Jump to content
SAU Community

Recommended Posts

Can anyone confirm if 18x9.5+32 front and 18x10.5+38 rear wheels will fit an 1996 r33 gtst without any modifications, are these the widest you can go before you have to flare guards? if so how much wider can you go..

maybe wheel spacers?

cheers

Can anyone confirm if 18x9.5+32 front and 18x10.5+38 rear wheels will fit an 1996 r33 gtst without any modifications, are these the widest you can go before you have to flare guards? if so how much wider can you go..

maybe wheel spacers?

cheers

That should be a completely safe fitment. Should sit inside the guards (for legality issuess) and shouldn't have any scrub issues, especially staying stock height. Run 235/40 fronts and 255/40 rears just to be sure. Make sure you post pics when you are done :)

Edited by voncina

That should be a completely safe fitment. Should sit inside the guards (for legality issuess) and shouldn't have any scrub issues, especially staying stock height. Run 235/40 fronts and 255/40 rears just to be sure. Make sure you post pics when you are done :)

hells no.

That will hit the rear guard lip and rub the front guards without doubt. Would need lots of camber and guard rolling to fit.

Will not be legal.

you are both wrong... lol

if you want low you will need to pull the guards a little for those sizes... but not much

and you wont need epic camber.

reference the pics at the top of this page

yeah i was looking at the 33 at the top, but i want to go for the out of the guard look, what will it be involved in doing that and fitting the new pair of ssr i just bought 18x9.5+32 and 18x10.5+38

hells no.

That will hit the rear guard lip and rub the front guards without doubt. Would need lots of camber and guard rolling to fit.

Will not be legal.

I am going to debate this..

If his car has no modifications then the stock height plus the small amount of stretch he will be putting on the tyres will miss the rear guard lip. I have 10.5+30 on the rear and if I raised my car I wouldn't need guard rolling at all. The only reason this fitment is illegal is because he will be running two different sized rims.

If his car has no modifications then the stock height plus the small amount of stretch he will be putting on the tyres will miss the rear guard lip. I have 10.5+30 on the rear and if I raised my car I wouldn't need guard rolling at all.

by that token if you raised your car it would stick out a bit too... remember they tuck in when lowererd

The only reason this fitment is illegal is because he will be running two different sized rims.

and becasue they are 18's

and because they are 10.5's

and becasue of the track increase

lol

who cares if it's legal... legal rims always look shitty

i figured some people just say it fits but they wouldnt do that to their cars. If it possible people should try test fitting and seeing if its possible or trust those with pics otherwise man you could serioslu get some bad offsets which you cant return.

17 x 8 + 5 front 205 tyre

17 x 10 + 5 rear 235 tyre

For show.

yes it gts

IMG_6617_zps6ad353a8.jpg

18 x 8.5 +30 225 tyre

18 x 9.5 +34 265 tyre

for go on road

fffd25fe_zps75e43f2a.jpg

17 x 9 +30 with 235 front and 255 rear for race but no pic

Edited by PaulosECR33

r33 s2 to fill the guards evenly do you go same size wheels all round. Or how much wider on the rear hypothetically if running similar camber.

planning to go 18 x 9 +21 front and 18 x 10 either +33 or +26 rear. Would prefer to go a little lower in offset but next up is 18 x 9 +9 which i think will be a reasonable effort to make fit and not scrub (ride height approx 335mm eyebrow)

Cheers

Edited by Pattey21

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...