Jump to content
SAU Community

Recommended Posts

92 MARON R32 GTS-4 MANUAL Type - M

-4WD

-4WS

-GTR BODYKIT

-GREDDY BOV TYPE-S

-SIMOTA AIR FILTER

-SINGLE STAGE BOOST CONTROLLER

-OMORI TURBO TIMER

-TURBO DOWN PIPE WITH SCREAMER PIPE FROM WASTEGATE

-5ZIGEN EXHAUST

-17' ENKEI 3 PEICE RACE RIMS (WORTH $4000 PLUS ON RIMS ONLY)

-NEXEN N3000 TYRES

- 4 POT PISTON CALIPERS

-XCITE LIGHTENED FLYWHEEL (4KG'S)

-EXEDY RACING CLUTH (40%MORE PRESSURE)

-APEX'I ADJUSTABLE SUSPENSION

-SRS DRIVERS SIDE ARIBAG

-CLIMATE CONTROL AIRCON

-BLITZ BOOST GAUGE (WHITE BACKGROUND WITH RED NEEDLE)

-VISION ALARM

-PIONEER HEAD DECK WITH REMOTE

-KENWOOD SPEAKERS

-SERVICED 01/04/05 (NEW SPARK PLUGS,COOLANT,HYDROLIC FLUID ETC...)

-SERVICED EVERY 5'000KM

-TIMING BELT CHANGED

-NEW CLUTCH MASTER AND SLAVE CYLINDER INSTALLED

-NEW AIR FLOW METER

-4WD DRIVETRAIN BEEN QUOTED AS IN "EXELLENT CONDITION FOR ITS AGE"

**Needs tappet cover gasket for RWC** sell with or without RWC adjusting to offer.

URGENT SALE CONSIDER ALL OFFERS (just put on 6mths rego)

0401667214

NORTH QLD

post-17963-1123296676.jpg

post-17963-1123296940.jpg

post-17963-1123297013.jpg

Edited by HRR15
Link to comment
https://www.sau.com.au/forums/topic/83079-modified-r32-gts4-type-m/
Share on other sites

  • 2 weeks later...
  • 1 month later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • thanks mate, one of the reasons I even bought it to be fair.
    • I found parts on EFI Solutions webshop that seemed to be the accurate ones. I haven't gotten around to fitting the turbos back on the car yet since I still have to deal with the shitty crack in the engine block. But I'm confident that the bolts I ordered will fit. According to EFI they are also 7-16/24. The reason M11x1 got involved here is because it is apparently very similar to 7-16/24.
    • Well, to be fair to the car I've driven it daily for almost a decade now, although in that time only put on 50k, as it just recently passed 100k miles early this year. For the most part its been fine because I've been able to source parts from AUS like jacks jdm and a few places in Japan, some things like pads have been easy since 300z pads swap right in... I realize its probably at that time in its life i should find a new DD (but I rent and only have so much space, no garage) so new cars just complicate things. As it is older though, I recognize its about that time as with my '67 GTO to maybe side step and find an alternative, but if i can keep driving it... I want to.   That said, I may just look into a local shop that might be able to, problem is the mechanic I work with has limited space as a mom and pop operation, and he's a busy busy man, so id need to find out if he can keep the car in the meantime, which may or may not be practical for him. Maybe I'll just buy one off jacks jdm and get that refurbed /shrug.. just looking at options and what others may have to offer for advice on the matter. Like I said, its hard finding people around here who actually have one, I've had mine 9 and a half years and I've met 3 others, and they are all military, one was oem from 95 with 30k miles (rip that car... guy got hit after someone crossed s double yellow, totaled it)
    • I've noticed my rear springs sag a bit compared to the fronts. I have stock springs and KYB struts. The front wheels are pretty consistent in their ride height, but compared to the front wheels, one of the rears sits 20mm lower, and the other 40mm lower. This negatively affects the ground clearance, and also angles the headlights up. What are some some economical options for new springs? Or information like good spring rates, lengths  in order to find a suitable replacement etc Far from lowering the car, I'd prefer to raise it a bit to keep it ground clearance friendly.
    • I searched for ages as well, I'm importing an engine to get the head off it. 
×
×
  • Create New...