Jump to content
SAU Community

Recommended Posts

Hey Binky, sorry to interrupt with your quest for the offset... but is that a GTR front lip on your GTT? That is mounted to the standard bar right?

Where did you get it and for how much if you don't mind me asking...

Sorry to interrupt once again :P

I don't know the wheels offsets exactly but I know that wheels that fitted an R33 will fit an R34 properly.  R32 are different.

what did the wheels you are looking at come off?

Haven't actually bought them yet, still not sure if they will fit.

http://www.skylinesaustralia.com/forums/in...showtopic=83837

Meh, 18's suck!!

The Te37's on the GTR rub the arches front and rear, cost too much for rubber, have limited access to semi comp rubber and don't feel as good on the road. Too little tyre, too much wheel = harsh ride. They are also prone to understeer due to the amount of mass away from the centre of rotation.

I'd sell mine in a second for a decent set of 17's with enough cash adjustment.

I just had a look at the spare set of R34GTt wheels I have here and they are 225 from side to side on the tyre, so say 215, and 154 from back of tyre to mounting face so say 150. This would suggest 215/2=107 being halfway and 150-107=43. So about 40 offset.

The wheel markings are 17x7 1/2 JJ and another marking simply states 40 which could be the offset.

What the clearances are over the brakes I couldn't say.

+30 should fit fine. The standard GTT wheels are +40 and they sit way in the guards. +30 will see your wheels come out by another 10mm which is not a lot. I once tested a +22 wheel on my GTT and it pretty much sat flush on the guards. Just make sure they clear ur brakes :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...