Jump to content
SAU Community

Recommended Posts

soooo was just wanderin through the loungeroom and noticed some bs about new p plater laws that are being proposed for victorian p platers, pretty much the same as the nsw ones, green for first yrs, red for 2nd and 3rd yrs, and somehow this magically reduces road tolls...... riiiiggghhhttttt

Link to comment
https://www.sau.com.au/forums/topic/84253-new-p-plater-laws/
Share on other sites

also not allowed to use handsfree mobiles.

Damn stupid idea. It's already unlawful to use hand-held, but it doesn't stop people using them while driving. What makes these bureaucrats think extending the rule will make the slightest difference. (being disqualified from driving doesn't stop some people from still hopping behind the wheel)
steve bracks is the biggest moron i'd say.... also that minister for transport mr. sumthing Batchelor. thoes guys are purly stupid, i think it has somthing to do with the color green being a passive color that would reduce the road toll :(

:lol:

i'd love to be in the office when they brainstorm these ideas..... ok so we wanna reduce the road toll with young drivers, so we wont put money into driver training or anything like that, O0O0O got it, LETS CHANGE THE COLOR OF THE P PLATES, THAT'LL TOTALLY WORK... stupid government.

:lol:

i'd love to be in the office when they brainstorm these ideas..... ok so we wanna reduce the road toll with young drivers, so we wont put money into driver training or anything like that, O0O0O got it, LETS CHANGE THE COLOR OF THE P PLATES, THAT'LL TOTALLY WORK... stupid government.

No shit ! They all these money from giving out fines left right and centre....but still no real solution has been found... f*kin pathetic...

actually its not a bad idea, p platers in there first year can of had very little road experience, vs a p-plater who's had there license for several years. i think its a good idea to identify 1st year p-platers

You can identify dangerous/ inexperienced drivers till the cows come home, won't make them safer or lower the road toll, just mix the colour up when they show the wrecks on the news.

I think driver training is the only real solution, and they don't seem to give a stuff about even considering it.

Change their attitude, not the colour of a little plate that half of them don't even display

You can identify dangerous/ inexperienced drivers till the cows come home, won't make them safer or lower the road toll, just mix the colour up when they show the wrecks on the news.

I think driver training is the only real solution, and they don't seem to give a stuff about even considering it.

Change their attitude, not the colour of a little plate that half of them don't even display

agreed 100%

at the moment, it's just a proposal

http://www.arrivealive.vic.gov.au/forms/ydsafety_1_form.php

(follow link under 'additional information' to young driver discussion paper)

check out the above link for more info. As mentioned, it's asking for public comment, so if you oppose these changes either use the online form on the above website. Or write to

Discussion Paper – Young Driver Safety

VicRoads

Reply Paid 61943

KEW VIC 3101

I would think that most people on this forum might object to one of the suggested guidelines

"Review high-powered vehicle provisions"

Now is you chance to have a say on the issue, and I'd encourage everyeone to fill out the forum. P-platers are outnumbered by the rest of the car-driving community so it's important that as many people respond to this issue as possible.

Wish they spent as much time getting old people off the road as they do P platers.. never had a p plater run into me but had a few trucks & old people almost kill me & mine :\

I just had my 2cents....well, it was more like a dollar...

here's what i had to say

: I think the proposed laws are a scapegoat. Changing the color of the plates that we as p-platers display WILL NOT reduce the road toll. Identifying first year and in-experienced drivers does nothing to reduce the road toll, it simply changes the color of that drivers plate. The only way to reduce the road toll, is to provide adequate driver training. The current system, is a joke. It all starts with the Learners permit. To gain this permit, it is not a requirement that you have ever operated a motor vehicle, but that you are able to read a book, and remember some road rules. In addition, there is no way to determine if an L plater is ready to move on to their P\'s...but in the current system, the only requirement is that you have had your L\'s for a certain amount of time (doesn\'t mean you\'ve driven much), and that you are 18 years old. Getting your P\'s is no more difficult in reality. When you attend driving lessons with an instructor, you are taught how to pass the test, not how to drive. Put simply, that is the problem. What is required is a change in the licensing system. Being able to read (or hear for that matter) and remember some laws, should not be all that is needed to put someone on the road. What is required is that drivers receive adequate training. Taking a few lessons and learning how to drive at speeds that hold up traffic, and how to parralel park, is not adequate at all. It doesn\'t even come close. Until there is a change in what is required to obtain a license, the road toll will not be reduced by any great amount. Banning P platers from driving \"High performance cars\" may save the odd life here or there, but it is not what is to blame for the high road toll among P platers. If we are banned from driving these \"high performance vehicles\" we will once again move on to the next level (full license) with no experience, yet will be aloud to buy the most powerful car we can afford. Change the licensing system so that we are taught to drive, how to operate a vehicle properly, and safely. Teach people how to react in the event of an emergency, not just how to park a car on a quiet street. Until driver training is reviewed, and changes are implemented in the licensing system, there will be no decline in the road toll. Banning \"performance cars\" is not the answer, as an idiot who can\'t drive will kill his or herself in any car, and possibly take others down with them.

Wow, that is long, i wonder if it will even be read. lol

ah well, its better than saying "let me drive my 300rwkw car because i get more roots in it"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • careful when running the car after a boil over. Ive heard you can lose enough coolant that it won't show the right temps because of too much air in the system (or something like that). Make sure the levels are good before trying again.  Maybe a mobile mechanic can come have a look with their scan tool ?
    • OK, just for some extra clarity - there is more than one option at Frenchy's. 1. You can buy the whole kit - with or without the actual compressor. The whole kit includes mounts, hoses, condensor, etc. That's either ~$2200 or ~$2800. No surgery required with this option. 2. You can buy just the bracket (~$600), or the bracket with the compressor (~$1200). Either of this or the above option "without the compressor" is if you already have an Echo comp or you are able to source one locally. Whatever the case, in this option, you will need surgery done on your hoses to adapt to the new compressor. When I said "the Frenchy's kit", I meant the whole kit in option 1. It is obviously somewhat more $$ than a $1500 OEM compressor. But if I had to spend $1500 on an OEM compressor, I would certainly consider spending double that to renew and significantly update everything forward of the firewall. Another option is to rebuild your original compressor. My R34 comp is currently dead and I will be most likely doing that to it if the spare one in the shed is also leaky.
    • I’m thinking that’s the route I’ll  go, thanks for the input!
    • Hey all, my 2004 Nissan Skyline 350GT overheated the other day with coolant boiling and leaking out of the coolant reservoir when I was parking. So today, I started it up again just to see if it was a thermostat/head gasket issue. After about 20 mins of running, temps were normal again, no coolant was leaking out and the upper reservoir hose was warm but my engine suddenly cut off. I checked the oil dipstick and cap when it was running and there was no white foamy residue and the exhaust did not have white smoke. I tried starting up the car again but it would only crank, similar to when I had a camshaft sensor issue just that now there’s no check engine light on the dash. Any ideas? Unfortunately I don’t have an OBD2 that can read the Nissan's programme.
    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
×
×
  • Create New...