Jump to content
SAU Community

And Remember Kids........


Recommended Posts

THINK! Where does the enemy get his information -- information that can put you, and has put your comrades, adrift on an open sea: information that has lost battles and can lose more, unless you personally, vigilantly, perform your duty in SAFEGUARDING MILITARY INFORMATION?

THERE ARE TEN PROHIBITED SUBJECTS

1. Don't write military information of Army units -- their location, strength,, materiel, or equipment.

2. Don't write of military installations.

3. Don't write of transportation facilities.

4. Don't write of convoys, their routes, ports (including ports of embarkation and disembarkation), time en route, naval protection, or war incidents occurring en route.

5. Don't disclose movements of ships, naval or merchant, troops, or aircraft.

6. Don't mention plans and forecasts or orders for future operations, whether known or just your guess.

7. Don't write about the effect of enemy operations.

8. Don't tell of any casualty until released by proper authority (The Adjutant General) and then only by using the full name of the casualty.

9. Don't attempt to formulate or use a code system, cipher, or shorthand, or any other means to conceal the true meaning of your letter. Violations of this regulation will result in severe punishment.

10. Don't give your location in any way except as authorized by proper authority. Be sure nothing you write about discloses a more specific location than the one authorized.

TALK

SILENCE MEANS SECURITY -- If violation of protective measures is serious within written communications it is disastrous in conversations. Protect your conversation as you do your letters, and be even more careful. A harmful letter can be nullified by censorship; loose talk is direct delivery to the enemy.

If you come home during war your lips must remain sealed and your written hand must be guided by self-imposed censorship. This takes guts. Have you got them or do you want your buddies and your country to pay the price for your showing off. You've faced the battle front; its little enough to ask you to face this 'home front.'

CAPTURE

Most enemy intelligence comes from prisoners. If captured, you are required to give only three facts: YOUR NAME, YOUR GRADE, YOUR ARMY SERIAL NUMBER. Don't talk, don't try to fake stories and use every effort to destroy all papers. When you are going into an area where capture is possible, carry only essential papers and plan to destroy them prior to capture if possible. Do not carry personal letters on your person; they tell much about you, and the envelope has on it your unit and organization.

BE SENSIBLE; USE YOUR HEAD

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
×
×
  • Create New...