Jump to content
SAU Community

Recommended Posts

EDIT 3/8/05: Problem fixed for now - see post 12 below.

Been having a bad run with the line,

Had a minor bingle about 2 weeks ago, car was running fine after (only front bumper was rooted) so the car was sitting in my garage and not started for 1 1/2 weeks. Go to start it yesterday and battery was dead, no prob, it was on the way out for a while and I already had a new one. So I replace the battery and go to start it and when I hold the key in the start position I get this loud Click, Click, Click, Click, Click, Click, noise at about 5 Hz, comming from the somewhere up front. The motor does not turn over at all.

When I hold start the voltage drops considerably - I know the battery is good, besides I also tried to start the car with the car jumpered to another running car.

All this sounds like a rooted starter motor to me, but before I spend craploads on a mechanic trying to find out what is wrong - has anyone had a similar problem? Does anyone know what it couls be?

Any help greatly appreciated.

i had the same problem iwth mine when i imported the r32. i thought it was the alternator but when i took it to the auto electrican he found out the it was some weird fuse ive never heard of before or something. if i were you i would take it to the auto electrician. get him to ring you once he knows what the problem is then you can decide from there. im a cheap arse and if it was the alternator i would have bought a second hand one instead of paying a shitload for a new one

It seems to be a problem in the starter circuitry. When I had that problem, my mech re-wired the starter solenoid so it got power direct from the battery (used the factory trigger wire to switch a relay). Haven't had a problem since.

Thanks for the replies, few things for me to try.

I forgot to mention that it used to do it when my battery was low, so BBQ's reply is sounding like its on the right track.

I have had the same issue, but mine did it also when there was plenty of voltage (seen from PFC). I always figured the starter motor was not engauged right. All I do to fix the issue is move the car a little while in gear the the problem goes away.

I dont know if I am right with my theory but it works for me...

I thought of doing that but then I thought that the startor mortor is not engaged unless it is being cranked. I'll give it a go if it worked for you.

I have had the same issue, but mine did it also when there was plenty of voltage (seen from PFC). I always figured the starter motor was not engauged right. All I do to fix the issue is move the car a little while in gear the the problem goes away.

I dont know if I am right with my theory but it works for me...

I have had the same issue, but mine did it also when there was plenty of voltage (seen from PFC). I always figured the starter motor was not engauged right. All I do to fix the issue is move the car a little while in gear the the problem goes away.

I dont know if I am right with my theory but it works for me...

Mine does the exact same thing.. a couple of times a week I have to give it a bit of a clutch start..

That clicking noise is the noise that it will make when the battery cannot supply enough CCA to the starter motor (Cold Cranking Amps). It makes this when enough voltage is present to turn the vehicles circuitry on but not enough to crank the motor. Check your battery voltage and then if that doesnt work get your wiring to your starter motor checked. If the starter motor was rooted I doubt it would even make a clicking noise.

I seem to have fixed the problem, I just played around with the power connections to the starter motor and gave them a quick cleen - have not had a problem since (3 days later).

Thanks all for your help, if this fourm did not exist I may have payed $200 for someone in a workshop to do the same thing.

Cheers,

Pat.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The spray cans were in the "Kiln" room whilst I was preping the parts,  so probably around 2 hours to get them warmed up, the kiln room has 3 small ovens running at 100°c, 3 medium sized ovens running 100°c, and the large one I used running at 80°c, the room itself was about 28°c, I also spent a bit of time taping up the parts in the room as well, and by the time I was done I would assume that the parts were around that 28°c As for power, I expect a couple of Killerwasps up high would be achievable with the current mods, I'm still running the MZR 2.0 intake and throttle body, and there is a slight mismatch with the 2.0 intake (smaller) and 2.5 intake ports (larger) on the head, this intake is matched and specifically designed to fix this issue with the ports mismatch, the throttle body is also a couple of mm larger, OEM is 65mm, the Bosch is 68mm In the end it will look "prettier" than the molded plastic thing that is the OEM MZR 2.0 intake As for the LSD, it's the OEM Torsen which works fine for what I use the car for, plus, basically no maintenance apart from the occasional oil change
    • I was at Tunehouse in Marrickville (great team over there really know their VR's) , and I spotted this Very clean R35.  
    • Mate , I have the same issue right now with the exhaust noise , if you can tell me what your local guy did , I'll talk to my guys and see if they can do the same. Power is good but it just too loud when put it down. 
    • The other trick I've found with wrinkle black is to put the can in hot water for a bit to warm the paint up, and to pre-heat whatever you're painting. It'll be interesting to see if you pick up any power with the intake, following with interest. Got a proper lsd for this?
    • Plazmaman 76mm Pro Series, done. Data to back it up, I posted up somewhere here a few years back
×
×
  • Create New...