Jump to content
SAU Community

Recommended Posts

Clearing out my garage... LIST UPDATED

RB20DET Silvertop-

*Complete Head (Hydrolic Lifters, shaved and O-ringed) $200

*Bottom end (crank shaft, Bored for 50thou oversized pistons) $200

*Copper Head Gakset (perfect condition) $100

*Shot-peened Conrods $50set

*Air Con Compressor $100

*Power Steering Pump $100

Other Gear

*S13 Silvia/180SX Stock Castor/Radius rods (pair in perfect condition) $80

*S13 Silvia/180SX/R32 Tein Castor rod (1only in good condition) $50

*Duel Stage boost controller with incabin switch - SOLD

*18" Chrome BSA rims 3 of - $200 each (no longer make so perfect for someone who has cracked one as i did haha)

*2 10" Kicker subs in box - SOLD

*Kicker 12" subwoofer in Kicker ported box - AS NEW $150

*Sony Xplod CD/MP3 player with remote etc - SOLD

*Jaycar Responce amplifier 2X100WRMS $100

*Jaycar Amp and Kicker 12" sub together for $220 (perfect match, the pump together)

*Blaupunkt Acapulco CD/MP3 player 2 weeks old, perfect condition- RRP $659 - $250

I have pictures of all items so if your interested in anything just ask and i can send you pictures or give you more info if i can (eg measure ments etc or what ever you need) just let me know...

Post here, PM me, or email [email protected]

Edited by osiris23

Ulladulla... NSW south coast. about 3 hours south of sydney...

Monster Tacho SOLD

Pending payment for Radius rods.

Anyone interested in anything?

2 10" kickers sold...

12" kicker in kicker ported box for sale - $150 in perfect condition.

Prices are all negotiable so let me know if your interested in anything.

  • 2 weeks later...

hey im not 100% sure of the thickness of the head gasket but im pretty sure its 20thou... not sure of the compression...

RB20 head price frop to $200

RB20 Bottom end price frop to $200

$350 for the both..

CD player and boost controller SOLD.

well it was from my 180 and it was pretty highly modified... GT2840 turbo etc and was running 20pound boost and it might have leaned out or something not sure and cracked a ring lan on the 1st pistion, had some detonation on number 1 and 3.... so yer it didnt actually kill it, it wasnt bad enough that it wouldnt drive still it just deloped really bad blow by and then after pulling it apart we found the piston the way it was.... it didnt stuff the bore or anything though and as said is bored out for 50thou over sized pistions, I have all 6 pistons still if it would help at all but ofcause 1 is worthless...

If your interested or anyone else is interested ill do the head, bottom end, copper head gasket, conrods plus other parts i have laying around for say $450.... Bargin seeing justjap wanted $1300 for a head and bottom end, nothing else just stock...

[email protected] if your interested..

About 1½ months but stored well....

I have someone most probably comeing this weekend for the whole lot so i guess we'll see after this weekend...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are adaptors that allow you to delete the booster and use an s15 clutch master cylinder.    if you want to keep the booster they are still available brand new 
    • I visited again today: It would appear they have painted the main body of the car and some parts of some of the panels, so I can say that I now have BMW parts in my car, much to the envy of @Dose Pipe Sutututu It is still covered in dust which is quite the tease but I did look at a few circumspect spots that will be behind bumpers and such and wiped some dust away: After my repeated begging to PLEASE DONT PAINT OVER THE ENGINEERING CERTIFICATE (you have to re-engineer the entire car if they do) I see THIS: Which is great. Excellent job tbh at least to me. A better non dusty example would be the backs of the doors that have been painted: Giving a reasonable contrast between old and new (I know the old isn't clear coated on the inside of doors). The door card will well and truly cover where the old paint is, you can see in the second pic some of the black butyl/whatever shit is sticking the plastic sheet behind the door transfer that has happened since it's clearly been stuck back on. The most maddening thing about this colour is every time I saw it in the wild it looks like another colour, same with photos of many cars with the same colour looking wildly different in every photo anybody ever takes and this is no exception. But stand a little further back and it suddenly looks dark AF. I did tell them when I was discussing which of the 70 million charcoal colours to choose from (a porsche one, a BMW one, or a R32 GTR one etc) that if they just ignored me and chose one at random I would probably never notice. Maybe they did. But the colour is supposed to be B39 (BMW Mineral Gray). Boring I know, but the R34 sedan (to me) really shows off it's boat-ness when you paint it in a bright colour like bayside blue or white or whatever else. I do have a fondness for AR2 Nissan Red, but decided against that because it'll have pretty odd contrast to random bits unpainted (like engine bay, bits of trim etc, and maybe it'll fade). And people will always fkin comment on AR2. Everything remains super dusty. I have tracking numbers for the new heads, as well as some Improved Racing goodies, but they probably will be a next year thing by the time they end up on the car. I did some maths on the heads and I know why nobody goes to this extent in Australia, because it's really not worth it, given I could have just CNC'ed my current heads, bought a FAST102/TB and used my current rocker/spring/cam combination and get a 383 stroker (or stroked a 6.0 GenIV bottom end to 6.6L) built for the same price of just the setup in the mail/on the floor here. Or I could have bought a LS3 and a Drysump system. And then have a complete engine to sell. Oh well
    • We just disconnected the vacuum line if I remember correctly, booster is still there. Is there a rebuild solution for the booster or a different adapter that will work for GTR chassis?
    • Yeah 4wd (boosted) has a recess in the firewall for the booster, and 2wd is flat - the example in the link shows the flat surface. When you deleted the booster, did you just attach the factory slave cylinder directly to the recess in the firewall with no adaption?  
    • Yes, but no. You need to keep the mating surfaces bare (ie the flat faces where the caliper and upright pads touch the dogbone) and also the internal threads will remain bare (unless there are no internal threads - do they use nuts on all the bolts?). So you can slow down obvious external corrosion, but not all of it. Anodising would be required to provide decent protection to the alloy, but I'm not actually sure if you should anodise something that is all about the strength. Anodising does reduce strength significantly. Like, up to 50% on some alloys for high thickness coating.
×
×
  • Create New...