Jump to content
SAU Community

Atp

Ait

By Ait,
in Victoria

 Share

Recommended Posts

NismoR34 Grand Master

NismoR34

Posted
Posted

They are round the corner from my place too.

I haven't been there [yet] but they have been modifying an r33 gtst for a while now so I think they would be pretty familiar with skylines...i think its their own car too [its white with custom plates like ATP-R33 or similar].

They have also done work on gsr / evo's and plenty of others too like VL's etc...I will probably head down there when I decide to do some mods...

Link to comment
https://www.sau.com.au/forums/topic/8280-atp/#findComment-119690
Share on other sites
Ait Rising Star

Ait

Posted
  • Author
Posted
Originally posted by nismoR34

I live in Malvern East, on the other side of dandy road to ATP...but i dont live ON dandy road - too many fumes he he

Ahh..me too. Which area? I'm down the end of waverly road. Do you drive a yellow R34?

Anyway that ATP guy, didn't quite get a good impression of him when I took an NA car there not long ago. He said something like "We don't do NA cars, only turbo cars!?". Seemed pretty huffed about it :D

Link to comment
https://www.sau.com.au/forums/topic/8280-atp/#findComment-121114
Share on other sites
NismoR34 Grand Master

NismoR34

Posted
Posted

sounds like atp are turning out to be just like "all the others" i am really sick of not being able to trust these "tuners"...i have been rolled by too many in the past...:confused: are there any honest people in the automotive indusrty? perhaps why there are a lot of DIY stuff these days? pft / bah

these last few posts probably explain half the reason why i see skylines the minute i leave home, on dandy rd near chadstone etc.

i live just off chadstone road...but my R34 is black, though i have seen a yellow one twice around the corner in webster st...

Link to comment
https://www.sau.com.au/forums/topic/8280-atp/#findComment-122017
Share on other sites
Ait Rising Star

Ait

Posted
  • Author
Posted
Originally posted by nismoR34

sounds like atp are turning out to be just like "all the others" i am really sick of not being able to trust these "tuners"...i have been rolled by too many in the past...:confused: are there any honest people in the automotive indusrty? perhaps why there are a lot of DIY stuff these days? pft / bah

Yup it's hard to find good tuners these days. Those we think are good may turn out to be bad etc. Sometimes reputation is not a good enough gauge.

I'll keep a look out for a black R34 (nice colour!) the next time round. ;) I'm in a dark grey R32.

Link to comment
https://www.sau.com.au/forums/topic/8280-atp/#findComment-122138
Share on other sites
NismoR34 Grand Master

NismoR34

Posted
Posted

seemingly yes...but its a long story...we didnt get to finish what we started...do'h...damn ppl who dont give way to on-coming traffic...now i have bald patches on my tyres...lol

update: hmm, i dont know that he was trying too hard either, but it is an auto [mainly for drag racing purposes].

Link to comment
https://www.sau.com.au/forums/topic/8280-atp/#findComment-128520
Share on other sites
NismoR34 Grand Master

NismoR34

Posted
Posted

hmm, on second thought. I went down there to ATP yesterday [thurs] and had a chat to the guy. They are nice blokes. Helpful and they seem to know turbo's pretty well I think! They have a GSR running 11.7 sec 1/4 mile times. Also featured in fast fours mag [on cover]. The guy said they have never exclusively been just evo /gsr tuners. They have been doing all sorts of turbo's for quite a while now.

They had 3 r33 gtst's [tongue twister] in the shop when I was there. The white project car of theirs is also in a mag [cant remember which one now]. This has 205kw @ the wheels approximately. Last week this ran an easy 13.2 at calder but had major tractions probs that they guys are now addressing before their next run. They are expecting low - mid 12's with their setup.

Mods, include FMIC, bigger turbo, custom exhaust etc...they are quite friendly guys to talk too and I am definately considering taking my car there for mods - they dont do servicing or the like though!

Hope this helps!

Cheers,

Dale.

Link to comment
https://www.sau.com.au/forums/topic/8280-atp/#findComment-129482
Share on other sites
SS8_Gohan Grand Master

SS8_Gohan

Posted
Posted

hey why does everyone want there car to go real fast over 400m, why doesn't anyone want to keep the kick low down in the revs? Cos doing all this stuff makes the boost come on later yeah???

why does no-one want to make a track kinda car, a killer round the corners, and still keep the punch down low. I know that if u drive a car properly around the track u should be able to keep it within the optimum rev range, but not everyone can do that :P

not having a go at anyone, just wondering why everyone is interested in the quarter mile?

Link to comment
https://www.sau.com.au/forums/topic/8280-atp/#findComment-129873
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      Factory oil temp sensor in a RS4V without gauges?

      By GTSBoy · Posted

      And yet....OEMs put both guages and lights into cars, fed by separate primary elements, for a reason. Oil pressure sensors fail at a significantly higher rate than oil pressure switches. When the HMI has 2 outputs, each with its own separate input, the redundancy makes it far more likely that the operator will notice a problem - particularly if one of those systems has a fault. I'll keep my oil pressure switch feeding the dash light, thanks.
    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      So after like 4 hours yesterday and quite a bit of troubleshooting. Come to find out there is a screw on the back of the serial 9 shifter that was screwed in too far from the factory and the manufacturer doesn’t say anything about it but it was stopping all the back gears because it was hitting that. I pulled the shifter out and went through the gears by hand and a vise grip (dont judge me, it was on a lift) and figured out that it wasn’t the trans. So we narrowed it down to the shifter
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Goon of fortune....go on.....spin to win
    • Dose Pipe Sutututu
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Dose Pipe Sutututu · Posted

      Oh you'll be surprised how much the motor breathes when it sees nearly 2 bar of boost. That will definitely pop, but for now, more than happy with 99.99% of the crank case fumes and engine shit going back into the intake.
    • MBS206
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By MBS206 · Posted

      You'll likely find, you never really get pressure to pop that valve.  If you are getting "pressure" it's going out the unrestricted hole before it hangs around to build up and pop the rubber flap. IE, it's headed for the intake pipe. In reality, if we did it right, your "vent" would actually go to a PCB valve at the inlet, and you'd still have the two the intake pipe too. When in vacuum, motor sucks it in, when on boost, PCB shut, and you will be getting enough air flow past (if they've put the catchcan pipe on the inlet in a good spot, at the right angle) which will create suction. Current setup in reality, you're just forcing it to the intake pipe.
×
×
  • Create New...