Jump to content
SAU Community

Recommended Posts

hey

I went to a rim shop today to get a quote on the Lenso D1R rims

from previous post few pages back I was going to go with

front 18x9+32

rear 18x9.5+30

however they no longer make the 9.5's

which means id have to go with a 10inch for the rear to get flush

I'm hoping they still make the 18x10+36 as outer position like Alex said will be the same from the outside

but being a 10inch rim will it fit with no other modifications, I currently have coilovers (only wound down about 2cm all round so cars not low low just a nice height atm

also for tyre choice I'm thinking of going with ku36 245/35/18 front and 265/35/18 rear (as they don't make the 255 in the ku36)

what do you guys rkn about the tyre size choice? and if anyone can give some advice on the 10Inch rear rim would be greatly appreciated

Thanks Jason -PS I am going to go back tomorrow to find out for sure they make it in the 10+36

or what kinda work will i be lookin at to get 9 +15 on the rear....keeping in mind i dont want to run camber

yeah 265 is fairly big, but if i were to go with the 18x10+36 id need that cos dont wanna stretch the tyre and ku36 dont come in 255 unfortunatly, alternativly i can get ku31 and run 255 which should be fine aswell on a 10" rim, just thought 245 be a bit to small...

if 9.5+30 is flush wouldnt that mean the 9+15 will stick out of guards 9mm?

yeh but with natural camber of been low or some camber arms you can pull it back in its not really that much like 9mm.

245 isnt that stretched on a 10 it fits quite well actually, a 235 is fair stretched or lower.

fair point, i got a bit of natural camber atm with my coilovers just been fitted but gettin adjustable camber arms to fix that, as a daily drive i dont want camber wear on the tyres...if it wasnt a daily i wouldnt care that much.

but true 9mm isnt allot but cos i aint gonna run camber to tuck it in rules out that size rim for the rear

lets just hope they make the 10+36 which is pretty much flush hopefully it wont hit anything behind the wheel for being too wide and just wrap it in 245s or 255s , because the wheel arc is goin to sit above the wheel so dont think rolling the guards or flareing should be an issue...or will it?

not to worry went back to the rim place cant get them sizes, looks like ill just go with the 9+32 all round which should only stick in 8mm which isnt that bad its pretty much almost flush

but thanks to everyone who helped me

go the 265's.

iv got 265's on my 18x9.5's and they are only just 'flush witht he rims'. So on a 10 inch rim they will me starting to go towards stretched, let along a 245 etc.

Im actually about to throw a 275 on as a replacement this weekend. Ill let you know how that goes on a 9.5..

thanks for the reply guys but the offset for a 10inch cant get to fit my car, so im getting

front 18x9+32

rear 18x9+32

i want to get kumho ku36 they come in 235, 245 and 265 they dont make the 255

what would my better option be 245 front and 265 rear?

go for some staggered fitment.

common staggered fitment is 8s n 9's or 8.5 n 9.5

iv got the latter with 235 n 275. Loves it and the handling is epic with a little lower, little stiffer (8kg-F, 6kg-R) little camber n adjustable damper. Put the power down real nice with 225kwatw...

Just about to buy set of new Lenso D1R rims for my 32GTR

I don't like stretched tyres on rims so looking for right size rims to sit flush with guards without any part of tyres or rims poking out so thought i'd ask you guys your opinions

I can get these 2 sizes which i think would be right for a 32GTR

18x9 +15

18x10 +22

Would the 10" rims fit both front and rear on these cars without poking out?

Now in saying this i don't like the look of stretched tyres either so i would need something around 265 or bigger right?

Don't mind running staggered fitment either as long as all fits under guards

Any help appreciated as want to get it right first time

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This piece is obscenely discontinued. I honestly hate the frameless window design because the rubber gets stressed and the guides as well every time you open and close the door.
    • I wouldn't be concerned at all, other than to suggest having them flow tested when you receive them to confirm they are reasonably similar, and then put the highest to lowest flowing ones in cylinder 6,1,5,2,4,3
    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
×
×
  • Create New...