Jump to content
SAU Community

Recommended Posts

Looking at getting wolf s1p will 18x10 + 35 fit rear? Otherwise this

Skyline model = r33 gtst

Wheel diameter = 18

Wheel width = 9

Wheel offset = +27

Tyre size = 235 40

Modifications to fit = ????

10+35 SHOULD fit rear, I had 10.5+30 and it fit no issues.

Other than that, the 9+27 would be near on perfect.

Looking for some ideas on what size tyre I should run on my new wheels? These are on a 33 gtst.

Current specs are: Front: 18x8.5+35 235/40 Rear: 18x9+35 265/35.

With my mildly rolled guards they fit easily 15-20mm inside the guards and I can fit my almost my whole hand in and around them in the guard and get pretty much no scrub at full lock or anything but I'm not sure if I kept the same tyre sizes it would clear everything easily and not scrub like all shit. My new wheels are 18x9+20 all round so a fair bit more agressive offset but nothing crazy. I don't want much stretch and would like the largest and most practical tyre sizes I can fit without more guard work. Any help is much appreciated! cheers.

18x9+20 with 245/40 all round :)

Rolled guards, front upper control arms to help tuck it in. Bit of scrubbing otherwise

post-109116-14188220710166_thumb.jpg

Edited by dontyellpl0x
  • Like 2
  • 2 weeks later...

My R33 GTR on Work emotion D9r ... got them back in October on the 12th, just been lazy and havent up loaded anything.

Work Emotion D9R 18x10.5 +15

Federal RSR Semi slicks 265/35/r18

Hnngg.

Edited by sleptema
  • Like 1

Hey guys I'm looking at buying a set of enkei RPF01's for my r32 gtst, I'm just wondering wether 18x9.5 +15 fronts and 18x10.5 +15 rears would fit

Not a chance without work. Well, they'll fit... drivability is probably not great...

My 18x9.5 RPF1's all round on the BNR32 barely fit as width goes.

I can't remember if the GTST fronts are same but you'll need to run 245's if you want to not rub the guard liner.

You'd have 1inch sticking out at the rears with 10.5's, not even camber alone with get that back..

Lol this guy ^

What look do you want and how much work ate you prepared to do?

If you run 225 and 245 you will easily make it with camber and a big guard roll.

If you are going for something that will still grip then expect to pull guards a fair amount

Guard liners won't be an issue as they will have to be removed anyway

Hey can you guys help me out I have a 33 gtst and I'm looking to go different wheels, just wondering if I can 18" 8.5 +30 on the front and 18" 9.5 +38 on the back? Or should I just go same width front and rear, if so should I go 8.5 or 9.5 all round???

Hey can you guys help me out I have a 33 gtst and I'm looking to go different wheels, just wondering if I can 18" 8.5 +30 on the front and 18" 9.5 +38 on the back? Or should I just go same width front and rear, if so should I go 8.5 or 9.5 all round???

That's exactly what my old wheels were and it fit fine. 9.5+38 265/35 on the rear and a 8.5+30 235/40 on the front.

post-109116-1419911417604_thumb.jpg

Edited by dontyellpl0x
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • But, do I have to? 😬
    • While doing my tailgate struts I found some rust. Also replaced my bonnet struts. Such a cool satisfaction with that job.
    • So I removed as much as I could from both sides. The shop vac did a great job of clearing 99% of it. I got it all as clean as I could and then absolutely drenched the whole lot in the rust converter. Tonight or tomorrow I'll hammer it again. The cavity must be close to 400mm in length and surprisingly I was able to get it right to the back.  I'll quickly reassemble and then pretend I never saw it. I'll post pics (for me to ignore later) soon.
    • Yea she is a hoot to drive 
    • I have always resisted the urge to go silly. 8" wide wheels and street friendly spring rates? Check. (Let's not talk about the steadily increasing spread of spherical joints across my suspension!!) Stock turbo, run at 12 psi? Check. Lasted for~?10 years before it died. Highflow put on rather than seizing the opportunity to go G45. You don't need 300 rwkW, let alone the more massive numbers that seem to be essential these days, to have a car that is already way too powerful and fast for a streeter. ~250rwkW is fine. I've never exceeded 200, although I will sneak up above it if and when I manage to get my finger out and do what needs to be done to use the highflow's capacity. You don't need $10k worth of CF bits glued onto the outside. You don't need razor sharp ankle cutting front splitters. You don't need the car to be 2" off the ground. You don't need flawless paint, mirror finished wheels, brand new indicator lenses, etc etc. All these things just make the car impractical and will cause you pain when they get damaged, which is inevitable for a street car. A few nice additions are good. Good seats are good. A nice stereo is good. A/C is good! (46° on the road yesterday and my A/C is degassed again. Was moderately traumatic driving home!) The main reason I stick with a mildly modified old Skyline is that I have had it for >25 years, the mods are the rolling result of 25 years of things dying and being upgraded opportunistically, coupled with a few "just 'coz" ones. And I hate almost all modern cars. If I was a young buck starting out now.... I wouldn't bother. Cars have a few years left where there is any possibility of interest or fun. Thereafter there will be no such thing allowed or possible. Any time, money and effort spent now on a project would just be a waste.
×
×
  • Create New...