Jump to content
SAU Community

Recommended Posts

so i lost my licence for 12 months

i got 12 months to do work to the car

i want to get around 350rwkw if thats possible

what mods will i need to do ? and in what order? anyone know

at the moment i have

r33 series 2 gts-t

front mount intercooler

airpod

hks bov

hks 3" exhaust

custom dump/screamer pipe

3" front pipe

cat has been 'damaged'

whats the next list of mods in what order? any help greatly apreciated

thanks

Anything is possible :), just depends on how deep your wallet is.

I can start you off with a pointers though, but it really depends on your budget. At 350rwkw you'd need to get the internals done as well, as thats really pushing the standard internals.

- Full ECU (powerfc?)

- Larger injectors (550cc might be ok, unsure)

- new AFM (Z32?)

- Larger fuel pump (bosch 044?)

- Larger turbo (GT30 or GT35?)

- Boost controller (any of those jap ones are good :)

- Larger cams (tomei poncams 256/264?)

That would probably get you in the right direction, but then you have your internals as well, like pistons, rods,abit of head work etc.

With that type of power you should also get a matching suspension (whiteline handling kit would do u wonders) and brake (brembo calipers with some dba slotted rotors?) setup to help you control your newly gained power.

You lost your license for 12 months and you want to increase the power of your car by 200kws ?

it shows loosing ure licence doesnt teach ppl a lesson

heh

yeah, but ill be keeping it to the track next time and to the drag strip ive learnt my lesson.

Anything is possible :), just depends on how deep your wallet is.

I can start you off with a pointers though, but it really depends on your budget. At 350rwkw you'd need to get the internals done as well, as thats really pushing the standard internals.

- Full ECU (powerfc?)

- Larger injectors (550cc might be ok, unsure)

- new AFM (Z32?)

- Larger fuel pump (bosch 044?)

- Larger turbo (GT30 or GT35?)

- Boost controller (any of those jap ones are good :)

- Larger cams (tomei poncams 256/264?)

Would he still need a Z32 AFM with a power FC?

Would he still need a Z32 AFM with a power FC?

shit yeah, youll max out the stock airflow meter at 250rwkw

unless you mean that by saying do you still need an airflow meter?

then if he got the d-jetro then you dont need an airflow meter but then the car is a bitch to tune and will run less superiror than the airflow meter setup

Q45 and a GT35R with a .82 turbine housing.

Set of cams.

Spend the rest of the money on a set of Toyo RA1's, RE55s - S for super soft compound. :D

Possibly even a better option again. Nitto drag spec.

What did you loose your license for?

12months, it must of been something drastic.

If it was for speeding or being stupid on the roads consider spending a little on a driving course so you can see how dangerous and uncontrolled a car can be.

when you've got cars pumping out 400-450rwkrw on pulp wuithout much effort at all...

350rwkw is hardly a need for race fuel

And you certainly dont need 2 GT30's to do it. Have you ever made 350rwkw?

And yes... my motor is for sale. Depending on what you want etc. Might save you a lot of time hassle and money

when you've got cars pumping out 400-450rwkrw on pulp wuithout much effort at all...

350rwkw is hardly a need for race fuel

And you certainly dont need 2 GT30's to do it. Have you ever made 350rwkw?

And yes... my motor is for sale. Depending on what you want etc. Might save you a lot of time hassle and money

hey on a totally offtopic and unrelated reply, the link in your sig to your for sale thread is b0rked R31Nismoid ^_^

when you've got cars pumping out 400-450rwkrw on pulp wuithout much effort at all...

350rwkw is hardly a need for race fuel

And you certainly dont need 2 GT30's to do it. Have you ever made 350rwkw?

And yes... my motor is for sale. Depending on what you want etc. Might save you a lot of time hassle and money

But someone had to use straight 104 octane to get that power reading!!! :lol:

To the guy that started this thread, if you already lost your license for 12 months, and now want 350rwkw, hopefully you have saved money for a head stone also????

But someone had to use straight 104 octane to get that power reading!!!  :lol:

To the guy that started this thread, if you already lost your license for 12 months, and now want 350rwkw, hopefully you have saved money for a head stone also????

leigh i say get as much power as u can all u need to remember is where and when u use it ive being in the same boat as leigh all i can say is f*** yea pump out the figures only young once!!!!!!!!

But someone had to use straight 104 octane to get that power reading!!!  :lol:

To the guy that started this thread, if you already lost your license for 12 months, and now want 350rwkw, hopefully you have saved money for a head stone also????

so?

simply replace with a GT35 and bobs ur uncle. they are the same dimensions so its direct swap.

Although 350rwkw and traction are two things that dont work together one little bit no matter what you do :O

Lets no get onto your car :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's unfortunate what Tomei USA has done to Tomei's name in general. I'm very weary of ordering parts from them now. I only order direct from a Japanse source (e.g Nengun). At least their logos are different, so you end up knowing what you have. 
    • Update Issues 5 (plus #4) - 10 After making a claim about issue #4's missing part, DeAgostini Japan sent a whole new issue #4 and it arrived about 2 weeks after that. That was back in early March. It took another 4 weeks to receive issues 5 - 13 though. This update is for issues 5 - 10. Ove the 5 issues the front left suspension and most of the engine have been completed. The quality of the castings and fit of the parts is quite good, it seems better than DeAgostini's BNR34 Skyline GT-R from the Fast & Furious 2 movie, which (to me anyway) doesn't seem to have as tight tolerances or quite as accurate castings.  Each issue has a lot of info about the 1989 - 1993 Skyline range and other Nissan models from that era, but the focus is on the BNR32 Skyline GT-R Nismo and the various racing it did in Japan, Europe (Spa 24hrs) and of course Australia. I've included some text translated with Google Lens in some photos and will add to them if there's anything worth including. 
    • If it's for a SR20, make sure it's not the American Poncams, might as well call them Poocams. Had a set in a friend's car, all scuffed up after a few track days. Like the metallurgy Tomei USA used is junk. Went back to JDM OG Tomei Poncams, no issues till now.   Tomei USA is not the real OG Tomei.   Random rant over, fk the US of A, bunch of c u n t s. 
    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
×
×
  • Create New...