Jump to content
SAU Community

New Injector,AAC and Temp sensor Connectors

Tektrader69

By Tektrader69,
in Group Buys

 Share

Recommended Posts

Tektrader69 Rising Star

Tektrader69

Posted
Posted

I dont know if there is any interest over here, But I just did a group buy in the 300ZX forum for new injector, AAC and temp sensor connectors.

I recently replaced all mine and it made a huge difference on a 15 year old car.

My connectors where all old and green.

I can get a few more of these if there is any interest over here.

$7.80 each and 5 dollars postage.

Cheaper than a new loom and big payoff IMHO.

Here are a few pics with Z32 parts.

You get new boots, plug, and two pins in each kit.

DCP03373.jpg

top and side feed injectors use the same plugs

DCP03374.jpg

temp sensor

DCP03375.jpg

This will be the only mod on Nissan connectors, some have this bump on them others dont.

The idea is to file or slice off that raised plastic block on the side. I have only see this on some temp sensors and AAC valves, Not on injectors.

dcp03379.jpg

Let me know if there is any interest over here via PM.

I can get some more connectors if there is a need. Lets set the closing date on this group buy at the 16th of August.

I will post throughout that time if you need them.

Thanks

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      The trouble with phone apps is that they really do not know the sensitivity of the mic on each specific phone, whether there is some sort of cover or skin that can change that, etc etc. So the readings off them are not calibrated. You certainly couldn't be sure that you were even within 3 dB. I have the same app on two (actually more than that) different phones/tablets and the readings in the same room at the same time are never the same. I don't mind the apps - they are as useful as a dyno - if you're testing for delta from thing1 to thing2. But not to try to generate some sort of absolute value.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm gonna use the "Sound Meter" app from the Google Play Store and as close as I can bother to these procedures: 4. TEST METHOD FOR ALL VEHICLES EXCEPT PRE ADR83 IN-SERVICE GOODS VEHICLES AND OMNIBUSES 4.1 Microphone position 4.1.1 The microphone shall be directed towards the orifice of the exhaust outlet and shall be supported by a tripod or similar device not providing excessive acoustic reflection. The general requirements for positioning microphones are shown in the Appendix. 4.1.2 The nominal axis of maximum sensitivity of the microphone shall be substantially parallel to the test site surface and shall make an angle of 45 degrees ±10 degrees with the principal direction of gas flow from the exhaust. 4.1.3 In selecting the 45 degree alignment from the outlet of a motor vehicle fitted with two or more outlets, only the angle resulting in the microphone being farthest from any other outlet must be used. National Stationary Exhaust Noise Test Procedures for In-Service Motor Vehicles Page 3 4.1.4 The height of the microphone above the test site surface shall be equal to that of the orifice of the exhaust outlet ±25mm but shall not be less than 200mm above the test site surface. 4.1.5 The distance of the microphone from the exhaust outlet orifice shall be 500mm±25mm. 4.1.6 [Relates to vertical exhaust outlets] 4.1.7 For vehicles fitted with one exhaust outlet the microphone shall be placed so that the greatest possible distance is achieved between it and the vehicle. 4.1.8 [Relates to multi exhaust outlets] 4.1.9 [Relates to multi exhaust outlets] TLDR: 200mm off ground 45 degree angle relative to exhaust flow 500mm from tailpipe exit. (I probably won't use a tripod) Here's a photo, cause I read the instructions wrong myself.
    • GTSBoy
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By GTSBoy · Posted

      No ABS, no TCS, no airbags, no cruise control, no lane departure assist, no emergency brake assist, no orange lights in the mirrors (continuously annoying me in multi-lane traffic), no stupid rear view camera. I am the one responsible for where my car goes and how it does it.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Cheapest Jaycar one is only $65.
    • Dose Pipe Sutututu
      Mistakes were made, my R34 Story

      By Dose Pipe Sutututu · Posted

      Probably best way would be using a proper dB / SPL meter lol Buy one and ship it from state to state to have a consistent test device lololol  
×
×
  • Create New...