Jump to content
SAU Community

Recommended Posts

I must admit that I'm impressed, I thought the numbers would have never been reached by Bugatti.

Pictures and Review

Engine 72º W 16 (Yes, as in 16 Cylinders)

Weight 1900 kilo / 4188.8 lbs

Power 1001 bhp / 747 KW @ 6000 rpm

Torque 1250 Nm / 922 ft lbs @ 2200 rpm

Top Speed 407 km/h / 253 mph

0-60 mph Acceleration N/A

Drive All wheel drive

Gearbox 7 speed Sequential

Aspiration Quad Turbos

Interesting facts:

  Quote
Despite the delays, Bugatti has managed to meet their goal set back in 2001, which was confirmed at the Ehra - Lessien Volkswagen proving grounds where a production Veyron topped out at 407 km/h (253 mph). The stellar acceleration figures are only outdone by the braking abilities; assistance from an airbrake and the massive carbon fibre discs can bring the car to a halt from its top speed in less than 10 seconds.
  Quote
Just to be on the safe side none of the production cars will have 1001 bhp, but instead 5% to 8% more.

241930pv.th.jpg

Credits go to Wouter Melissen from www.ultimatecarpage.com

Yeah its fast - unfortunately it looks like something i had in development since last nights dinner and finally made it into production this morning after breakfast.

Still im sure there's plenty of people lining up for them.

Try 425mm ceramic/carbon composite at all 4 crns, that should do the trick. Oh I forgot it has verticle flaps that acts as air resistant brakes, from what I found out, they works the treat, but the price is hideous.

On another note Brisbane Audi are supposedly to be the distributor for Aust. and when you're in negotiation or ordering, some dude fly out from France to make note/details on your equipement levels after a substantial deposit.

For buying the car you get to visit the factory and fitted to your car and trained for in-vehicle use, by the factory.

Also there is 1 confirmed order.

The ENZO and Porsche GT are dedicated LHD, Also they can be spec without any emission control"exhaust&cat" also they too farking LOUD, and I mean loud as an understatement.

The Bug is built to order either LHD or RHD and they cone with full emission and noise control, which does say alot about the car ability to do what it does with all the strings attached, where as the previous 2 are just track cars disguise as street cars.

Also on another note, the Bug has a launch/Vmax sequence, where the main key has to be used, and a secondary button to activate it, and what it does is, goes through and check coolant/oil/heat/tyres and then shut down frontal opening & a/c then settles the car down to 50mm, all the guages blackens out and the only one still visible are highlighted. tacho and speedo is all is left of the entire intrument cluster.

  hungry6 said:
The ENZO and Porsche GT are dedicated LHD, Also they can be spec without any emission control"exhaust&cat" also they too farking LOUD, and I mean loud as an understatement.

The Bug is built to order either LHD or RHD and they cone with full emission and noise control, which does say alot about the car ability to do what it does with all the strings attached, where as the previous 2 are just  track cars disguise as street cars.

Also on another note, the Bug has a launch/Vmax sequence, where the main key has to be used, and a secondary button to activate it, and what it does is, goes through and check coolant/oil/heat/tyres and then shut down frontal opening & a/c then settles the car down to 50mm, all the guages blackens out and the only one still visible are highlighted. tacho and speedo is all is left of the entire intrument cluster.

Well if your gonna pay a million for a car youd expect that fancy shit!! :rolleyes:

So, what would win? This or a Koenigsegg CCR? Both have almost identical claims for acceleration (0-100 in under 3 secs) and top speed (over 400km/h)... My money is on the Koenigsegg, despite a very slightly lower vmax - it's just so much lighter!

As for Price, my prediciton is the Bugatti will be at least $2.5 million once it lands here. Given a Pagani Zonda is $1.4 million over here, and that is signifficantly cheaper than the Bugatti will be in overseas markets.

Edited by Big Rizza

I have seen a DVD of the Bug, courtesy of Audi Bris. on this car and althought I'm not a fan of it, but honestly, comparing the bug and the koenigseggCCR is like comparing a go-kart to an F1 car, Really the technology in the bugs is beyond me and many other imaginations. although conceptually a street car, but it would leave most super exotic lay in it wakes on the track.

There is a video of a k.CCR doing the round of hockemhein, going by the time a Z tune GTR would whip it up like a little school kid.

Edited by hungry6

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...