Jump to content
SAU Community

Recommended Posts

  • Replies 714
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

as above ^^

first one was on the 15th regarding payment sent.

not meaning to be hassling you or anything.

just really want the parts before the holidays (1 week now)

thanks gary

Ross.

Hi mate

I meant to do this a few months ago but fell really sick and couldnt afford too being off work. But i have money now! I already have the bilsteins on my car so thats done. I have a s2 r33 gtst. ive just realised today the inside camber wear on my car is bad.. the inside camber on my rears is bald, so need new rears asap. and my fronts arent too much better, but i think can get away with them for a bit. left side of car wear is a bit worse than right too?

So i have $1k i can spend. What do you suggest i do? whiteline springs all round and rear camber kit?

Is the price list on the main page up to date?

Cheers

Rob

Hi Gary,

I haven't been able to get a PM through to you for a while, so I will give you the details for the remainder of my order on here:

Nissan Skyline R33 GTS-T

73175 Front Springs $144.00

83139 Rear Springs $144.00

Front Bilstein Shocks $476.00

Rear Bilstein Shocks $476.00

Standard Strut Tops x 4 $240.00 (Already paid for - you are holding in your garage)

W0921 Bump Stop & Dust Cover x 2 $102.00

Freight zero _________

Sub Total $1,582.00

Less extra 5% (79.10)

Less payments made (240.00)

_________

Total paid today to Jamex $1,262.90

My receipt number for payment of above is 875883, paid 29/6/07 11:31AM.

Please PM for delivery details. I would like to get everything installed on 7 July.

Cheers

Ben

relax bear84

i have used SK on several occasions and i can guarantee you will never have more issues than i have had (not due to SK's fault BTW, where the model variant i have has different parts to other models) but he has been helpful and always provided the correct part AND spent the time talking through problems i have faced.

you will get your parts.

no doubt the pm box has been full.

Edited by wolverine

Sorry for the delay in responding to PM's, they come in faster than I can answer. I have answered 27 since lunch time today, only 42 more to go to get up to date. If you haven't received a response yet, then please be patient I will get to all of them, as I always have.

:dry: cheers :w00t:

Thanks for getting my order together and getting back to me Gary. My car is almost at the point of being undriveable so the new suspension couldn't come sooner!!

Cheers

Sorry for the delay in responding to PM's, they come in faster than I can answer. I have answered 27 since lunch time today, only 42 more to go to get up to date. If you haven't received a response yet, then please be patient I will get to all of them, as I always have.

:D cheers :D

what's involved in upgrading swaybars?, is it as simple as swaping them over??

and a price for front and rear posted to briz would be much appreciated!!

Edited by Crossie

SK,

I've got what looks to be king springs on the front of mine and original worn dampers. It hits the cut shorter bump stops often. Is fitting bilsteins likely to solve this or should I order whiteline springs with them?

Also I have the adjustable sway bars. They are set on medium all around. Would you recommend maybe hard on the back?

Thanks,

Daniel.

SK,

I've got what looks to be king springs on the front of mine and original worn dampers. It hits the cut shorter bump stops often. Is fitting bilsteins likely to solve this or should I order whiteline springs with them?

Also I have the adjustable sway bars. They are set on medium all around. Would you recommend maybe hard on the back?

Thanks,

Daniel.

Hi Daniel, it depends on which King springs you have. The Lows are OK, but the SuperLows are not. So check the part numbers, if you can't read them then check the heights, centre of wheel to guard. Lows will be around 350 mm front and 340 mm rear, SuperLOows are around 335 mm front and 330 mm rear

Regardless, lowwered springs and standard shocks is a not a good idea. This thread explains why;

http://www.skylinesaustralia.com/forums/in...c=103158&hl

The Bilsteins have the rebound valving necessary to control the higher spring rates, plus they have more low frequency bump valving to compensate for the reduced travel that the lowered springs result in.

I usually start of with the front bar on full soft and the rear on the middle setting.

If it oversteers too much, then I move the front bar to the middle setting

If it still oversteers too much, then I back the rear bar off to the softest setting

If it still oversteers too much, then I move the front bar to the highest setting

If it still oversteers too much, then you might need some more rear camber and/or the HICAS is still working (get rid of it) and/or the rear subframe alignment kit needs to be set to maximum traction (squat)

OR

If it understeers too much, then I move the rear bar to the highest setting

If it still understeers too much then you don't have enough caster/camber on the front

:P cheers :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • att.4QNbuJlz_gNZPFBGFqeEvxSUHXkGt7z40V59MrtXTPg.mp4    
    • Plan on the day will be to park trackside. Depending on space availability we will try put a small shade tent and a few of the cars on top of the hill inside turn 3, this is an easy to get to parking area with views of Turn 2, Turn 3, Turn 4 and Turn 5 and limited other pieces of the view around the track. IMPORTANT NOTE! One consideration from previous years is from memory the trackside parking sells out before the admission tickets, for that reason I encourage anyone planning on coming to buy tickets for parking now via the official website; https://www.worldtimeattack.com/ The type of parking you are looking for is 2 Day Park & View (Access Around Venue) Vehicle Pass Only Please note this does not include admission to the event itself, remember to grab that also, and kids under 12 get in for free!
    • This is going to be a mid week evening cruise. Come along and join us for a drive out to Palm Beach. This is a change of event plans after talking to some of the older members of the club. SAU NSW is planning on hitting Old Pac again shortly, stay tuned for details. When: Thursday 26th of June Time: 7:30pm meet/8:00pm departure/10:00pm finish Meet: Spit West Car Park / Spit Rd Mosman NSW 2088 Destination: Palm Beach Public Parking / 16 Ocean Rd Palm Beach NSW 2108 Up to date information as always can be found on the events page of our website, the link for this event is https://www.saunsw.com.au/events/palm-beach-cruise There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our track days. This is an official SAUNSW event and will be run under a Motorsport Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • Good time for a carbon roof  
    • Not in any way aroused by any of those, except maybe the big AMGs. And that would break my never a Euro, ever, rule.
×
×
  • Create New...