Jump to content
SAU Community

r32 gtr front seat r32 full roll cage

gtr jason
 Share

Recommended Posts

Beer Baron Grand Master

Beer Baron

Posted
Posted

haha, having sat in that seat I'm surprised there aren't a few brown marks on it... Certainly would be some finger shaped marks on the side from people gripping on for dear life :)

Also, the cage in jasons car is one of the top shelf Jap ones from memory it's a cusco/safety 21 cage.

BTW Jason I saw something you may be interested in. Acrylic lightweight windows... very nice full set includes doors, quarters and rear screen is about $2000 for the lot, not bad.

gtr jason Rising Star

gtr jason

Posted
  • Author
Posted

the cage is 6 point with the extra bar over your head at the front and the extra cross bar at the back it all bolts together with weilded brackets. wait till you see the car next Richard 100 kg lighter and a little more power dont want to just beat John again ,this time it will be a flogging for all to see gtr power

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Looney_Head
      R32 GTS-t RB30 sedan

      By Looney_Head · Posted

      Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • GTSBoy
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By GTSBoy · Posted

      Ceramic coating and heat shielding, you mean?
    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      New rear lights, filler panel sprayed, cleaned and back together    before, during, after shots 😍
    • PranK
      My BMW 335i

      By PranK · Posted

      100% is gyprock, I agree. Slip of the keyboard. Haha! I left my indicator bulbs out to save a bit of weight.
×
×
  • Create New...