Jump to content
SAU Community

Recommended Posts

how are you people? i was wondering what your thoughts would be on drifting a r33 non turbo with a completly std motor but going all out on the suspension lsd and so fourth?

has anyone done this i cant have a turbo because of the new restrictions in nsw thanks!

it would be a rb25de type s

Edited by future1
Link to comment
https://www.sau.com.au/forums/topic/85611-na-drift/
Share on other sites

I have an n/a rb25 de cefiro with teins and lsd yes it is possible.

a mechanical diff would make it easier it drift ok remeber the ae 86's are n/a I'm a great believer that suspension is more important than power when drifting

cheers

meggala

how are you people?  i was wondering what your thoughts would be on drifting a r33 non turbo with a completly std motor but going all out on the suspension lsd and so fourth?

has anyone done this i cant have a turbo because of the new restrictions in nsw thanks!

it would be a rb25de type s

Link to comment
https://www.sau.com.au/forums/topic/85611-na-drift/#findComment-1549325
Share on other sites

agree with meggala... but power does make it easier unless your willing to commit to the corner.

i've attempted a few "powerslides" with clutch popping - can't say is the healthiest thing...

take note that 33's are heavier than the 86.

Link to comment
https://www.sau.com.au/forums/topic/85611-na-drift/#findComment-1549529
Share on other sites

you could do it. i used to have an old R31. it was only a single spinner diff, and my spare tyre was a rock hard compound. when i wanted some sideways action, i put that tyre on the driving wheel, and drifto!

the R33 gts coupes aren't that heavy, about 1300kg (i think). with the suspension and diff you have, just put some really sh1t tyres on the rear and hang on! some basic power increase mods would be good as well, like a pod and an exhaust.

Link to comment
https://www.sau.com.au/forums/topic/85611-na-drift/#findComment-1552807
Share on other sites

it is possible ive got a mate who drives an NA silvia with shitloads of suspension work done and he can drift aswell as a turbo car...

as Eug said you just have to commit yourself to the corner and use proper technique rather than just power on mid corner and hang the tail out as i have seen some people do.

i drive a turbo R32 and the power just makes it easier to hold the tail out.

but it is very feasible to make an NA car drift well.

good luck

Mitch

Link to comment
https://www.sau.com.au/forums/topic/85611-na-drift/#findComment-1554556
Share on other sites

Nah their not heavy at all mines only at 1150Kg according to my rego.

your rego is wrong :(

unless you have the model with the RB20E?? doubt it would make 170kg difference though.

they weigh 1320kg stock. i have had this confirmed on a weighbridge.

you can definitely drift a n/a in the wet (or so i'm told...), as for the dry i'm not game to try it on the roads and haven't found time to take it to the track.

Link to comment
https://www.sau.com.au/forums/topic/85611-na-drift/#findComment-1556648
Share on other sites

My partner can make our whale drift, much to my surprise, on dry roads too, scared the crap out of me (boys will be boys!! :P ). I didn't think it would of had the power to drift, although it has had quite a bit of suspension work done, a button clutch, LSD added, and making 112rwkw.

Link to comment
https://www.sau.com.au/forums/topic/85611-na-drift/#findComment-1557427
Share on other sites

Were you planning on learning to drift with this car, or trying to compete with it?

If you're only trying to learn and maybe run in some low level comps, then you can "drift" anything. I used to get my old Volvo sideways, and that thing was a dead stock auto.

They weren't the most elegant drifts and I wouldn't try linking all of Wakefield Park together in it, but for the EC skid circuit (I haven't been out to Driftland yet so I can't say) it would have been fine wet or dry.

It certainly taught me the basics of countersteering, and balancing the car on the throttle / brakes.

If you wanted to get into some serious competition events you may want more power and torque than what a stock RB25DE is going to offer you.

Link to comment
https://www.sau.com.au/forums/topic/85611-na-drift/#findComment-1568192
Share on other sites

I used to drift mine everywhere, uge can back this up wet or dry, and as he said you had to comit to the corner, alot harder in an underpowered car but more then possible..

The original diff was the best... till i smashed it, and none have since compared... the last 3 have been turbo ones but they didnt lock up as well as the original... i now have a nismo 1.5way mechanical.

Link to comment
https://www.sau.com.au/forums/topic/85611-na-drift/#findComment-1568300
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update Issues 5 (plus #4) - 10 After making a claim about issue #4's missing part, DeAgostini Japan sent a whole new issue #4 and it arrived about 2 weeks after that. That was back in early March. It took another 4 weeks to receive issues 5 - 13 though. This update is for issues 5 - 10. Ove the 5 issues the front left suspension and most of the engine have been completed. The quality of the castings and fit of the parts is quite good, it seems better than DeAgostini's BNR34 Skyline GT-R from the Fast & Furious 2 movie, which (to me anyway) doesn't seem to have as tight tolerances or quite as accurate castings.  Each issue has a lot of info about the 1989 - 1993 Skyline range and other Nissan models from that era, but the focus is on the BNR32 Skyline GT-R Nismo and the various racing it did in Japan, Europe (Spa 24hrs) and of course Australia. I've included some text translated with Google Lens in some photos and will add to them if there's anything worth including. 
    • If it's for a SR20, make sure it's not the American Poncams, might as well call them Poocams. Had a set in a friend's car, all scuffed up after a few track days. Like the metallurgy Tomei USA used is junk. Went back to JDM OG Tomei Poncams, no issues till now.   Tomei USA is not the real OG Tomei.   Random rant over, fk the US of A, bunch of c u n t s. 
    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
    • Unfortunately, not only is that not the case, one of the main "Selling points" of safety over comms is they clearly state in writing that there's no need to segregate safety networks from non-safety networks. It always gets intermingled with everything else on an ICS/OT network. 
×
×
  • Create New...