Jump to content
SAU Community

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

MYGTST,

Don't take this the wrong way, but are you sure? Most people say that they get movement from the HICAS when they don't use the kits.

If your right then I'll just unplug mine, no point spending $300 on a kit to stop a light coming on. And whats to stop us from taking the HICAS globe out of the instrument cluster.

Can anyone else confirm this?

See'ya :burnout:

it didnt move for me after a whole day at wakefield

i just unplug it when i want hicas disabled rest of the time i leave it on

it only takes a couple of seconds to unplug it

or plug it back in

if you want it removed permanently the best thing is to piss off the whole motor assy and put in a pipe like thishicas%20remov%201.jpghicas%20remov.jpg

I want to remove my hicas. I tried disconnecting it as said above but it still felt the same.

I am going to buy a removal kit. As mentioned above you can buy a bar to replace the electrics, or the Tomei lock kit which keeps all the original parts but prevents them from moving. UAS sell both of these items btw.

Is the tomei lock kit suitable for R33?

thanks

Greg

  • 4 months later...
Originally posted by TTZ32

HICAS is active above approx. 60kph and takes inputs from speed, steering angle, throttle position etc.

this is incorrect. HICAS works at any speed.

Start you car and get a mate to turn the wheel, and you'll see the ass end wheels wiggle around a small amount.

I've done it before on my R31 and a mates 31. Both have HICAS.

HICAS at low speeds turn with the front wheels and at high speed turns opposite the front wheels.

OR VICE VERSA.

I can't remember which but it has to be one way or the other.

Yer, it helps well going at 150km/hr+ to glue your car to the road, but i wouldn't know that of course..

I think its a useful thing to have unless you want to drift or building a serious track car.

Mr Rb20 - i think it was around 30-40kg for HICAS on a 32

Start you car and get a mate to turn the wheel, and you'll see the ass end wheels wiggle around a small amount.  
i dont totally agree with this!!! , ive read many expert reports about hicas stating that it only moves the rear wheels once in motion, except when put in diagnostic mode. I know my car doesnt move its rear wheels when stationary, i know the honda 4ws does,.... but hicas,....??

however the point about hicas working at any speeds is fairly correct. when i had a hicas error, which was small fragments of the horn blocking the steering angle sensor it obviuosly couldnt detect the angle of the steering wheel and hence couldnt compute the movement of the rear wheels. This made the hicas light come on. I could make this light come on at very low speeds, this is proof that hicas does work at speeds lower then whatever was quoted before i think 60kmph

but less traction

mine with the HICAS squats quite nice... with around 190 to the treads and it barely brakes traction and that's with 215's.

only breaks if i snap hard to second. but other than that the bit of weight may make a difference ?

maybe not in a full drag car where things are different but maybe for a street going one ???

hhmm... interesting.

what 20kg's less will induce less squat? c'mon...noone is gonna notice that, Are you suggesting that this weight diff and the effect this has on traction is an issue? I think you'd have to get an absonlutely perfect launch for that to be an issue, its less weight than a spare tyre...

I definitly wouldn't say your car is gonna Squat differently with or without hicas...20kgs as a percentage of the weight transfer of a car launching off the line to do a 13sec qtr must be negligable??

Russ

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sounds good.  I don't 100% understand what your getting at here. When you say, "I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down" do you mean this - there is a panel with factory paint, without any prep work, they paint the entire panel with primer, then colour then clear?  If that's what you mean, sure it will "stick" for a year, 2 years, maybe 3 years? Who knows. But at some stage it will flake off and when it does it's going to come off in huge chunks and look horrific.  Of course read your technical data sheet for your paint, but generally speaking, you can apply primer to a scuffed/prepped clear coat. Generally speaking, I wouldn't do this. I would scuff/prep the clear and then lay colour then clear. Adding the primer to these steps just adds cost and time. It will stick to the clear coat provided it has been appropriately scuffed/prepped first.  When you say, "but the new paint is landing on the old clearcoat" I am imagining someone not masking up the car and just letting overspray go wherever it wants. Surely this isn't what you mean?  So I'll assume the following scenario - there is a small scratch. The person manages to somehow fill the scratch and now has a perfectly flat surface. They then spray colour and clear over this small masked off section of the car. Is this what you mean? If this is the case, yes the new paint will eventually flake off in X number of years time.  The easy solution is to scuff/prep all of the paint that hasn't been masked off in the repair area then lay the paint.  So you want to prep the surface, lay primer, then lay filler, then lay primer, then colour, then clear?  Life seems so much simpler if you prep, fill, primer, colour then clear.  There are very few reasons to go to bare metal. Chasing rust is a good example of why you'd go to bare metal.  A simple dent, there is no way in hell I'm going to bare metal for that repair. I've got enough on my plate without creating extra work for myself lol. 
    • Hi, Got the membership renewal email but haven't acted yet.  I need to change my address first. So if somebody can email me so I can change it that would be good.    
    • Bit of a similar question, apprently with epoxy primer you can just sand the panel to 240 grit then apply it and put body filler on top. So does that basically mean you almost never have to go to bare metal for simple dents?
    • Good to hear. Hopefully you're happy enough not to notice when driving and just enjoy yourself.
    • I mean, most of us just love cars. Doesnt necessarily have to be a skyline.
×
×
  • Create New...