turbo back zorst and cold air box). Had an issue with the fuel gauge reading empty way to early but it fixed itself and hasnt occurred since.

  • 1 year later...
Mine's been perfect for a yeah in mostly stock form (changed turbo back zorst and cold air box). Had an issue with the fuel gauge reading empty way to early but it fixed itself and hasnt occurred since.

Man I have had my car for six years when they were'nt soo popular and have never had any problems no oil leaks the car is damn strong. :happy:

1 motor 1 clutch and a couple of engine mount in my car but dare say motor was my own fault after putting the boost on 10 and not being tuned but all in all car cost me 16 owes me 21 after the motor and stuff and looks no better than day one haha but i still love it for the price what goes,handles and stops like 1 not much other than that its been great and pretty reliable other than my little mishap caused by myself

mine's been very reliable *knock on wood* and besides the normal services, its needed nothing.

one thing i noticed is the rb's are balanced pretty damn well. probably why they can take high revs/hard driving without issues. u can sit a glass of water on the motor while its idling and it hardly moves. try that on a commodore.

if ur going to push it hard...just make sure you look after your oil (restrictors, increased sump capacity and baffles) and you should be right to go... that's all i am aware of being a consistent issue if you are going to push it really hard (by the sounds of it you plan on thrashing it...excuse me if i am wrong)

...meh

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...