Jump to content
SAU Community

Recommended Posts

hi people,after a bit of advise

i own a Series 2.turbo rattles alot,seems when i pushed down on the butterfly or the rod thats attached to the actuator its seems to make it quiter.I also have a idle problem it starts on 1500 then drops,on a cold day or when it feels like it,it rises to 1500 again.

only reacantly bought the car its a good looking car

its the standard SERISE 2 IN COLOUR

with white six spoke tsw racing wheels

coil overs

STARUT BRACSE COMING OUT OF IT A@@E

fmic

micro lt-8

bov

air filter

system

custom plates

anyway i veiwed the car a few times and IT all looked good,he was asking 22,000, after taking it for a drive i noticed it had oil coming out of the bov not to menion quite a bit of smoke.

So i left my number with a offer of 16.000, he rang back that day confiming the motor my be @@@@ed

i bought the car drained out 13 LITERS OF OIL put some motul

in it,changed the basics at the same time,and it runs sweet HOW LONG FOR IM NOT SURE BUT I HOPE IT LAST A WHILE 160KW@WHEELS ON STANDARD BOOST :lol: :D

Link to comment
https://www.sau.com.au/forums/topic/83375-r33-sr-turbo-rattles/
Share on other sites

hi people,after a bit of advise

i own a Series 2.turbo rattles alot,seems when i pushed down on the butterfly or the rod thats attached to the actuator its seems to make it quiter.I also have a idle problem it starts on 1500 then drops,on a cold day or when it feels like it,it rises to 1500 again.

only reacantly bought the car its a good looking car

its the standard SERISE 2 IN COLOUR

with white six spoke tsw racing wheels

coil overs

STARUT BRACSE COMING OUT OF IT A@@E

fmic

micro lt-8

bov

air filter

system

custom plates

anyway i veiwed the car a few times and IT  all looked good,he was asking 22,000, after taking it for a drive i noticed it had oil coming out of the bov not to menion quite a bit of smoke.

So i left my number with a offer of 16.000, he rang back that day confiming the motor my be @@@@ed

i bought the car drained out 13 LITERS OF OIL put some motul

in it,changed the basics at the same time,and it runs sweet HOW LONG FOR IM NOT SURE BUT I HOPE IT LAST A WHILE  160KW@WHEELS ON STANDARD BOOST  :lol:  :)

ok some good english skills would be a bonus. if we can't read it, we can't help. blowby in the intake or at the bov is not a good sign of things to come. sounds like the turbo seals are on the way out or are leaking somewhere. wipe the oil away and see if it goes away. if it comes back then the seals are probably shot to pieces. what boost is it running? id say turn it down to stock until you work out whats wrong. running more pressure with other stuff wrong is just asking for it to go bang. take it to a mechanic and find out the deal the wierd idle and rattling. its hard to diagnoise something like that on a forum. much easier in front of you

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • But it's much better to use a freedom unit that has four different possible meanings...
    • I would try messing with friction modifier to see if it smooths it out.  Just keep adding more until it stops chattering or grabbing quite so much. If you haven't changed the gear oil in a long time you may as well start there too in case that has anything to do with it. You might want to also verify the initial torque is set to the lowest setting too. Requires popping out one of the CV axles first but that's not too bad. Once you're sure the preload is set to the lowest you can try adding an ounce at a time of friction modifier until it feels right to you.
    • It is possibly 55 degrees for the Nismo version. I had a look through the manual and the stocker has a breakaway torque of 2.5 to 3.5kgm. Supposedly the Nismo LSD goes down to 5kgm when worn in but it is pretty grabby even with very little throttle. Worse when cold. So I guess you have three things. 1. Shims. 2 Friction plates 3. Cams Would think shims would be the easiest but Ive no clue how many tenths of a mm shim thickness change equals how many kgm torque. Also not sure if the Nismo friction plates are similar/different to stock or if they are the most of the source of the diff being angry. Think I can write off the Nismo rebuild kit for the standard diff as not being what I want.  
    • Yeah, it was a bit of confusion with me, I rang and asked if they had a boot for a soft top, and then the paint shop when they rang and were asked if it had a hard top on it, which it does, just not a PRHT....LOL Meh, whilst frustrating for all concerned it isn't a war stopper and should be a thing of the past in a week or two In other N/A related news, car is booked in at the end of the month for the cams, springs, retainers, harmonic balancer and retune  I might even pull the lazy arse card and get them to do a full service on it whilst it is there
×
×
  • Create New...