Jump to content
SAU Community

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

MYGTST,

Don't take this the wrong way, but are you sure? Most people say that they get movement from the HICAS when they don't use the kits.

If your right then I'll just unplug mine, no point spending $300 on a kit to stop a light coming on. And whats to stop us from taking the HICAS globe out of the instrument cluster.

Can anyone else confirm this?

See'ya :burnout:

it didnt move for me after a whole day at wakefield

i just unplug it when i want hicas disabled rest of the time i leave it on

it only takes a couple of seconds to unplug it

or plug it back in

if you want it removed permanently the best thing is to piss off the whole motor assy and put in a pipe like thishicas%20remov%201.jpghicas%20remov.jpg

I want to remove my hicas. I tried disconnecting it as said above but it still felt the same.

I am going to buy a removal kit. As mentioned above you can buy a bar to replace the electrics, or the Tomei lock kit which keeps all the original parts but prevents them from moving. UAS sell both of these items btw.

Is the tomei lock kit suitable for R33?

thanks

Greg

  • 4 months later...
Originally posted by TTZ32

HICAS is active above approx. 60kph and takes inputs from speed, steering angle, throttle position etc.

this is incorrect. HICAS works at any speed.

Start you car and get a mate to turn the wheel, and you'll see the ass end wheels wiggle around a small amount.

I've done it before on my R31 and a mates 31. Both have HICAS.

HICAS at low speeds turn with the front wheels and at high speed turns opposite the front wheels.

OR VICE VERSA.

I can't remember which but it has to be one way or the other.

Yer, it helps well going at 150km/hr+ to glue your car to the road, but i wouldn't know that of course..

I think its a useful thing to have unless you want to drift or building a serious track car.

Mr Rb20 - i think it was around 30-40kg for HICAS on a 32

Start you car and get a mate to turn the wheel, and you'll see the ass end wheels wiggle around a small amount.  
i dont totally agree with this!!! , ive read many expert reports about hicas stating that it only moves the rear wheels once in motion, except when put in diagnostic mode. I know my car doesnt move its rear wheels when stationary, i know the honda 4ws does,.... but hicas,....??

however the point about hicas working at any speeds is fairly correct. when i had a hicas error, which was small fragments of the horn blocking the steering angle sensor it obviuosly couldnt detect the angle of the steering wheel and hence couldnt compute the movement of the rear wheels. This made the hicas light come on. I could make this light come on at very low speeds, this is proof that hicas does work at speeds lower then whatever was quoted before i think 60kmph

but less traction

mine with the HICAS squats quite nice... with around 190 to the treads and it barely brakes traction and that's with 215's.

only breaks if i snap hard to second. but other than that the bit of weight may make a difference ?

maybe not in a full drag car where things are different but maybe for a street going one ???

hhmm... interesting.

what 20kg's less will induce less squat? c'mon...noone is gonna notice that, Are you suggesting that this weight diff and the effect this has on traction is an issue? I think you'd have to get an absonlutely perfect launch for that to be an issue, its less weight than a spare tyre...

I definitly wouldn't say your car is gonna Squat differently with or without hicas...20kgs as a percentage of the weight transfer of a car launching off the line to do a 13sec qtr must be negligable??

Russ

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lol a few are like that with no intention of being reborn unfortunately. 
    • Done, I'll do mine soon too - whenver I take out the car next. I can cheat and make it quieter by turning off VCT at idle too - but I lose the braps
    • All trim back in wired running driving. Few things to follow up on but not far off the return to the road. att.6HN4wP38LTIOISkhA8eACoBFqzfgQMahZPLA8ut0pqE.mp4 att.w2q0ux2PGuqgQTj2Os13cNHQtqcSEcCAhD_CAXy_IQM.mp4
    • The trouble with phone apps is that they really do not know the sensitivity of the mic on each specific phone, whether there is some sort of cover or skin that can change that, etc etc. So the readings off them are not calibrated. You certainly couldn't be sure that you were even within 3 dB. I have the same app on two (actually more than that) different phones/tablets and the readings in the same room at the same time are never the same. I don't mind the apps - they are as useful as a dyno - if you're testing for delta from thing1 to thing2. But not to try to generate some sort of absolute value.
    • I'm gonna use the "Sound Meter" app from the Google Play Store and as close as I can bother to these procedures: 4. TEST METHOD FOR ALL VEHICLES EXCEPT PRE ADR83 IN-SERVICE GOODS VEHICLES AND OMNIBUSES 4.1 Microphone position 4.1.1 The microphone shall be directed towards the orifice of the exhaust outlet and shall be supported by a tripod or similar device not providing excessive acoustic reflection. The general requirements for positioning microphones are shown in the Appendix. 4.1.2 The nominal axis of maximum sensitivity of the microphone shall be substantially parallel to the test site surface and shall make an angle of 45 degrees ±10 degrees with the principal direction of gas flow from the exhaust. 4.1.3 In selecting the 45 degree alignment from the outlet of a motor vehicle fitted with two or more outlets, only the angle resulting in the microphone being farthest from any other outlet must be used. National Stationary Exhaust Noise Test Procedures for In-Service Motor Vehicles Page 3 4.1.4 The height of the microphone above the test site surface shall be equal to that of the orifice of the exhaust outlet ±25mm but shall not be less than 200mm above the test site surface. 4.1.5 The distance of the microphone from the exhaust outlet orifice shall be 500mm±25mm. 4.1.6 [Relates to vertical exhaust outlets] 4.1.7 For vehicles fitted with one exhaust outlet the microphone shall be placed so that the greatest possible distance is achieved between it and the vehicle. 4.1.8 [Relates to multi exhaust outlets] 4.1.9 [Relates to multi exhaust outlets] TLDR: 200mm off ground 45 degree angle relative to exhaust flow 500mm from tailpipe exit. (I probably won't use a tripod) Here's a photo, cause I read the instructions wrong myself.
×
×
  • Create New...