Jump to content
SAU Community

Recommended Posts

to my above question

i asked a mate who has had a different sets of rims on hes 32 and reckons that the 18 x 9 +30 will be fine

he suggests a 215 front tyre and 225 rear, i dont mind having tyres stretched a tad and will suit the car nicely

sorry for all this newbie questions not the best with offsets and that

Cheers

u can make it fit, depending on the tyre you run up front and the offset all around.

18x9.5 +35 with 255/35 all round. Would that fit without needing to lip/flare the guards? Also, would that be the most suitable size tyre, or should I be looking at 235/40 or something?

18x9.5 +35 with 255/35 all round. Would that fit without needing to lip/flare the guards? Also, would that be the most suitable size tyre, or should I be looking at 235/40 or something?

235/40 would be a much better option for a daily driver, 255's will scrub on the guards and possibly on the suspension up front. 255's are overkill, especially up front, better of spending more a quality smaller tyre. also not 100% sure about 18x9.5 +35's fitting up front, id be worried about upper control arm clearance, saying that im not too sure how much clearance R33's have.

quick questioin

which would fit better to my sedan

18 x 8 +35 all round

or

18 x 9 +30 all round

car will be fair low as well, so might need liping?

Cheers

depends what tyres u run, if u run relative sizes for each width, for example a 215 on the 8" and a 235 on the 9", the 8" with the 215 will have more clearance both from suspension and guards. 9" will sit a lot more nicer and allow better sized tyres, and still fit as long as u long as u dont run over a 235-245 up front.

to my above question

i asked a mate who has had a different sets of rims on hes 32 and reckons that the 18 x 9 +30 will be fine

he suggests a 215 front tyre and 225 rear, i dont mind having tyres stretched a tad and will suit the car nicely

sorry for all this newbie questions not the best with offsets and that

Cheers

215 and 225 will be fine, but as i said u could get away with a 235 up front, and probably like a 255 up the rear if u really wanted.

  • 2 weeks later...

first id ask why u want to run 255's all round, u could get away with smaller tyres easily while maintaining the same traction. im not 100% sure how much inner clearance there is on a R33, but id suspect u couldnt go much over a +35 at the front, to be safe id probably go +30, even so ur looking at issues with guard clearance. id be going a quality 235 instead, will probably cost similar $$ and provide better steering response and clearance.

first id ask why u want to run 255's all round, u could get away with smaller tyres easily while maintaining the same traction. im not 100% sure how much inner clearance there is on a R33, but id suspect u couldnt go much over a +35 at the front, to be safe id probably go +30, even so ur looking at issues with guard clearance. id be going a quality 235 instead, will probably cost similar $$ and provide better steering response and clearance.

For circuit work, with slicks

For road rally work i am thinking 8F & 9R

  • 2 weeks later...

Hey I'm looking at buying some 20"x8" (yes i know 20s on a skyline is a bit of overkill, i want something that will really fill the guards though)

anyway, just wondering if they will fit

20x8

+42 offset

235/30/20 tyres all round

my cars lowered on adjusties, isn't slammed, sits at a nice level, bit lower than super low king springs

Cheers

and no they aren't bling bling chromies lol, they're dished black wheels

Edited by GTS4onP
Hey I'm looking at buying some 20"x8" (yes i know 20s on a skyline is a bit of overkill, i want something that will really fill the guards though)

anyway, just wondering if they will fit

20x8

+42 offset

235/30/20 tyres all round

my cars lowered on adjusties, isn't slammed, sits at a nice level, bit lower than super low king springs

Cheers

and no they aren't bling bling chromies lol, they're dished black wheels

doubt it, rear they will probably fit no worries, fronts i strongly doubt it, will most likely foul on the UCA's pretty bad.

i want something that will really fill the guards though)

20x8

+42 offset

:P:down::laugh:

Quick question, do you think 17x9 +20's all round with 225/40 tyres would be too much for a R32 GTST 2 door with stock guards at quite a low height (currently 17x7s all round, tyres in guards almost)?

Edited by Ceffy_SA
^^will sit very nice depending on camber, but u will need to roll the guards, no pulling or flaring needed.

Ok thanks that was the answer i was looking for, not my car but a friends, will be having the wheels fitted by Wheelworx this weekend, sill put pics up when its all done.

Any thoughts on R33 GTR rims (17x9) on a 32 GTSt?

I have a set and they fit fine with stretched 215/45/17 rubber. I am planning on using them as track wheels so I can run 235/40/17 RE55's all round and rotate them.

I'm expecting to need to flare the guards a bit but i don't mind that. Might even buy fibreglass front guards that are wider.

I'm a bit concerned about hitting the suspension. Has anyone had this combo before with wider width rubber?

thanks,

Russ

Wheel diameter = 18

Wheel width = 9.5

Wheel offset = +35, but with the 15 mm spacers this has changed. Can somone tell me what they are now? +20?

Tyre size = 235/45/18

Modifications to fit = 15mm bolt on spacers all round to clear the brakes + lipped and rolled guards.

post-43220-1216273660_thumb.jpg

Wheel offset = +35, but with the 15 mm spacers this has changed. Can somone tell me what they are now? +20?

Yeah 20 now. Further out is a smaller number. That's a pretty aggresive offset! Did you need the spacers to clear the suspension?

Any thoughts on R33 GTR rims (17x9) on a 32 GTSt?

I have a set and they fit fine with stretched 215/45/17 rubber. I am planning on using them as track wheels so I can run 235/40/17 RE55's all round and rotate them.

I'm expecting to need to flare the guards a bit but i don't mind that. Might even buy fibreglass front guards that are wider.

I'm a bit concerned about hitting the suspension. Has anyone had this combo before with wider width rubber?

thanks,

Russ

i ran 235/45's all day every day on R33 GTR rims, 17x9 +30 with a 235/45 is pretty much the limit for inner clearance, u wont need a flare to fit it in the guard, but ull need to roll the guard, which is something u need to do to fit any decent size wheel. depends how much camber u are running as well, but imo its perfect size for stock guards.

DSCN0042.jpg

Hi guys, as for me I have

Skyline model = R33

Wheel diameter = 18"

Wheel width = 8" front, 9.5'' rear

Wheel offset = 35

Tyre size = 235/45/18 front, 265/45/18 rear,

as for winter (here in Russia its a bit snowy :D ) I put on rear 245/45/18

post-53258-1216368120_thumb.jpg

post-53258-1216368212_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Appreciate the feedback. It is street car, but not a daily. Last week I got a quote from a good exhaust shop for a decat, one which is bolt-on, bolt-off to be easily replaceable. I got quoted for around €150. I usually do push the motor, but I wasn't in this case to make sure that no damage is done until I get the cat sorted. I think it's best to also ask the exhaust shop for the other option and see what they can do. If (big if) I were to decat though, would it be best to tune the car or would the stock ECU handle it? As far as I know, the stock ECU is not tunable and that would require additional purchases.
    • As above, definitely bash it or get it replaced with a high flow unit.
    • get some flares on them, or wider guards haha
    • Another question sorry, what stainless do u use in the turbo external WG plumb back piping? Is it 321, 316 or 304?
    • Right, its been a while for updating this car, but I made some small but important progress today. In the end I bought an Ecutek dongle from the Australian distributor Tunehouse (for local hardware support) but have gone with a remote tune from Racebox in the US (because they have done millions of these, and I could not find any tuner where I could access the tune anyway as they are all password locked). The App is reasonably easy to work with, but the PC software reminds me of Haltech's ECU Manager that you need to use with the Plat Pro ECUs, it is a nightmare.  Anyway, I sent the details over, got back a tune file and a request for data logs. I finally got a chance to access a private test track today as they want redline logs in 3rd and 4th, and have sent them back for the first round of reviews. The main difference in the tune is going from 1.0 (stock) to 1.3 bar (19psi), although I'm sure is a lot of other stuff in the background. Keeping in mind this is a dead stock car with 125,000klm, this is what the App's performance test claimed: Before After Interesting to note that both 400m tests had the same terminal speed (158klm/h) but different ETs. And no, the speed limiter seems to be higher than that at 186kl/h. Summary of the key logged parameters for the 3rd and 4th gear runs were: Those little turbos were certainly whizzing at 200,000rpm+.  Also I'm really not that excited about oil pressure 55psi at redline so I think I'll go thicker than 5w30 (nissan recommend 0w20....) and see if that improves it. Other than that (and the big boost spike....) everything looks good as a start to me.
×
×
  • Create New...