Jump to content
SAU Community

Recommended Posts

Anyone ever heard of people using Automatic Transmission Fluid (ATF) in 5spd manual boxes in skylines, Apparently its supposed to give them better lubriction and quiet the gearbox operation down

If anyone has done this or know if it works well please put up a post as I want to hear other peoples responses before doing it to mine

Its bad for the gearbox. Mine required a rebuild after 30,000km's.

The car yard I bought my old VS 5ltr 5speed (now sold) did this to its gearbox.

Little did I know until I went to drop the oil as the shifter was locking in to place and became really sticky.

It turned out the box required a rebuild as the auto trans fluid stuffed the syncro's, unsure how true it is but apparently the vs 5ltr 5speed had fibro syncro's?!?!

Use good old castrol vmx80 or castrol syntrax 75/90 I think it is.

If have $100 to throw around drop some redline in to it.

I personally think castrol syntrax is just as good.

Edited by Cubes

What about Nissan Skyline boxes, im mainly interested in peoples responses on the RB20DET/RB25DET 5spd's ???

----------------------------------------------------------------------

Cubes - Yeah I have heard good/bad stories about using ATF fluid on 5spd's

Stagefummer11 - I was told today some ford 5spd's used ATF aswell

Yeah im running a R32 Gts-t 5spd and yeah when I come on boost you can hear a high pitch squieling noise from it so id say the bearings are goin to die soon,

I will be looking at either a properly built JATCO or a R33 Gts-t 5spd

either way im looking at 2500 which ever way I go

My belief is that car yards used to use Auto fluid when the gearbox was on its way out to smooth changes etc.

I used to own a VH with a 5 speed and thought it was time to change the gearbox oil. Put the recommended stuff in and could barely change gears.

Strained out the metal bits and put the shit back in. Worked fine till it was written off.

El Bee

Ok from what I know, its obviously a thinner oil. So its used when you have lazy syncros etc, the box is still stuffed, but it will give you a bit of time to save.

Now when we pulled out the redline oils book to, their shockproof ultralight said in terms of thickness it was near on identical to auto fuild. Its basically due to the additive in it.

So your options would be, auto fuild at what $25 for 4L? Some normal fuild and aditive, cost would depend on additive and the actual oil you pick, or the redline stuff at $100+. If the box is RS anyway, just go the auto stuff.

Try it ... If it helps with the whine good. If not drop in some thicker stuff, hopefully that would help?!?

Mine whines like crap also. I put up with it. :D

First second are extremely noisy, third not so bad, 4th 5th are annoying.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm not aware of e30 in Australia, but I'm pretty sure e85 is still around. You really want a setup with an ethanol sensor so you can run any mix of ethanol depending on what you can access. Fuel Check NSW app shows 14 site in sydney metro with e85. What are you adding, will you put in bigger turbs too? Apparently the wastegates are pretty small and can't bypass enough as you run more boost.  I'm sticking to 1.3 bar with 98 on the standard turbos with my tune on advice from the tuner, and boost drops significantly in the top end; apparently larger turbos with larger wastegates are needed to get anywhere meaningful from there.
    • Amazing work Duncan! It is never easy to pick up someone elses project and work all the parts out that are missing
    • Hey Ppl,   I am about to tuned my Infiniti Q60 with E-85 and if you can tell me some location where I can top up my car that would be great.   But my other question, is E-30 available because this tuned requires less mods parts and any info you can offer would be greatly appreciated too!!
    • Hey Duncan,   The parts have already been made by AMS Performance in Chicago, but I still to confirm if there are in Petrol Station in Sydney that sell E-30.   I know there are a few seeling E-85.      
    • That probably needs a specific thread....and if you want to run different ethanol mixes you will need the ethanol sensor and wire it into the ECU (which has different requirements depending on the ECU year apparently)
×
×
  • Create New...