Jump to content
SAU Community

Recommended Posts

Hey guys, My line is currently having a rebuild done with all the goodies. Running a T76 and power FC. I don't trust anyone in tassie to tune the thing, just after ideas of who would be best in melb to take it to. Heard good things about ICE and Race Pace, but not sure.

Cheers, Paul.

Edited by phat_r33
Link to comment
https://www.sau.com.au/forums/topic/84729-powerfc-tune-in-melbourne/
Share on other sites

They are a different art form, although Ben is a great tuner and engine builder, there are good tuners that can’t build engines and good engine builders that can’t tune :(

Ben gets my VOTE!

where is this race pace joint?

There are a few guys here that know how to build a good motor, but as far as tuning it goes, 'the best' told me I wouldn't be able to get anymore than 280rwkw with a powerFC cos they are to restrictive. And I know that to be incorrect.

Will go with race pace I think. Cheers.

i have heard nothing but good stuff about benno from race pace and have a great deal of repsect for him and the work he does. but i only take my car to paul from chasers tuning, he is the ex chief engineer of motec, so knows his tuning, good luck with ur tune tho mate.

I Live in Deer Park, and i wouldnt let anyone else tune my car!! Its worth the distance and the wait!!

hoppers crossing here....is that closer or further?

i spoze if u want it done right, an hour isnt so far to travel

ICE will probably do the job, though they are just amateurs when compared to RacePace. I don’t know how much they charge for a tune, I do know you will pay top dollar at RacePace. So if you want a quick/cheap tune ICE might be the guys to see. While RacePace are quite expensive just consider the fact that they are the best import tuners in Victoria and possibly even Australia. So you get what you pay for :(

I cannot quote exactly what Ben will charge you … I estimate;

$150 / hour

About four figures for a PowerFC tune … of course I could be wrong so ring them!

i rang up race pace just now..

$600-750 ;)

I wish i had the money to spend :D

I'll goto ice performance though I think, im sure they'll do a great job :)

ICE will probably do the job, though they are just amateurs when compared to RacePace. I don’t know how much they charge for a tune, I do know you will pay top dollar at RacePace. So if you want a quick/cheap tune ICE might be the guys to see. While RacePace are quite expensive just consider the fact that they are the best import tuners in Victoria and possibly even Australia. So you get what you pay for ;)

I cannot quote exactly what Ben will charge you … I estimate;

$150 / hour

About four figures for a PowerFC tune … of course I could be wrong so ring them!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
    • Noted. Have noticed BMW are more 'high maintenance' for sure. They've attracted my attention as I think the used car prices seem reasonable vs other options, and the extra quality overall vs a commodore / camry / corolla or similar of the same vintage is appealing, especially the interior, and they are more on the sporty side whereas the others mentioned can be more cruising or economical A-to-B only.
×
×
  • Create New...