Jump to content
SAU Community

Recommended Posts

Just wondering if its natural for stock n/a 33 to have a rattly muffler??

also, what should i look for when purchasing one?

that sounds a little like what my car does, a rattle noise happens when i get up in the revs and i thought it was just my stock exhaust system but i now have a new one and it still happens, now that im thinking of it i think it goes away after driving for a while and getting the car warm. i would also be interested what this sound is and how i can get rid of it.

Link to comment
Share on other sites

The rattle in your exhaust you will find is probably the catalyic converter, the honey comb-like inside has probably came loose, un do that and have a look inside, if its that, bash it out and replace it with a new catalyic as soon as possible.

Hope this helps mate.

Dayne

Link to comment
Share on other sites

If a muffler is faulty you can tell by stabbing at the throttle at idle and then quickly taking your foot off. If it makes a rattling/hissing noise then either you muffler or catalitic convertor is loose or faulty. Another way to check this is to get under the car and hit it with your fist. If it's a solid noise then its fine other if it makes a rattling noise there is your problem.

Eli, is your exhaust a cat back exhaust? The dump pipe to the cat convertor is protected by a heat shield which encases the pipe inside. They can come loose and rattle but will only make a noise in the case of idling normally. A couple of ordinary hose clamps wrapped tightly around the heat shield should fix that. If any of those things dont help then its not your exhaust system.

Hope that helps.

Link to comment
Share on other sites

yeah, I done a search after i posted :) ....

the thing is, there seems to be more than 1 solution to fixing it...

I just purchased one with a rattly exhaust (1st oz owner) and the guy told me it happens on all n/a r33s and can be fixed with an aftermarket exhaust...i was wondering if he was b/s'ing me....it doesnt rattle whilst idling though ...anyway..thanks

Link to comment
Share on other sites

it does happen to all of them and its almost never something rattling. Its resonance in the exhaust system that becomes more pronounced as the packing in your muffler gets old and the cat deteriorates. Yes a well built aftermarket exhaust will fix it, if u take it to someone that doesnt know what they are doing it will just amplify it....

Link to comment
Share on other sites

Its resonance in the exhaust system

Its almost never something thats come loose.... resonance is something that twin cam engines do. Too hard to explain how it works but its that rattling sound u hear... u need an exhaust shop that knows what there doing or follow the write ups that are in this section of the forum.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
    • They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
    • Thanks for the replies guys, it's really appreciated.  It seems the kit was supposed to come with those injector bosses but hasn't. Unsure if they'll help as even with the adaptors to make them a 3/4 height injector they still sit too far out so mount the fuel rail?
×
×
  • Create New...