Jump to content
SAU Community

Recommended Posts

Hey Guys

Just wondering how to get to install a REAR Strut bar??? I had a look in the boot is their any other way to get to the top of the rear struts to install it??

Thanks

if u are talking about a standard one, it doesnt attach to the top of the struts, the bar itself is attached to a black bracket on either side, which is attached to the back of the strut tower on two studs either side, (in the boot) you can see it when u remove the boot trim.

if u have a brace that actually attaches to the top of the the struts, u can access them by removing the rear parcel shelf from inside the car.

have a look here: http://www.skylinesaustralia.com/forums/in...showtopic=82746

i put a rear strut brace in the back of my r32. should be the same if u got a r33 (i assume u have a r33)

not true, there are two types of rear strut braces for the R33.

one that sits on top of the struts (requires parcel shelf hacking)

and another that sits on 2 pairs of studs that sit on the rear of the struts and face backwards. (requires boot lining to be cut)

the latter is a bit more rare to find - u can buy a ~$200-$300 cusco one, or find one from a wrecked 33GTR or some 33GTST (series II)

Yeah want to install an aftermarket Brace on my R33. So basically i need to get to them from inside the car on the parcel shelf. I think R32 are different aren’t they as the 33 has the battery and fuses in the back.

Edited by the97skyline

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to some I’ve seen though 
    • $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...