Jump to content
SAU Community

seriously loud ride!


Recommended Posts

hey all,

my new r32 gtr has tein coilovers, not sure what model, but there is the most frustratingly loud banging noise from the rear over every bump!

i have never had coilovers before and these came with the car so i dont know what to expect, the car is not excessively lowered, guards are about 2inches off the rubber (i imagine its set to stock ride height).

there appear to be no other suspension mods.

but this deep banging/bumping noise is worrying me, i have only had the car 1 day and the clutch has died so i havent had a chance to try and diagnose the problem.

any suggestions/thoughts would be great

cheers

dan

btw im 99% sure its the teins everything in boot (spacesaver and tools etc) is secured pretty well

Link to comment
Share on other sites

before you go to all that expense does it sound like a "loose" bang or a tight one? I pulled the back seats out and stuff to find something floating around loose beneath the parcel shelf. might be worth a look if it's a "loose" bang

Link to comment
Share on other sites

no its a tight bang, its a metallic sound, but not tinny, very solid. and can be pinpointed side from side if i go over a bump or ditch with only the one side then the noise comes from that side(obviously)...

if fate decides a rebuild, would it be cheaper to just get bilsteins?

and any suggestions where to get tein's rebuilt in sydney (or australia!)

thanks

dan

Link to comment
Share on other sites

no its a tight bang, its a metallic sound, but not tinny, very solid. and can be pinpointed side from side if i go over a bump or ditch with only the one side then the noise comes from that side(obviously)...

if fate decides a rebuild, would it be cheaper to just get bilsteins?

and any suggestions where to get tein's rebuilt in sydney (or australia!)

thanks

dan

www.bilstein.com.au is the best place to get it done.

It's not cheaper to get a whole new suspension set up.

Bilsteins cost $250 per corner (x4 = $1000) and then its around $400 to put them in.

Link to comment
Share on other sites

im guessing that means yeh theyre fooked? and im fooked because its not cheap to rebuild?

Well if you have no money to fix it up then yes, you're stuffed. :headspin:

You could go for a cheaper set of replacement shocks. I think Aussie made ones like Pedders will be cheaper.

Link to comment
Share on other sites

Do you have any pics of your car?, MAYBE (i'm just guessing) that its the wheels you have MIGHT have the wrong offset and are sitting outside the guard so when you go over a bump, the wheels actually hit the wheel arch (makes a similar sound), i guess it doesn't hurt to look at every possibility (when i had the wrong offset wheels on my car, the wheel were actually sitting out of the guard a bit) so when i travel on VERY bumpy road it use to hit and make a very annoying sound.

Link to comment
Share on other sites

yeh thats the thing, it came with these teins from the dealer...

its ok, its in the shop now,

its gonna get worked!

new rotors, pads, caliper rebuild, braided lines, fluid etc, all round.

new daikin HD clutch and all bits and pieces that go with it.

new bilsteins etc (not 100% sure what will need to be done here yet)

full check over and service.

all in all its gonna be an expensive exercise, but most definately worth it.

hopefully i'll just forward the bill onto the dealership...

(doubt that will work though)

dan

Link to comment
Share on other sites

The dealer has a responsibility to sell you a car in working order. If the clutch failed as soon as you bought it, it is their problem to have it fixed and they are legally bound to do so as long as the car was not sold on the agreement of a rooted clutch. You should have gone to them first thing rather than paying yourself to have it fixed. I doubt forwarding the bill onto them will make them pay it.

My 2 cents....

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
    • @99RS4just wondering if you ever took photos of the footwell lighting / how you bypassed the controller, im keen to haver footwell lighting come on when I open the doors too   
×
×
  • Create New...