Jump to content
SAU Community

Pulse Performance (newcastle) broken into


ER3498GTT
 Share

Recommended Posts

On Tuesday night at some stage Pulse Performance in Newcastle was broken into. Unfortunately for me, my R34 was in their workshop .....I was informed today that my 2 x HKS 2530's, Stainless manifolds and X-force stainless dumps were some of the items stolen.

If anyone should come across someone selling a cheap set of any of the above pls beware...and if they haveany any info please pm me or contact the local Police. Thanks to these bastards my RB26 conversion has taken a nice step backward.

Link to comment
Share on other sites

Damn thats not good to hear :cheers::(

If i run into anything locally thats similar to those stolen parts ill let you know. Hope you can catch them and lock the stooges away man... :chairshot

Link to comment
Share on other sites

do those sort of things come under the workshops insurance?

Or are you just out of pocket now?

Very sad and gutless thing for someone to do.

Don't forget to keep a look out on ebay and some other auction sites as well.

Good luck with it all.

Link to comment
Share on other sites

Surely this is covered by insurance. It would be outrageous for Pulse to leave you high and dry!?

Sad new Don, hope it is all resolved painlessly. If they (Pulse) stuff around, perhaps consider legal action. Otherwise it is like having money deducted from your bank account because the ANZ branch was robbed...

Link to comment
Share on other sites

The worst thing is...this stuff took ages to save for and collect the right parts at right time....the whole thing sucks!

It smacks hard of an inside job fellas....alot of things dont add up? But hey if u hear anything let me know...i mean...not many in newy with RB26's and those parts will stand out...thats if they even if they still in the newy area...

attached is a couple of pics...of what was once there....*fingers crossed they attach*

Link to comment
Share on other sites

Didn't work Don. Wasn't Luke away in QLD last week? As well, I heard that they had closed down again and were only taking on large jobs, one at a time?

Link to comment
Share on other sites

You sy they you handed the parts and the car to them all together, Here is a tale you can relate to then.

About 3 years ago my brother near new WRX was in a workshop in sydney. It already had apexi front mount, apexi turbo, power fc, coilovers the list goes on. He then went and bought a new trust t67 kit, injectors, twin plate clutch, trust intercooler, about another 14k. All this new gear was sitting in the boot, he handed his car to the workshop and surprise surprise it went missing that night. He found out over 36 hours later and not even from the shop it was the police who called him.

My brothers insurance checked the premises themselves and paid for the car but not the parts - fair enough. We later found out that the keys to my brothers car were not locked up as the shop could not provide the keys.

Cut a long story short it went to court, the shop owner never fronted so they ruled in my brothers favour but no one knows were this guy is so no recourse can be taken.

Lesson to learn people - if your doing a buil up only give the shop the parts as required!

Hope you have better luck being reimbursed by Pulse performance as they have a duty of care to their client (you) when they accept your vehicle as a job / car to work on. They make their money buy working on cars therefore it is up to them to make sure these cars / parts are safe whilst in their care.

Link to comment
Share on other sites

That sucks hard...

No wonder that SAU'ers try and do as much work as possible themselves..... I dont like leaving my car overnight in a workshop - but as previously mentioned, it should come under the workshops insurance.

Well If the thieves knew what they were after - surely they would have also taken diagnostic equipment, tools. It does sound like a inside job.

Cheers

Sumo

Link to comment
Share on other sites

Well, i tell you what is poor about this situation.

Apparently this happened on tuesday....i hear through a mate about it on friday? So i call them up and they say yeah they had an incident but nothing major just a smashed window...

then on saturday i get a call and am told that my parts are gone....how shitty is that??

So much harder for me to hit the ground running 4-5days later....

Link to comment
Share on other sites

You sy they you handed the parts and the car to them all together, Here is a tale you can relate to then.

About 3 years ago my brother near new WRX was in a workshop in sydney. It already had apexi front mount, apexi turbo, power fc, coilovers the list goes on. He then went and bought a new trust t67 kit, injectors, twin plate clutch, trust intercooler, about another 14k. All this new gear was sitting in the boot, he handed his car to the workshop and surprise surprise it went missing that night. He found out over 36 hours later and not even from the shop it was the police who called him.  

My brothers insurance checked the premises themselves and paid for the car but not the parts - fair enough. We later found out that the keys to my brothers car were not locked up as the shop could not provide the keys.

Cut a long story short it went to court, the shop owner never fronted so they ruled in my brothers favour but no one knows were this guy is so no recourse can be taken.

Lesson to learn people - if your doing a buil up only give the shop the parts as required!

Hope you have better luck being reimbursed by Pulse performance as they have a duty of care to their client (you) when they accept your vehicle as a job / car to work on. They make their money buy working on cars therefore it is up to them to make sure these cars / parts are safe whilst in their care.

I remember that Rohin, what a shitter that was :D

Link to comment
Share on other sites

Most certainly the workshop is required to have insurance and their insurance should pay you for all your stuff stolen. still a shame, but if the workshop does the right thing you will get all of your money back.

Link to comment
Share on other sites

that sux big time. Sounds like a continuation from the ToyShop breakin last month. They also stole bits for a rb26 - cams etc i think

I know all the shops I have been to have something like "all items left on premises are at own risk"

Link to comment
Share on other sites

Someone is gonna have a beefed up (hot) rb26 runnin along the foreshore soon.

Sounds like it may be the same mob goin around as eXc says. Hopefulyl the police or someone can put an end to this crime soon.

Link to comment
Share on other sites

I know all the shops I have been to have something like "all items left on premises are at own risk"

Fortunately for consumers those type of disclaimers are (generally) worthless. Unless Don signed an agreement or contract when he dropped of his car and parts there shouldn't be any problems.

For example, just because a workshop has a sign stating "Vehicles not collected within 7 days of completion of work become property of ABC Pty Ltd" doesn't mean the company can legally do it.

I had a look through the Trade Practices Act and the NSW Fair Trading Act but neither of them cover security of goods owned by a third party.

Chris mate I hope I don't sound rude, just wanted to let guys breathe a little easier.

Once again I encourage anyone involved in this sort of situation to seek legal assistance. It may cost a few hundred dollars just for a guy to write a letter of demand to a workshop, but it could save a lot of hassle, it lets the workshop know you are serious and you will increase the likelihood of being reimbursed a hundredfold.

Link to comment
Share on other sites

Why would anyone go to the trouble of lifting out a 1.5m x 4m pane of glass from the Toyshop Imports shop front, lean it gently against the wall without breaking it, then proceed to steal 4 BOV's and some empty boxes?

Newcastle doesn't have the smartest criminals. The person who broke into the Toyshop the second time was caught and charged because his car was seen in the area 10 minutes before the break - in. He also took a stolen BOV to a local performance workshop and asked for it to be fitted!

Some people will go to extraordinary lengths to get what they want unlawfully, but in Don's case, I would suggest that someone has scoped out the workshop before the break - in and it wasn't just willy nilly.

Link to comment
Share on other sites

  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Just ordered those bosses, hopefully that does the trick thank you very much everyone for your replies it's really appreciated  
    • to have this type of adjustment possible with a curve as I wish, what budget (engine) should be planned?  
    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
×
×
  • Create New...