Jump to content
SAU Community

Recommended Posts

For those that have R32 GTRs what is the maintainence like on them? I would really like to get one, but the age of them worries me.

I am guessing that engine wise the biggest problem is likley to be the turbos... But a few thoughts from those that currently have one would be really helpfull.

Link to comment
https://www.sau.com.au/forums/topic/84633-r32-gtr-issues/
Share on other sites

For those that have R32 GTRs what is the maintainence like on them?  I would really like to get one, but the age of them worries me. 

I am guessing that engine wise the biggest problem is likley to be the turbos...  But a few thoughts from those that currently have one would be really helpfull.

I dont have one (gtst 33) but from what i have read on here is that only really have to look out for is the oil pump shitting its self and you spinn a big end

Link to comment
https://www.sau.com.au/forums/topic/84633-r32-gtr-issues/#findComment-1532080
Share on other sites

I've had mine since September last year.... the previous owner had the engine rebuilt with forgies(gotta get it rebuilt and done properly myself anyway), turbos hi-flowed, replaced the oil pump, and added a baffle oil sump....so..... since I've had it I've had to replace to the coil packs and get my alternator reconditioned.

Apart from the coil packs and alternator she's been sweet...

Link to comment
https://www.sau.com.au/forums/topic/84633-r32-gtr-issues/#findComment-1532439
Share on other sites

it's almost impossible to answer that because it depends so much on the condition of the car. get a bad one and it will make you pay until you squeal, get a good one and it will cost you normal servicing only. but it's just like buying a porsche - maintaining something that will give you this much performance is never going to be cheap eg yes you can use $15 oil from Woolies but most of us use full synth $60 or so every 5000km. it adds up.

Link to comment
https://www.sau.com.au/forums/topic/84633-r32-gtr-issues/#findComment-1535742
Share on other sites

i'm just waiting for nick to pipe up. :)

he told me not to buy a gtr. did anyway. i resent the PITA that they can be but the experiences you'll have in it FAR FAR FAR outweigh any $$$ outlay you might experience.

having said that, i got lucky with mine. its an 89 and i've had very few problems with it. anything that has reared its ugly head has been quite minor.

keep in mind that even the best 32's will most likely need some sort of work before too long. its the kind of car you really need to be dedicated to, otherwise you'll just end up with a car that is falling to pieces! preventative maintainance is the key to these cars.

if i could go back before i bought my gtr with the knowledge of the things that i have gleaned during my ownership, i'd spend more on the initial purchase and buy one that was in a higher state of tune. that is all. other than that, its been a great purchase!

so yeah, if the pockets allow, nab yourself one and enjoy what is, really REALLY, one of the best cars in the world and one of the most rewarding drives you'll experience.

oh. and my car's for sale too if you want it!!! ;) going o/s end of the year, and downgrading until my return. then i'll park another R in my driveway.

http://www.skylinesaustralia.com/forums/in...showtopic=84594

d

Edited by djhatton
Link to comment
https://www.sau.com.au/forums/topic/84633-r32-gtr-issues/#findComment-1548744
Share on other sites

ive only really had diff troubles with mine. The day after it got licenced the diff dropped a bearing and grinded and grinded. Replaced it with a 2nd hand unit which looked good and the lsd is worn in it so again i need to either fix it or look for an aftermarket unit.

Umm what else.. my air con has decided to only point to the window, motor wont move the vents.

Brakes are very spongy, replaced master cylinder and it didnt fix it so its either worn/old brake lines or the brake booster.

i think thats it :|

Link to comment
https://www.sau.com.au/forums/topic/84633-r32-gtr-issues/#findComment-1549539
Share on other sites

  • 2 weeks later...

oil's (motor, gearbox, diff' (s), auto trans) air filter, fluids (brake, coolant, clutch master) sparkies, coils (not that you can do anything except glue them dont ask) wheel bearings all of this you can do your self

Link to comment
https://www.sau.com.au/forums/topic/84633-r32-gtr-issues/#findComment-1570363
Share on other sites

Hey djhatton it's Pat here from Duratone :)...

Yeh I pretty much have the same questions but replace GT-R with GTS-T....can't afford too much in maintenance.

haha hi mate

so you're in the market for a gtst. good choice.

gtst's are much simpler beasts (i used to own one) and you shouldn't have too many problems really. just the usual sh1t. of course, its all relative and the driving experience of a gtst is hugely different to an r.

no doubt you'll find every problem you're likely to come across EVER posted among these very forum pages so have a snoop around. search is your friend. i was a member on here for like 8 months before i posted. i spent that time reading and reading and reading the backlog that exists. lots of info here.

i'm not surprised you can't afford the maintainance of a gtr on what fay pays! teehee....

d

Link to comment
https://www.sau.com.au/forums/topic/84633-r32-gtr-issues/#findComment-1571900
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah i agree paint match stops it from standing out so much, oh that's actually really good to know i was wondering if it would help with air flow now actually having an outlet in the bonnet. Will have to focus on ducting into and out of the radiator now to make the most of it.
    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
×
×
  • Create New...