Jump to content
SAU Community

Recommended Posts

Need to change whatever is in my radiator tomorrow as I'm doing a minor service on the car myself (oil filter change, oil change, spark plug change, etc). Just wondering as to which coolant is recommended to be run in a stock R33 GTST skyline these days?

Dont really want to go to supercheap and buy some cheap $5 coolant and then to find out it'll destroy the engine after 4,000k's like people have reported Mobil engine oil to come out all gluggy after 4,000k's when they serviced it.

So. Any recommendations?

Link to comment
https://www.sau.com.au/forums/topic/85401-coolant/
Share on other sites

I recommend using concentrate because you can never get all the water out the block if you cant get to the drain bolt. That way the remaining water doesnt dilute the premixed coolant.

I reckon Castrol's stuff is good. Also Nissans concentrate is good. If the coolant capacity is 8L, just add 33% of it (Ie 2.7L or 3L) and fill with distilled water. Remember to drain, and rinse the system with distilled water twice (ie fill--->run for 5 mins--->drain--->fill--->run for 5 mins---->drain)

Too easy...

Link to comment
https://www.sau.com.au/forums/topic/85401-coolant/#findComment-1546718
Share on other sites

having previously had an alloy radiator built for my old car i spoke to the radiator building guy about this. he has tried them all and reckons the green nulon one is the go. it's a glycol based coolant (like they mostly are). just make sure that whatever you use is suitable for use in a motor with an alloy head. not such a concern on RBs (iron block) but on my old SR20 (all alloy) you need to make sure you don't get a reaction when you switch coolant. that's the second piece of advice, pick a brand and stick to it as some brands won't go well together and can cause a chemical reation. not good.

Link to comment
https://www.sau.com.au/forums/topic/85401-coolant/#findComment-1546756
Share on other sites

rinse the system with distilled water twice

you don't need to use distilled water, tap water is fine.

imo, any coolant will do, don't really see the difference between more expensive brands, and as long as your car doesn't overheat, then you're fine.

(just read the label and make sure it's alright for your car)

Edited by MerlinTheHapyPig
Link to comment
https://www.sau.com.au/forums/topic/85401-coolant/#findComment-1546970
Share on other sites

Yeah well if you've seen Adelaide tap water you'd start thinkin twice. Thus having a few litres of dodgy tap water still sitting in your block makes you wonder. Distilled water is cheap, no excuses.

Oh and I haven't had good experiences with Nulon's green. On 2 cars of mine the water pumps seals died soon after changing themover. Nulon green is actually a hybrid OAT/Glycol coolant.

Edited by Busky2k
Link to comment
https://www.sau.com.au/forums/topic/85401-coolant/#findComment-1547207
Share on other sites

Ended up doin the coolant change over the weekend. Got a 5L bottle from Autobarn.

Autobarn plus many other skyline drivers I talked to about this on Friday night recommended that I only put 50% of the radiator's compasity of coolant in and the other 50% of the compasity of distiller water in. This, I have done and can see somewhat a bit more performance since the change.

Then again, I've also done a oil & oil filter change as well which really I think needed to be done.

Anyway! this weekend is the spark plug change. Just got to sit around the place I'm doing it at for 2hrs to let the damm engine cool down. OR! I could buy one of those huge industrial fans and let it blow on the engine for 10mins. LOL

Link to comment
https://www.sau.com.au/forums/topic/85401-coolant/#findComment-1550172
Share on other sites

Ended up doin the coolant change over the weekend.  Got a 5L bottle from Autobarn. 

Autobarn plus many other skyline drivers I talked to about this on Friday night recommended that I only put 50% of the radiator's compasity  of coolant in and the other 50% of the compasity of distiller water in.  This, I have done and can see somewhat a bit more performance since the change.

Then again, I've also done a oil & oil filter change as well which really I think needed to be done.

Anyway!  this weekend is the spark plug change.  Just got to sit around the place I'm doing it at for 2hrs to let the damm engine cool down.  OR!  I could buy one of those huge industrial fans and let it blow on the engine for 10mins.  LOL

hey if u are talking about mixing concentrate with distilled water, generally you only need to mix around 1/3 concentrate with 1/3 water, and you would never put all the concentrate in!!

changing the coolant wont give u a performance benefit you can feel so ill assure u that the gain u felt was in your head :huh:

with the spark plug change unless your hands are very sensitive you can usually remove most of the stuff straight away when engine is hot, i usually use a rag when im touching hot parts when changing spark plugs so try that dont bother waiting u should be fine..

Link to comment
https://www.sau.com.au/forums/topic/85401-coolant/#findComment-1550633
Share on other sites

hey if u are talking about mixing concentrate with distilled water, generally you only need to mix around 1/3 concentrate with 1/3 water, and you would never put all the concentrate in!!

changing the coolant wont give u a performance benefit you can feel so ill assure u that the gain u felt was in your head :D

with the spark plug change unless your hands are very sensitive you can usually remove most of the stuff straight away when engine is hot, i usually use a rag when im touching hot parts when changing spark plugs so try that dont bother waiting u should be fine..

Didn't say I got extra performance just from the coolant. I also did a oil service (oil change and oil filter change) to which would of helped with whatever extra performance I may of felt. Then again, cold air could of also been part of the factor for the turbo.

Or fact I probably didnt drive the car for a few hours to which had let the engine cool down. Plenty of facts could of been apart of the reason to what performance I may of felt.

Link to comment
https://www.sau.com.au/forums/topic/85401-coolant/#findComment-1550857
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...