Jump to content
SAU Community

Recommended Posts

any ideas?

Ok so assuming you are running 235/40/17 Dulnop D01Js, and shifting at 7,500rpm

RB20

1st - 3.321 , 60.98km/h

2nd - 1.902 , 106.4km/h

3rd - 1.308 , 154.8km/h

4th - 1.000 , 202.5km/h

5th - 0.759 , 266.8km/h

Final drive - 4.363

RB25

1st - 3.214 , 66.8km/h

2nd - 1.925 , 111.6km/h

3rd - 1.302 , 165.0km/h

4th - 1.000 , 214.9km/h

5th - 0.752 , 285.81km/h

Final drive - 4.11

Obviously if you are running a higher profile tyre, or larger diam wheel then those km/h could be a bti higher, or vice versa for lower profiles or smaller diam tyres.

And even though technically your car may be geared to pull 7,500rpm in top gear and a certain speed, i highly doubt that std engines have enough hp to overcome the drag etc at those speeds to max out the revs in 5th gear

I think I calculted it out based on 3000rpm at 110km/h that 5th gear at 7000rpm should see 256 km/h

im pretty sure if you calculated it out you would get 270ish. i bet when your cars at 2000 rpm your doin 70 and when your at4000 rpms your doin 150. you have an increase of 40kph per 1000 rpm increase

The stock engine does have enough grunt to pull top rpm in factory trim. :D

Looks to me like htere are different gear ratios going around between these cars, which ties in with a converstion I was having this weekend.

4th tops out at 120mph / 7000rpm for me, others I know of get at least another 10mph on top of that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
    • Probably a smart choice to buy one vs build, purely for the motivation part as you said! Imagine the metal dust everywhere from grinding all the steel to build one. Ha ha ha!   Also, post a photo of your garage.   Mine is below, this is where I've been cleaning and have already half filled a caged 6*4 trailer. And this is after my cleaning expedition mentioned previously... The middle normally has a car in it, but I'm dumping things in the middle as I sort through them. And poor skyline was dusty and has had the lightest few drops of rain and now it looks atrocious and needs to be dragged back out and washed thoroughly! And yes to the right is technically another bay, you really can only see 2 bays out of 3 in this picture.  
×
×
  • Create New...