Fs:excellent Cond. Vg30 Turbo

[VLRB20]

I have one VG30 turbo, in excellent condition, has done less than 20000kms on standard boost... the 90 degree bend coming from the turbo inlet is painted silver with a standard rb20 wastegate to go around the inlet!

Pics on request...

Pm with your email address or call on 0407355454 with any questions or queries....

thanks for looking

[PRO_32]

where you located

[VLRB20]

I am in ACT

here are some pics, forgive the quality my camera is rubbish...

to answer a few questions, i have fitted the rb20 90 bend inlet to the turbo to allow the intercooler pipes to fit up in the same posistion, fitting the bend ment i had to change the wastegate to accomodate the actuator movement was not obstructed and the easiest way was to fit the standard rb20 wastegate. It does bolt up to all the same fittings and bolt sizes including dump pipe and will be a straight change over...

and for those of you who think it is a standard rb20 turbo, notice the size difference between the rear housing and a standard one

thanks again

[caminperth]

Is this VG30 from the 300zx twin turbo setup or the single setup?

[VLRB20]

it is from the single setup!

http://www.skylinesaustralia.com/forums/in...ic=78983&st=240

I have done the mentioned measurements in this link and got exactly the same results as Cubes, therefore proving it is a genuwine VG30 turbo