Jump to content
SAU Community

Recommended Posts

so i lost my licence for 12 months

i got 12 months to do work to the car

i want to get around 350rwkw if thats possible

what mods will i need to do ? and in what order? anyone know

at the moment i have

r33 series 2 gts-t

front mount intercooler

airpod

hks bov

hks 3" exhaust

custom dump/screamer pipe

3" front pipe

cat has been 'damaged'

whats the next list of mods in what order? any help greatly apreciated

thanks

Anything is possible :), just depends on how deep your wallet is.

I can start you off with a pointers though, but it really depends on your budget. At 350rwkw you'd need to get the internals done as well, as thats really pushing the standard internals.

- Full ECU (powerfc?)

- Larger injectors (550cc might be ok, unsure)

- new AFM (Z32?)

- Larger fuel pump (bosch 044?)

- Larger turbo (GT30 or GT35?)

- Boost controller (any of those jap ones are good :)

- Larger cams (tomei poncams 256/264?)

That would probably get you in the right direction, but then you have your internals as well, like pistons, rods,abit of head work etc.

With that type of power you should also get a matching suspension (whiteline handling kit would do u wonders) and brake (brembo calipers with some dba slotted rotors?) setup to help you control your newly gained power.

You lost your license for 12 months and you want to increase the power of your car by 200kws ?

it shows loosing ure licence doesnt teach ppl a lesson

heh

yeah, but ill be keeping it to the track next time and to the drag strip ive learnt my lesson.

Anything is possible :), just depends on how deep your wallet is.

I can start you off with a pointers though, but it really depends on your budget. At 350rwkw you'd need to get the internals done as well, as thats really pushing the standard internals.

- Full ECU (powerfc?)

- Larger injectors (550cc might be ok, unsure)

- new AFM (Z32?)

- Larger fuel pump (bosch 044?)

- Larger turbo (GT30 or GT35?)

- Boost controller (any of those jap ones are good :)

- Larger cams (tomei poncams 256/264?)

Would he still need a Z32 AFM with a power FC?

Would he still need a Z32 AFM with a power FC?

shit yeah, youll max out the stock airflow meter at 250rwkw

unless you mean that by saying do you still need an airflow meter?

then if he got the d-jetro then you dont need an airflow meter but then the car is a bitch to tune and will run less superiror than the airflow meter setup

Q45 and a GT35R with a .82 turbine housing.

Set of cams.

Spend the rest of the money on a set of Toyo RA1's, RE55s - S for super soft compound. :D

Possibly even a better option again. Nitto drag spec.

What did you loose your license for?

12months, it must of been something drastic.

If it was for speeding or being stupid on the roads consider spending a little on a driving course so you can see how dangerous and uncontrolled a car can be.

when you've got cars pumping out 400-450rwkrw on pulp wuithout much effort at all...

350rwkw is hardly a need for race fuel

And you certainly dont need 2 GT30's to do it. Have you ever made 350rwkw?

And yes... my motor is for sale. Depending on what you want etc. Might save you a lot of time hassle and money

when you've got cars pumping out 400-450rwkrw on pulp wuithout much effort at all...

350rwkw is hardly a need for race fuel

And you certainly dont need 2 GT30's to do it. Have you ever made 350rwkw?

And yes... my motor is for sale. Depending on what you want etc. Might save you a lot of time hassle and money

hey on a totally offtopic and unrelated reply, the link in your sig to your for sale thread is b0rked R31Nismoid ^_^

when you've got cars pumping out 400-450rwkrw on pulp wuithout much effort at all...

350rwkw is hardly a need for race fuel

And you certainly dont need 2 GT30's to do it. Have you ever made 350rwkw?

And yes... my motor is for sale. Depending on what you want etc. Might save you a lot of time hassle and money

But someone had to use straight 104 octane to get that power reading!!! :lol:

To the guy that started this thread, if you already lost your license for 12 months, and now want 350rwkw, hopefully you have saved money for a head stone also????

But someone had to use straight 104 octane to get that power reading!!!  :lol:

To the guy that started this thread, if you already lost your license for 12 months, and now want 350rwkw, hopefully you have saved money for a head stone also????

leigh i say get as much power as u can all u need to remember is where and when u use it ive being in the same boat as leigh all i can say is f*** yea pump out the figures only young once!!!!!!!!

But someone had to use straight 104 octane to get that power reading!!!  :lol:

To the guy that started this thread, if you already lost your license for 12 months, and now want 350rwkw, hopefully you have saved money for a head stone also????

so?

simply replace with a GT35 and bobs ur uncle. they are the same dimensions so its direct swap.

Although 350rwkw and traction are two things that dont work together one little bit no matter what you do :O

Lets no get onto your car :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back in January, I noticed my car felt noticeably weak. I had the injectors cleaned, which seemed to solve the problem -- until now. Recently, the car suddenly lost power again while driving. Suspecting the injectors, I brought it to the mechanic. He recommended replacing them entirely, saying the current ones were getting unreliable and fiddly to work with. I could not find a direct replacement for my current injectors. The closest match I found were 440cc injectors. This led me to look into the possibility of upgrading -- and of course, that would mean remapping the ECU. From my research I found: The OEM Part numbers are 16600-72L20 and 16600-72L21 Both the RB20DE and RB20DET use the same 270cc injectors. There are much better options out there over the old OEM injectors. Nistune could be a viable tuning option. While the RB20DE isn’t explicitly listed on their site, the ECU is essentially the same as the GTS-T version - just with a different map. The ECU code on mine is listed as supported. One concern is finding a tuner who works with Nistune. Aftermarket ECU like Haltech and Link, but this would be the most expensive choice (and possibly overkill for a mostly stock RB20DE) I admit that I am very new to the tuning scene and would appreciate any insight or recommendations regarding this.   These are some SAU links where I got some of my information from for reference: https://www.sau.com.au/forums/topic/380324-rb20de-injectors/ https://www.sau.com.au/forums/topic/477396-factory-270cc-injectors/  
    • The inspectors are not forensic by any means but if you forge your documents and/or badgings on vehicle parts and are found out, the consequences are just far bigger than if you just run illegal parts. And their job quite literally is to cross reference what parts you got installed and what your papers say you got. Something as silly as your suspension being 1mm too low will fail you. Nonetheless I asked if someone knew the damn pipe and I certainly did not ask for smartassery or underhanded comments, no idea why you need to be told this. Great way to waste both our time.
    • As useful as you explaining what forgery is... But then again, I wasn't aware your inspectors were also forensic experts and inspect nameplates on each component to confirm everything is original. They must inspect roughly 3 cars a year at that rate. You're right though, my comment doesn't help you in anyway, so I'll go talk to my wall now. Cheers. 
    • Say that to the guy that is going to fail your inspection or tow your car for illegal exhaust modifications. If you have anything else useful to say, please go tell your wall.
    • You must be fun at parties. 
×
×
  • Create New...