Jump to content
SAU Community

Recommended Posts

Guest tkch55

my friend's stock R33 gtst with just a catback exhaust is currently experiencing weird idle

cold idles really rough, though stays at a stable 1200, but if you pull off the oil cap or dipstick, then it starts jumping up and down

when the engine is warmed up, idling sounds more normal, still gets unstable if oil cap's taken off, though not as bad as when it's cold

another symptom is if you rev the car in neutral, while the revs go back to idle, you can hear a metallic rattling noise. this happens regardless of whether the engine's warmed up or not

from what i gather, the weird idle with oil cap off sounds like it's loosing compression?

the car was rarely thrashed, it was started two days ago and it was running fine

oil change was done at approx 5500kms ago, atm, the car was recently involved in an accident when a car ran the redlight and hit him from the side, resulting bent drivers side rear quarter and driver's door (this is another story, will post it in NSW section later), tho irrelevent but car's currently not very drivable so we can't get it to a mechanic's place to sus it out in a short time, hence the post

car gets started every 2 days or so, didn't do this in the last few times but it started today

thanks for all your help in advance

cheers

Link to comment
https://www.sau.com.au/forums/topic/82066-weird-idling-problems/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is possibly 55 degrees for the Nismo version. I had a look through the manual and the stocker has a breakaway torque of 2.5 to 3.5kgm. Supposedly the Nismo LSD goes down to 5kgm when worn in but it is pretty grabby even with very little throttle. Worse when cold. So I guess you have three things. 1. Shims. 2 Friction plates 3. Cams Would think shims would be the easiest but Ive no clue how many tenths of a mm shim thickness change equals how many kgm torque. Also not sure if the Nismo friction plates are similar/different to stock or if they are the most of the source of the diff being angry. Think I can write off the Nismo rebuild kit for the standard diff as not being what I want.  
    • Yeah, it was a bit of confusion with me, I rang and asked if they had a boot for a soft top, and then the paint shop when they rang and were asked if it had a hard top on it, which it does, just not a PRHT....LOL Meh, whilst frustrating for all concerned it isn't a war stopper and should be a thing of the past in a week or two In other N/A related news, car is booked in at the end of the month for the cams, springs, retainers, harmonic balancer and retune  I might even pull the lazy arse card and get them to do a full service on it whilst it is there
    • Factory LSD is supposedly a 2 way with a very conservative cam. If you've already tried adding friction modifier to the diff oil and it still locks up too much for your liking you might want to adjust the ramp rate on the cam to be more like OEM instead of reducing initial torque even further. People claim the 8 kgf-m disc kit for the OEM LSD is still very streetable but I've never been able to compare everything side by side on my own.
    • Oh man, at least it sounds they've accepted they stuffed up and not put it back on you...could see some confusion if they asked if it had a hardtop or not, and you've answered truthfully but maybe not answering their real question which is what roof did it have from the factory! Glad your keeping it N/A 2.5
    • Nah, I much prefer colour matched Talking about colour matching stuff, the new/used boot lid turned up, all painted up perfectly......aaaannnndddd, it's for a power retractable hard top, not a soft top.....LOL They are now sending a boot to fit a soft top.....,  whilst frustrating, life is like that sometimes, sometimes you just need to dodge, duck, dip, dive and, ummm, dodge.
×
×
  • Create New...