Apexi Safc Ii Help On Rb20

[Ray31]

Ive hooked my SAFC II up to my rb20...the af % displays fine and rpm reads fine but for some reason my throttle position and pressure readout are not functioning. When i have a look at sensor check the throttle voltage is around 0.0100v - ok i thought i wired it up wrong but ive triple checked the wire.

Is there anyone out there with an safc on an RB20? what voltages does your sensor check read on idle and load? and what wire did you run the grey wire (throttle position sensor) to?

Any clues would be appreciated thanks,

Ray

[Sydneykid]

Ive hooked my SAFC II up to my rb20...the af % displays fine and rpm reads fine but for some reason my throttle position and pressure readout are not functioning. When i have a look at sensor check the throttle voltage is around 0.0100v - ok i thought i wired it up wrong but ive triple checked the wire.

Is there anyone out there with an safc on an RB20? what voltages does your sensor check read on idle and load? and what wire did you run the grey wire (throttle position sensor) to?

Any clues would be appreciated thanks,

Ray

<{POST_SNAPBACK}>

Hi Ray, the throttle sensor output is pin #56, it sounds like you have used pin #48 which is the power supply to the throttle sensor.

cheers