Wheel Sizes & Offsets For Skylines

[joeyjoejoejuniorshabadoo]

lol you wont notice them missing dude

[boiracer]

they can however it's better to remove them as the bolts that hold them in are pretty good as catching tyres if the car is low

also clearace is an issue... my tyres would hit the metal above on occasion so liners would have been destroyed anyway...

also it's a good idea to jimmy up something to hold the cables out of the way in the right front arch

this is true, Mine rubs the bolts occasionally coming in and out of driveways.

[joeyjoejoejuniorshabadoo]

and if they hit on driveways that means they can catch during hard driving....

[boiracer]

My thoughts too, but apparently not. While hard driving the lock seldom goes as far as while entering driveways. and the camber change is never that much on a road or track as it is coming up driveways.

[joeyjoejoejuniorshabadoo]

Yeah, I get what you are saying, and you are correct for 99% of cases, however roads aren't always flat..

my opinion is that it's worth it for that 1%

[ZRBE]

Hey guys, Just had a quick read through this thread but couldn't really find anything about wheels for an r32 GTS-T coupe type M

- The guards aren't rolled or anything to my knowledge..

- I know nothing about offset/width and all that

I'm seeking advice on a nice sized wheel. I want 17" or might go 18"

The wheels on the car are ArchWheels.. So seedy they look like a spider web (bought with them on the car)

I have no idea what size they are, pretty sure they're 17's but the car is 110km away at my grandparents ready for a little makeover

So if you could give me some nice sizes with the specs etc.

Cheers Zane.

[ZRBE]

Double post.

Edited July 1, 2013 by Zrobe

[D.I.Y. Mik]

Anyone know the backspacing for standard r32 gtst wheels?

It looks like about 4 1/2 inches but im not sure.

Im liking these http://www.summitracing.com/parts/crr-3978912/overview/

But im looking at how very close the hicas knuckle is.

I know they are steel, but the only other ones i really like are about $4000 (gold fabulous racing)

[B-rice]

Anyone know if a 275 tyre would have a bludge or straight side wall with 9.5 inch rims. Any pics would be appreaciated

[ripitup]

I am in the market for new rims for my r33 gts4 and have narrowed the selection down to two designs, work vs-xx or meister s1

in either 18x9 +15 or 18x9.5 +20, both sizes and offsets should fit ok but I'm not 100% sure.

[sqr47]

Anyone have any experience with the follow size wheels on a R34 GTT?

F - 18*9+22 running 245//35//18 rubber

R - 18*10+30 with 265//35//18 rubber

I am looking at getting some wheels for my GTT, currently running stock suspensions (planning on lowering after I find the right wheels.)

I'm hoping for the wheels to sit as flush as possible with the guards. Would also like to avoid stretching rubber.

I'm prepared to roll guards when I lower the car, but I'm wondering if any further work would be required??

Cheers!

[TM7GTR]

fuark some of you guys need to read a few pages back instead of posting the same goddamn questions

[34GeeTeeTee]

Anyone know if a 275 tyre would have a bludge or straight side wall with 9.5 inch rims. Any pics would be appreaciated

They sit straight on the rims! Look in my build thread somewhere and you will find a pic! Too lazy to go find it for you!

[alr33x]

I am in the market for new rims for my r33 gts4 and have narrowed the selection down to two designs, work vs-xx or meister s1

in either 18x9 +15 or 18x9.5 +20, both sizes and offsets should fit ok but I'm not 100% sure.

easy.

[Frosty]

Thoughts on this size?

Rota Grids (concave version)

18x10 +35 offset

with 235-40-R18 and 245-40-R18 tyres

With the old tape measure there will be a bit of poke on the front, but im more concerned with what it might

touch under the arches!?!

http://www.willtheyfit.com/index.php?width=215&aspect=55&diameter=16&wheelwidth=6.5&offset=40&width2=235&aspect2=40&diameter2=18&wheelwidth2=10&offset2=35&Submit=Submit

^with the 235 tyres for the front

Cheers guys!

18x10 +38 on the rear will be fine. Go 18x9 +30 on the front

[Frosty]

They sit straight on the rims! Look in my build thread somewhere and you will find a pic! Too lazy to go find it for you!

only girls run 275's ya pussy

[boiracer]

only girls run 275's ya pussy

Lol, explain how?

[sleptema]

Anyone have any experience with the follow size wheels on a R34 GTT?

F - 18*9+22 running 245//35//18 rubber

R - 18*10+30 with 265//35//18 rubber

I am looking at getting some wheels for my GTT, currently running stock suspensions (planning on lowering after I find the right wheels.)

I'm hoping for the wheels to sit as flush as possible with the guards. Would also like to avoid stretching rubber.

I'm prepared to roll guards when I lower the car, but I'm wondering if any further work would be required??

Cheers!

You need to look back a few pages, try to find my post and pictures.

Short answer: Perfect. Get coilovers and slam it. I would change rubber to 225/45 and 245/45 personally for more low.

[34GeeTeeTee]

only girls run 275's ya pussy

Lolz

[Manuel Kasko]

only girls run 275's ya pussy

You have a way with words my love