Jump to content
SAU Community

Recommended Posts

Hiya sydneykid,this be my firsty ever SAU post.Just signed up.

Anywayz I have an R32 GTS4 which is currently suspended by Skippy the Bush Kangaroo on Acid.Not my choice.Was like that when I bought it a week ago.

Sooo,what I want to know is can you supply a kit to sort this evil critter out.I want everything and I want it now.What do you recommend.The car is for road use.Will be contacting GTRgeoff for one of his HICAS lock bars.I intend to do it all once and do it right before I spend all my money misbehaving.Also if you can recommend a workshop in SE Qld that would be great.

PM on its way

:P cheers :P

  • Replies 714
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Ok, so I've finally found the right thread to post in... SOrry about this... I'll learn to read a little more before posting.

hey sk...

My JIC coilovers are rattling and looks like they need a rebuild. I need to get rid of them I think. Mackay has really shitty roads, but I like a low car. Is there a setup possible for this? I like my car at a weird height - the Front slightly lower then the back (looks meaner I think heh)

Anyway, for the moment I just want to replace the coilovers because the cash storage isn't that great at the moment. Its a 1996 GTS-T so it hasn't worn many of the parts out just yet.. (pedders checked)

What would you suggest? I attached a few pics of the car to give you some idea of the height.

The measurements at the moment are (from center of wheel to edge of guard)

Back - 335mm

Front - 320mm

Hope I'm not being a pain in the ass.

What will I need?

post-7271-1161050603.jpg

post-7271-1161050613.jpg

post-7271-1161050621.jpg

Ok, so I've finally found the right thread to post in... SOrry about this... I'll learn to read a little more before posting.

hey sk...

My JIC coilovers are rattling and looks like they need a rebuild. I need to get rid of them I think. Mackay has really shitty roads, but I like a low car. Is there a setup possible for this? I like my car at a weird height - the Front slightly lower then the back (looks meaner I think heh)

Anyway, for the moment I just want to replace the coilovers because the cash storage isn't that great at the moment. Its a 1996 GTS-T so it hasn't worn many of the parts out just yet.. (pedders checked)

What would you suggest? I attached a few pics of the car to give you some idea of the height.

The measurements at the moment are (from center of wheel to edge of guard)

Back - 335mm

Front - 320mm

Hope I'm not being a pain in the ass.

What will I need?

hey sk, are you able to help.. Sorry if I'm being pushy.

hey sk, are you able to help.. Sorry if I'm being pushy.

PM sent

:thumbsup: cheers :no:

PS, sorry for the delay, people who send PM's get answered first, questions in posts come second.

Edited by Sydneykid
PM sent

:laugh: cheers :woot:

PS, sorry for the delay, people who send PM's get answered first, questions in posts come second.

thats cool.

Hey, do you have a recommended Height setup between front and back?

For example, my front and back heights are 15mm different (back is higher), could this cause issues with types of driving eg. Dragstrip, and daily driving?

Front Castor Kits. Are they adjustable or preset at 7 deg?? Will they only work with the Bilsteins or can they be used in conjunction with stock or other coilovers?

thats cool.

Hey, do you have a recommended Height setup between front and back?

For example, my front and back heights are 15mm different (back is higher), could this cause issues with types of driving eg. Dragstrip, and daily driving?

Gidday Mafia, this is Garys recommended settings which you can get with this kit

For the street here are my recommended settings;

Front Camber -1.00

Front Caster +7.00 (slightly more on the left to offset the drift to the gutter)

Front Toe 0.00

Rear Camber -0.5

Rear Toe 2.00 mm in on each side

For the track;

Front Camber -2.50

Front Caster +7.00 (or more if you can get it)

Front Toe 2 mm out each side

Rear Camber -1.25

Rear Toe 2.00 mm in on each side

As you can see the big change is camber, what most the guys do (me included) is to use the Whiteline camber kits to adjust the camber when they have the car jacked up to put the track tyres on. Just get the wheel aligner to mark the amount of rotation you need for the 2 settings. Then you simply rotate the offset bush for the right amount (track or road).

The Group Buy Bilsteins have additional circlip grooves added so you can set the height you want before you fit them. There are 6 grooves 8 mm apart and I can tell you the height that you will get from each groove. Keep in mind that GTSTs handle best around 350 mm front and 340 mm rear (centre of wheel to guard).

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
    • Yes I as well would like to find out where I could get some of the seat material with the red or blue small squares in it
×
×
  • Create New...