Jump to content
SAU Community

Recommended Posts

i am trying to get a few people together to have a lil r/c meet at monash uni.

so far i have a few people from rcdrift.org, nissansilvia.com and eurocca.net aswell

car park is approx 130x60m with only 3 poles in the way.

i hope this turns out to be a good social event where we can relax, drive and have a good time.

meet time is approx 2pm and will run till whenever.!!!

anyone interested???

Link to comment
https://www.sau.com.au/forums/topic/82779-rc-drift-meet-at-monash-uni-clayton/
Share on other sites

Dude are you for real?

Whats the deal with the cops and allowing 50 people to use a uni car park for drifting? neighbours complaining and shit?

Damn Hooligans.

ofcourse his 4real, these things go on all the time, dont be suprised

should be legal rite? its remote controlled car drifting if im not mistaken??

can i invite my lil bro? he's a pretty good drifing maggot who goes on n on n on abt how good he is... i told him to get a rwd car n then talk hahaha

btw, the car park i assume where this event is taking place is the engineering carpark? how abt a decent description of the place :unsure:

pleasae take note that 20vturbo stated "r/c" meet and taking that r/c means recmote controlled this is for 1/18th scale cars! NOT NORMAL ROAD GOING CARS!! and the university does not endorse drifting or any other such degenerate actions on its premesis (just dont let em know... B))

I used to race Radio Controlled Cars at the track over at Templestowe Reserve. Before it got all re-done.

I raced a Tamiya 4WD, Celica it was. Had it ball raced, electronic speed control and used to only ever loos to a guy who had one extra ball bearing in the car, the big one near the motor.

Loved it!

Sold the car and all the bits to buy an exhaust for my first Commodore. VN V6 5 speed!

So that's where it all started!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...