Jump to content
SAU Community

Recommended Posts

Hey guys great thread. I have had a look but would like some recoomendations as to what numbers to use on my R33 GTS-t. This car will be used predominantly on the track and I prefer 17" wheels (thinking of Rota grid, or P45R or something similar). Im also thinking of going with a staggered set up (9-9.5 rear and 8-8.5 front). I want to run some nice wide tyres also. Questions is, what do those who do track days recommend from their experience?

Cheers

Amir

Hey just want a quick answer. Going to buy a set of Lenso D1R's for my daily R33. Would 18x9 +32 (Front) sit flush in the guards

18×10 +22 (Rear) sit flush in the guards

Or what issues am I gonna get

Just like to hear some feedback to help me out.

Edited by WLD MAN

Assuming Gtst. Fronts will sit inside about 10mm, and rears outside about 15mm. This depends heavily on camber though. I have 18x10+38 which after resetting camber to 0 now sit flush, maybe the tiniest bit of poke, whereas previously looked like they had heaps of room.

12mm wider rim, so 6mm either side. But 8mm larger offset, so will sit in 2mm more than 18x9+32.

You'll also have clearance problems on inside with offset larger than around +25 with 9.5" wide rim.

Best if you learn how to calculate offset, or use a calculator on the net.

My recommendation would be to use 18x9.5+22 with 235s and roll guards to fit. Not too difficult or expensive and proven to be a good combination for 33 gtst.

Hey guys great thread. I have had a look but would like some recoomendations as to what numbers to use on my R33 GTS-t. This car will be used predominantly on the track and I prefer 17" wheels (thinking of Rota grid, or P45R or something similar). Im also thinking of going with a staggered set up (9-9.5 rear and 8-8.5 front). I want to run some nice wide tyres also. Questions is, what do those who do track days recommend from their experience?

Cheers

Amir

I went for a staggered set of track rims last year (17x8.5 +30 front and 17x9.5 +38 rear) but changed to a square setup this year (17x9 +35 with 255/40 tyres) for the increased frontend grip and being able to rotate the wheels around the car as they wear.

I went for a staggered set of track rims last year (17x8.5 +30 front and 17x9.5 +38 rear) but changed to a square setup this year (17x9 +35 with 255/40 tyres) for the increased frontend grip and being able to rotate the wheels around the car as they wear.

Similar to what i have done, just with 18's :)

  • Like 1

What's a good offset for Rota Grid Rs in 18x9.5 all round on a 33 gtst? Thinking +35 all round. Will only go as far as rolling my guards.

Cheers

I think heaps of people run +22 all around with little tyre. Might want to check front clearance before you go putting money down.

I went for a staggered set of track rims last year (17x8.5 +30 front and 17x9.5 +38 rear) but changed to a square setup this year (17x9 +35 with 255/40 tyres) for the increased frontend grip and being able to rotate the wheels around the car as they wear.

Did you notice any oversteer with the square setup?

Cheers

Amir

I think heaps of people run +22 all around with little tyre. Might want to check front clearance before you go putting money down.

Agreed, you'll definitely run into inner clearance issues with +35.

Honestly, if you're willing to roll guards just get +22 with 235/40/18s and be happy. I didn't get 9.5 +22 and sometimes wish I did.

Im thinking of getting 17x9 +25 for my r33. The guys at Rota recommended this and said the widest tire I can run would be a 255. They also said I will have better clearance with +25 than with +35.

Does this sound right to you guys?

Cheers

Amir

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...