Jump to content
SAU Community

Stock 4-stud Wheels For R32??

nghiagero
 Share

Recommended Posts

nghiagero Community Regular

nghiagero

Posted
Posted

hey guys, just a quick question about something that i saw driving home today about a 32 gtst

whilst i was driving home a black 32 gtst was next to me and i saw the most perculiar thing, it had the stock 180 4-stud rims on it. is this normal or am i just not uptodate with my car research? i thought all skylines had 5 studs, mine does and so does every other 32 skyline i see, or is it that this funny guy got a 4 stud conversion so that he can run stock ca18det rims?? :D his car was fully stock, nothing but the wheels was out of place so mb.. just mb this is how it came from factory... but i doubt it...

any ideas?

Link to comment
https://www.sau.com.au/forums/topic/85234-stock-4-stud-wheels-for-r32/
Share on other sites
nghiagero Community Regular

nghiagero

Posted
  • Author
Posted

well come to think of it now... im not quite shure, the sun was already below the horizon, n from the back i saw a lil grey sticker on the top right so i assumed it was a gtst like mine, but when i passed it to my horror i saw stock ca 4 studs n was thinking WTF

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      braided lines for the turbos

      By GTSBoy · Posted

      For your application, where you'll be at that 1/2" size or perhaps larger, yeah, excellent. Although not if you need a tight bending radius anywhere, because the corrugated stuff is not anywhere near as flexible as rubber/teflon cored stuff. But for turbo oil lines? No. Too big. They just don't do the corro stuff down at the ~1/4" ID size that you'd want, and if they did the OD of it would probably be a bit too fat for fitting it into the tight spaces available. I use hoses like that all the time for fuel gases (LPG, NG) and liquid fuels (HFO, diesels, waste oils). When we did the London Olympic cauldron, with the 204 individual burners on it, we had miles of the stuff (although a lot of that was teflon core). A bunch of that crap is still cluttering up the workshop, more than 12 years later!
    • The Bogan
      braided lines for the turbos

      By The Bogan · Posted

      Would something like this be an option  https://processhose.com/products/configurable-metal-hoses/1-2-in-t316-stainless-steel-annular-corrugated-configurable-flexible-metal-hose-assembly-with-ends-t304-single-braid-masterflex-af5550.html I'm looking at this for replacing the OEM EGR when installing a aftermarket intake plenum 
    • r32-25t
      Unpeeling the Orange

      By r32-25t · Posted

      The once piece tail shafts with cv type joints on either end are the ones that end up vibrating and the vibration is caused by the cv joint binding as it turns, I’ve also seen them explode from the binding 
    • Kinkstaah
      braided lines for the turbos

      By Kinkstaah · Posted

      Take this with a pinch of salt, it's from someone (me) who got annoyed with turbos entirely. I hated aftermarket lines. If I had the option to use hardlines with whatever turbo I had - I would use them, 10/10, 100% of the time. The only reason people go larger, heat resistent, shielded lines etc is because they have to. And yes they don't last forever. Even if you spend big bucks on all the best heat shielding money can buy, with the best heat resistant, fuel resistant, oil resistant, radiation resistant hose, they get stiff and break down and just don't last the way a metal pipe will.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Unfortunately I am quite literally halfway across the globe. So all sources for parts like that are far away for me. What do you mean by that exactly?
×
×
  • Create New...