Jump to content
SAU Community

Wheel Sizes & Offsets For Skylines


Recommended Posts

I think heaps of people run +22 all around with little tyre. Might want to check front clearance before you go putting money down.

Can't seem to find +22 on their website?? Only have +38, +35 and +18

Link to comment
Share on other sites

Can't seem to find +22 on their website?? Only have +38, +35 and +18

Bugger. How much tyre/camber/low are you planning on running?

+18 would easily fit the rear but im not sure what needs to be done to fit the front. Probably bit of camber and little tyre?

edit: Seems someone has answered you on facebook. I think he is right, probably better off going a staggered setup.

Edited by dontyellpl0x
Link to comment
Share on other sites

Yea got an answer for fitment on the rears, only problem is the only width Rota offers is 9.5 or 10's so can't go staggered fitment unless I get the normal Rota Grids but then I won't have the concave look the R's offer on the front.

Not planning on running any lower than it sits nowpost-34692-14078506335871_thumb.jpg

Link to comment
Share on other sites

just run 9.5+18 all round

staggering is pointless and the front guards have heaps of room

will need to roll all 4 corners and remove the guard liners in the front.

front guards can literally be pulled to any spot they need to be and then moved back... just be sure to check front door and bonet clearance at the joins.

  • Like 2
Link to comment
Share on other sites

Hi all , new to the forum thought id start somewhere ,just got a new set of wheels and tyres fitted and had an issue or two

Skyline model = R33 GTST S2
Wheel diameter = 19"
Wheel width = 8.5 , 9.5
Wheel offset = +25 Rear, not sure of front they but sit inside guards
Tyre size = 235x35 , 245x35
Modifications to fit = roll rear lips ,car at standard height atm fitting coilovers soon , rears look like they might need camber fix to lower it, fronts will need inners removed to lower. Rolling cost $70 a side ,nice job too no cracked paint yet :yucky: ...will post photos when i work out how to do it ..

Link to comment
Share on other sites

with that offset and those tyres you should be fine (ultimately depending on how much you lower it though).

Otherwise the rears will naturally get more camber as you lower it so it will fix itself anyway.

Link to comment
Share on other sites

TE37: 18x9 +20 all round, 245x40's on the front and 275x40's on the rear.

What issues/modifications will I encounter?

Car is HNR32 (GTS4 sedan).

I think you may have some clearance problems with the rear tires being that wide but I'm not 100% sure (may have to roll guards). Can anyone confirm?

Im guessing this is a track car given the wide tires?

Cheers

Link to comment
Share on other sites

Skyline model = r34 GTT

Wheel diameter = 18"

Wheel width =10"

Wheel offset = + 15

Tyre size = ?

Modifications to fit = ?

Will these rims be legal in WA as well ? I know with diameter you can go 2" higher or lower but what are the limits to width? Any help would be greatly appreciated :)

Link to comment
Share on other sites

Skyline model = s2 r33
Wheel diameter = 17"
Wheel width =9"
Wheel offset = + 22 (or 25 cant remeber)
Tyre size = 235/40
Modifications to fit = none

Plenty of caliper clearance, no problems when turning. Will upload photo soon

Amir

Link to comment
Share on other sites

Skyline model = r34 GTT

Wheel diameter = 18"

Wheel width =10"

Wheel offset = + 15

Tyre size = ?

Modifications to fit = ?

Will these rims be legal in WA as well ? I know with diameter you can go 2" higher or lower but what are the limits to width? Any help would be greatly appreciated :)

no they wont be legal. 2 reasons

1st is they wont sit inside the guards.

2nd is that yes there is a limit to how much wider you can go from stock rim width and im sure a 10" rim is it. I remember checking one time if my 9.5 inch rims would be too wide and indeed they were. I think it is 1 inch wider or something boring like that. However you are unlikely to get any greif from this too much, the wheel outside the guard will be the one that gets you (as well as the high camber and stretched tyres to make it fit)

GL

Link to comment
Share on other sites

I'm looking at getting some rims for my r33 gtst.

17x9+35

17x10+25

I'm not sure if they'll fit. Cars lowerd on tien coilovers. If they fit what tire sizes are people running with these sizes. It's a daily driver any info would be appreciated.

Link to comment
Share on other sites

Skyline model = r34 GTT

Wheel diameter = 18"

Wheel width =10"

Wheel offset = + 15

Tyre size = ?

Modifications to fit = ?

Will these rims be legal in WA as well ? I know with diameter you can go 2" higher or lower but what are the limits to width? Any help would be greatly appreciated :)

Lol no

Link to comment
Share on other sites

Skyline model = r33 gtst

Wheel diameter = 17

Wheel width =9 inch front 10 inch rear

Wheel offset = f +35 r +25

Tyre size = ?

Modifications to fit = ?

front will be fine with a 245 or something and maybe pushing the guards back a bit.

rears will be a bit of fun. its going to sit outside the guards so you will need to roll the rear arches, put camber on it and probably also run a 245.

I hope that is the look you are going for...

  • Like 1
Link to comment
Share on other sites

Skyline model = r34 GTT
Wheel diameter = 18
Wheel width =9.5
Wheel offset =+20
Tyre size = 225/40 fronts, 245/45 rears
Modifications to fit = Guard roll all round, rears will be dropped down to 245/40 and camber arms installed

They are poking about 10mm fronts, less on rears as they are cambered in with natural lowering. Will get an alignment done and report back.

post-80854-0-86713300-1409679830_thumb.jpgpost-80854-0-88391800-1409679854_thumb.jpgpost-80854-0-53818600-1409679866_thumb.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So.... when I'm finally getting around to having my power steering leak sorted, now it looks like I've got the same issue most A/T Skylines are having. My A/T light will randomly come on and I'm stuck in 3rd gear until I turn the car off and on again. Only 3 weeks ago I did a complete transmission service: Oil flush + new gasket + new filter. This came out of nowhere!! It wasn't like the car was driven hard. I drove about 3 mins down the road to get fuel and boom!!!  Anyway, I have a few questions and hope you fine people can help me out here. All questions are in red. 1. The solenoids: I was looking at the parts catalogue in Amayama and I could only find the Solenoids as an assembly. https://www.amayama.com/en/part/nissan/319404ax05 I read in another thread that Solenoid A = 31940-4AX02 & Solenoid B = 31940-4AX05 but the Amayama product has only the code of B. Is this the right part? Can anyone who has done the Solenoid changes or seen them confirm if this is the complete set of A & B?   2. Gasket and Filter: I'm not going to try change the solenoids myself because it seems difficult to do in a home garage with just 2 jack stands. I plan to take it to a shop and get it changed. I was also going to buy the transmission sump gasket at the same time so I don't reuse the same gasket. Should I just use the existing gasket as it has only been on the car since OCT 19th? (~3 weeks) Should I be buying a brand-new gasket and a filter? Does this job involve taking the filter out?   Thanks in advance to everyone. It's hard to find a video of someone doing a solenoid change on a R34 so any help you can give answering my remaining questions would make me less stressed.
    • Yea - From what I have seen from the video, the car idles like any R34 lol 50PSI of fuel pressure is hardly super abnormal, the regulator is working because the pressure remains static when the throttle gets revved, i.e pressure remains the same when manifold vaccuum changes. Bigger pumps on stock rails always bumped the pressure in the rail without using an aftermarket regulator to change that. Do you know what your IAC is actually doing? Has there been any data showing the stepper motor % etc? There's no way your idle is actually moving around the way the cluster(s) are indicating. You would hear the difference with the engine RPM flying to 3k and 1k in mere seconds. I'd be checking the wiring to the tacho. What the tacho is telling you and what the engine/ecu is telling you are different things. I assume your ECU doesn't display the spike. So whatever is telling the tacho to be at X rpm is doing something weird. When the going gets insane, you're on the wrong path. You've ruled out plenty of things that are working correctly/aren't the issue. Your idle isn't doing what the tacho is indicating. You have two seperate issues, I don't think they are linked, and the idle seems reasonably okay unless it's stalling which.. well, it hasn't. Troubleshoot the stall if it occurs by figuring out what your IAC is doing vs what it is being told to do.
    • So awesome! I love the RB with the exhaust on display.
    • NO HITS PRICE DROP   ENGINE - $8.5k ONO TRANSMISSION - $1.8k ONO  
    • If it has had a code in the recent past, the code should still be there waiting to be read.
×
×
  • Create New...