Jump to content
SAU Community

Recommended Posts

cheers for uploadin the vid. twas a rather good day, i came 3rd in class and 11th overall. not as well as id usualy like to do but i had a s**t load of fun and my UsedTyreMart tread is still road worthy.

Link to comment
https://www.sau.com.au/forums/topic/84158-motorkana-vids/#findComment-1524463
Share on other sites

Its also a 5speed.

My others halfs brother has a lease VRX 5 speed from Mitsi's.

I'd say it pretty much is as fast, the bottom end poke of the little 3.5ltr is amazing from such a small motor.

Quite silly having such a motor in a FWD, rolling on in first has the front 225's smoking by simply mashing the pedal, pretty much you always have to drive around with traction control on unless you are good with throttle control.

The latest model is really good with regards to torque steer, the older shape had you hanging on for dear life with white knuckles as you pulled out of a corner.

But.. its still a fwd Magna.. :P lol

Move back to RWD and drop a decent twin charged 3.5ltr in to it and it may sell a little better. :(

Link to comment
https://www.sau.com.au/forums/topic/84158-motorkana-vids/#findComment-1525821
Share on other sites

That magna is owned by the mitsu plant, and is given to the driver with a new set of tread every event. He has many years of motorkana's behind him and is employed by the mitsu plant.

ps, the event before the 14th (round 3) my mate drinkies (blue four door R32) was second overall, the magna beat him by only 2 seconds.

the magna looks fast, but a skyline going just as fast looks sooooo much betta.

Edited by =premo=
Link to comment
https://www.sau.com.au/forums/topic/84158-motorkana-vids/#findComment-1527051
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The trigger kit I have is similar to the one in the link below. While going through Facebook, I saw someone else mention a similar issue, and I’m starting to think this could be related to the crank gear itself. I understand these parts are CNC machined, but maybe some earlier versions or individual pieces might have slight inconsistencies—it just doesn’t look right in my case. https://www.facebook.com/share/16an8evZd9/?mibextid=wwXIfr I originally installed the crank gear using the thin OEM washer, but as shown in the attached photo, the timing belt walks very close to the edge. When I tried using a Nitto washer—which is thicker—it actually made the issue worse. The belt walks about 1mm off the front edge, which raises more concern about alignment.   I’ve gone through the full process of elimination:   The tensioner pulley and bolt are brand new and installed correctly. The bolt isn’t bent and is oriented properly. The back of the tensioner and the idler pulley are clean and seated correctly. The idler sits slightly more forward, which I understand is due to its design. I’ve experimented with both tight and loose belt tension, but it makes no difference. As soon as the engine runs, the belt immediately walks forward again—even if I reset it beforehand.     At this point, I’m considering replacing the crank gear with your Race Version 1 (12-tooth), but before purchasing, I wanted to ask:   Are you aware of any alignment issues when using this gear? Would this gear help keep the belt aligned correctly, or could the walking still occur? Does it work with a standard missing-tooth crank and rear washer? Is there any specific crank setup or install procedure required?     For reference, I’m not using a front washer, as the PRP crank gear seems to replace the need for one.   Looking forward to your advice.
    • Yep, looks that way. Never driven an E30 or R31 so I can only imagine  
    • Yuh, My new R34 box is sitting on the workshop floor (in its large shipping box, which is a nice thing on its own), along with a front plate to convert to push clutch. There was no way I was interested in rebuilding my existing one. Was only partly interested in the risk of buying a used one. But, if you want a 2nd hander, I can point you to one in/near Melbourne at least. @Komdotkom has one that should be in good enough condition to be usable. I don't think it's in a for sale thread, you'd have to message him. @redzedhas one that definitely needs a rebuild.
    • I used to love going to Amaroo to watch the HQ series go for broke (eventually stopped due to lack of spare parts) and also the Porsche series.  It was so cool to back your car up to nearly the edge of the viewing barrier and party with your friends, having a bbq and alcoholic/non drinks. It was such a family/mates atmosphere
×
×
  • Create New...