Jump to content
SAU Community

Recommended Posts

Could I get a price on a

HKS speed cut defender

Nismo 300km dash

and

Front indicators for a veilside bar I have heard that Nismo do them, they cant be anymore then 80mm in diameter. But I have seen them like 30mm or 40mm see what you can find please.

cheers

SirSkyline

Do you deal with trust/greddy parts ?

Would you be able to source the plumback adapters for the Trust Type RS bov ?

Ive been waiting for one for almost 2 months now......cant find anyone that stocks it.

PM send mate. yes i deal with greddy parts.

Can you get a HKS speed cut defender or a similar item from a different manufacturer? It's to remove the 180km/h speed limit on my WRX.

yes, i can

http://www.trust-power.com/02greddy/speed_limitcut.html

thanks :mellow:

if keen, just PM me. keen the thread clean

more info on rear toe control rod to suit r32 gtst please

info added. please check the beginning of thread for more info! :mellow:

Price For:

Nismo 1.5way LSD for r33 gts-t s1

Cusco 2way LSD for ae86

Cheers Michael

Nismo 1.5way LSD for r33 gts-t s1

TYPE RS - 1465 DELIVERED

TYPE MZ - 1295 DELIVERED

* for different check my 2 and 3 thread. i put some info abt them :mellow:

Cusco 2way LSD for ae86

TYPE RS - 1240 DELIVERED

TYPE MZ - 1095 DELIVERED

* for different check my 2 and 3 thread. i put some info abt them :blink:

Could I get a  price on a

HKS speed cut defender

Nismo 300km dash

and

Front indicators for a veilside bar I have heard that Nismo do them, they cant be anymore then 80mm in diameter. But I have seen them like 30mm or 40mm see what you can find please.

cheers

SirSkyline

WILL CHECK ON IT MATE :mellow:

Is this for suspension only or can you get turbo's ?

I noticed you had HKS listed...

yes i can get and i can ask japan how much are they?

if you have part no. that will be even better.

thanks :P

yes i can get and i can ask japan how much are they?

if you have part no. that will be even better.

thanks :P

HKS GT2530.

I was told that they have been discontinued which i don't understand cos they are such a great turbo !!

good for gts-t's and gtr's....

and are the HKS one's worth the extra money over a garret ? i heard that garret mass produce where HKS make each one individually or something...

anyone care to clear it up for me ?

THE THREAD HAS NOW BEEN CLOSED AND MOVED TO A NEW ONE JUST CUSCO PREORDER ONLY

THIS IS DUE TO UNFORSEEN CIRCUMSTANCES FOR OTHER BRANDS WHICH IM NOT ABLE TO GET THE QUOTE FAST ENOUGH AND THAT THE PREORDER IS CLOSING SOON.

STILL IF YOU NEED QUOTE FOR ANY OTHER PARTS, PLEASE PM OR EMAIL ME AT [email protected] BUT I WONT BE MAKING ANY LIST AS EXTENSIVE AS THE CUSCO ONE.

NEW CUSCO PREORDER - CLICK BELOW

http://www.skylinesaustralia.com/forums/in...st=0&p=1516461&



  • Similar Content

  • Latest Posts

    • Nah it factory manual not sure about ratio but it looks like there’s been some work at the rear 
    • so I need a new speedo cable 
    • Throwing my spoon to the soup here a bit.  When I installed a 044 back in 2012, along with the direct power mod, the car became very difficult to start. To a point I burned one starter motor as I was late for work and tried to get the thing going. With some tuning and careful use of gas pedal when cranking it became bearable. Trying to make this short as possible, but the 044 died after 2-3 years, after which I went with an AEM 320lph pump, which also died after about 4 years to my dismay. After that I went with a Nismo pump, and while trying diagnose an emissions problem, I noticed for the first time that my fuel pressure was 5bar/72psi on idle, and that removing the vacuum line did nothing. After monitoring the situation, and removing the direct power feed and going back to FPCM in attempts to remedy it, I noticed there was fuel in the pressure regulator vac line. Kept the FPCM, installed AEM external regu and the car became sooo much better in every way, including starting. And I had driven it like it was for 11 years.. Anyway, I agree these are likely two different problems, and the FP problem you just haven't noticed before. I do not know much about haltecs, but what first came to mind was the CAS, which probably is not there any more. So how is the wiring from haltec to gauge cluster? How is the battery voltage and alternator?
    • Your car was auto before? You have different diff ratio (auto vs manual i think? or n/a and turbo?)
    • +1 for getting a screen off alibaba, CarPlay/Android Auto is vastly better than whatever navigation cars had 10 years ago. I got an Android screen for my 2015 BMW, huge difference. Fully compatible with factory stuff including iDrive controls.
×
×
  • Create New...