Jump to content
SAU Community

Recommended Posts

to add front downforce? i think i know the thing you're referring to... and if i'm thinking of the right thing - when you think about it, if it's angled down at high speed, it's going to push the front of the car down...

like ---> /

but if it's angled up at low speed...

like ----> __ (but say, raised up at more of an angle, duh ;))

then it's not going to make as much downforce, as it's not needed at those speeds...

It comes down at speed to lower the amount of air going under the front of the car, this increases aerodynamic efficiency and downforce (more grip).

It goes up at low speed because aerodynamics dont matter much at low speed (drag coefficent is proportional to velocity squared) and you will probably break it off on a gutter etc.

I believe it's on some R32 GTST. I was looking at an example WAY back when grey imports were just starting to become popular and it's a pretty funky gizmo. It simply adds downforce at high speeds and goes away at low speeds so you get some ground clearance.

I've got one on mine, maybe it was a factory option? All I know is it activates when you go over 70km an goes back up at 50km.(you can hear it go up and down if you turn the radio off) There is a button to raise and lower it yourself but it only works if you have the handbrake up, my guess so you can lower it when you wash your car or something. I agree it adds downforce when you are at higher speeds.

As for a GTR, they already have a grey strip on the front bar that sits lower than the rest of the car so I guess it does the same job.

Didnt some of the R31s have this too?

The HR31 GTS-X came out with the "flip-down spoiler" which worked really well at speeds over 100kph. It was about 6" from top to bottom and would drop the nose of the car and give much better steering feedback. ( See below pic of my 31 with spoiler extended ).

On the 32's it retracts up and down and is so small and ineffective ( and heavy ) that almost everyone removes it from their car ( usually in favour of a FMIC ).

post-2420-1123814268.jpg

haha even nissan believed in "rice", was surprised to find my R32 with this option, seems to be quite a popular one, however you can feel that there is more stability at freeway speeds, compared to stock r32 without one.

My HR31 GT Passage had this Auto Spoiler, looks mad when its down, also some Hr32 GTs-T Front bars we have at work have the 2 spoiler motors and the big spoiler that flips down at the front.. its just another fancy gizmo that the japs love, i reckon it looks cool...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have engineer in my job title One of or motto's though is "we make and we break"
    • This is actually 2 whole different trains of thought that need to be addressed separately. No, as Matt says above, "Engineer" is not a directly protected title. A lot of guys who just do mechanical design via CAD, with or without even some sort of associate diploma in engineering, often have the job title of "Design Engineer". A train driver can probably still describe themselves as an engineer. But, to usefully get employment with anyone as a proper engineer, you're going to have to have at least the necessary and relevant degree qualification. You're not going to get a job as an electrical engineer if you have a chem eng degree, unless you can demonstrate x number of years of working in that capacity, sufficient knowledge, etc. Having the degree is at least in indication that you've seen the relevant text books, even if you haven't read them (like pretty much the last 10 years of graduates!). To be a self employed engineer.....you could get away with quite a lot pretending that you're suitably qualified, without actually being a proper engineer. But, you will find yourself unable to work for a large section of the client space because a lot demand CVs and capability statements when considering contracting for any engineering work these days. Insurances too. If you're not a proper engineer, it will be much harder to obtain proper PI insurance. Insurance companies have gotten hip to that. The "Professional Engineer" thing is a thing in Australia. If you have the right qualifications and experience you can apply to the relevant engineering top level body (mostly Engineers Australia, the less said about whom, the better), to be assessed and approved as a Chartered Professional Engineer, CPE. There are high bars to get over and a requirement for CPD to maintain it. The RPEQ thing is similar-ish, in that you have to demonstrate and maintain, but the bars are a little lower. It is required to be RPEQ in order to sign off as an engineer on any engineering design in Queensland. The other states haven't fully followed suit yet. There's "engineering" and there's "engineering". Being an engineer that signs off on timber (or even steel) frames for housing projects, council creek crossing bridges, etc, is a flavour of civil engineering that barely warrants the name, description and degree. That would be soul crushing work anyway. Being an automotive engineer working in the space where you have to sign off on modifications to cars and trucks would also be similarly soul crushing. At least partly because of the level of clientelle, their expecations, depths of bank balance, etc. And that brings us to your second question. No, we do not have professional engineers "do vehicle inspections". Well, not the regular roadworthies, etc etc. That's done by mechanics. There might be some vehicle standards engineers at the various state govco inspection stations where cars go to get defects cleared and so on, but that's because they (the cars) are there specifically for defect inspection and clearance and so the stakes are a little higher than on an annual lights and brakes working check. But, if you modify a vehicle in Australia, you have to get it engineered. A suitably qualified (and effectively licensed, which I will get back to) automotive engineer will have to go over the application, advise on what would be required to make the mods legal, supervise some parts of the work, inspect and test the results, and sign off. The "licensed" aspect comes from there being a list of approved engineers to do these things in each state. They have to jump through hoops set up by the govco vehicle standards divisions that mean only the suitably qualified can offer to and approve such mods.
    • It's got a problem Prank... It looks like both washer spray caps have fallen off this car... 😛
    • Meh, it's only got to last another 10 years or so until you'll be forbidden to drive it. Keep it dry and forget about it.
    • The title of Engineer is not protected. However different states have different rules about what an Engineer requires to operate. Engineering for a motor vehicle modification is very different to engineering for a bridge, electronics, etc, including what that engineer needs as certifications.   In Canberra, "Engineer" is the loosest category with basically nothing stopping you calling yourself and engineer and designing a bridge or building. From what I've reviewed, QLD has the strictest requirements through RPEIQ.
×
×
  • Create New...