Stagea Brakes

[joshm35]

R32 gtr brakes fit behind nm35 standard 17inch wheels with a 12-15mm spacer.

[427]

mates, will rotors + calipers from WGCN34 (turbo) fit M35 RWD stagea with no modifying?

[whitenight27]

Ok guys I have to drill and tap my 32GTR front calipers to fit the s1c34 bolts.,I know they are 14mm bolt and have been told it's a 1.25 thread pitch is that correct?

[whitenight27]

Btw I can't remove 1 of mine and get it checked as I need to drive the car around

[scotty nm35]

Why would you tap the calliper? Most guys just stick the 12mm bolts in with a sleeve around them.

[whitenight27]

Course that seams a little doggy lol

[whitenight27]

What size bolts are 33 gtst and 34 gtt? And will 32 gtr rotors work in ether 33 or 34 calipers

Edited December 3, 2013 by whitenight27

[Duncan]

it's not an issue. I've been running m12 bolts (without a sleeve) for over 5 years. bolts clamp things together, they don't locate them

[Duncan]

and yes 32 gtr and 33 gtst calipers and rotors are interchangeable (they are 2mm different width from factory). 34 gtst calipers and rotors must be used together, they are different from all other brake sizes

[whitenight27]

Ok not know what insurance woulsd think about it thow lol. So are 32/33/34 all 12mm bolts? And if I was to run sleeves what specs do I Ned? Besides the 2 mm I know about lol

[whitenight27]

And how long do the 12mm bolts need to be? My calipers did not come with any. Is a s1 c34 if that changes anything

[GoldZilla]

12mm bolts with the sleeves works fine - I've just had mine done in the past month (beginning of November) and had no issues so far. Went from standard s1 C34 brakes to R32 GT-R.

I got the sleeves from Daleo (thanks again, mate!), and all is well - no movement, no clunking noises, etc.

[whitenight27]

Ok do u know the specs of the sleeves? I will get some made local out of stainless. And what size are standard 32gtr bolts

[scotty nm35]

18-20mm long, 14mm OD, 12mm ID.

Just get the 12mm bolts from a bolt joint. Can't remember how long they were, or what pitch. Sorry.

[whitenight27]

Ok cool. Thanks. Yer I can find out the pitch by taking in my caliper and get it matched

[Blek]

Scotty fabricated the sleeves and shipped them to me for a very reasonable price in a very reasonable time frame when I was upgrading my brakes.

Worked perfectly

[whitenight27]

Yer I am in WA and Australia post is shit lol and being this close to Xmas might not get them in time

[TM35]

Ok so my 2nd hand R34 GTT front brake callipers bolt on to the new RDA 310mm Rotors purchased for the NM35 but I now require new custom brake lines to allow them to work.

Certainly Didn't give a thought to that happening

But I have never carried out a changeover quite like it...

Thats modifying tho...

So what I found was $40 a side for rubber or $90 ADR approved braided

That didn't require a second thought...

Thanks Kurt from power brakes in Adelaide extremely handy guy see you tomorrow.

[TM35]

Ok so my 2nd hand R34 GTT front brake callipers bolt on to the new RDA 310mm Rotors purchased for the NM35 but I now require new custom brake lines to allow them to work.

Certainly Didn't give a thought to that happening

But I have never carried out a changeover quite like it...

Thats modifying tho...

So what I found was $40 a side for rubber or $90 ADR approved braided

That didn't require a second thought...

Thanks Kurt from power brakes in Adelaide extremely handy guy see you tomorrow.

[FIA510]

I just ran the factory R34 line , that i got with my calipers. Awesome upgrade for the $$