Jump to content
SAU Community

Any Comment? Good Or Bad?

siaw

By siaw,
in Western Australia

 Share

Recommended Posts

siaw Explorer

siaw

Posted
Posted

Hi all, my car somehow accidently make a 180 spin and after that, I realize a few diffrent from before. When the engine startup during cold weather, it start at 2k rpm, b4 that was 1k only. But it then slowly go down to 600-700rpm. Before it make the spin, max RPM during startup is 1k and normal running is 500 only. Not to mention, my Apexi turbo timer "DEAD", no information been display. My best guesses is the ECU somehow auto reset! Anyone have any comment on it? Is this good or bad?

Link to comment
https://www.sau.com.au/forums/topic/85727-any-comment-good-or-bad/
Share on other sites
Kaido_RR Grand Master

Kaido_RR

Posted
Posted
Hi all, my car somehow accidently make a 180 spin and after that, I realize a few diffrent from before. When the engine startup during cold weather, it start at 2k rpm, b4 that was 1k only. But it then slowly go down to 600-700rpm. Before it make the spin, max RPM during startup is 1k and normal running is 500 only. Not to mention, my Apexi turbo timer "DEAD", no information been display. My best guesses is the ECU somehow auto reset! Anyone have any comment on it? Is this good or bad?

its Highly unlikly that the spin did anything to your car,

It is normal for your car to rev at higher rpm on the cold start aslong as the rpm drops once the car is warm up then you shouldnt worry about it. Normal idle rpm is around 600-800rpm

For your apexi turbo timer, im guessing that the spin may have knock it around and it is possable that the wiring was loses and the spin just knock it out of place, check all ur wiring and make sure everything is connect and grounded right.

Also there is an idle screw on your car, and if ur worried about ur idle just play around with it till u get it to what it was like

Hope that Helps

-Michael :D

siaw Explorer

siaw

Posted
  • Author
Posted
hahaha

did you hit anything? cus really spinning shouldn't do shit.

I'ts my freaking lucky day! There wasnt any vehicle or anyshit on all 4 lane...it just spin out...ntg been hit...by the way, the engine die after the spin, took me 10 sec to start the damm engine!!!

Kaido_RR Grand Master

Kaido_RR

Posted
Posted
I'ts my freaking lucky day! There wasnt any vehicle or anyshit on all 4 lane...it just spin out...ntg been hit...by the way, the engine die after the spin, took me 10 sec to start the damm engine!!!

did ur car die cuz ur didnt put ur foot on the clutch ? i have had a spin and the reason my car die was i had one foot on the brake and forgot about the clutch

Lozzle Proficient

Lozzle

Posted
Posted

What Mike said bout the idling is right, the revs will drop as the engine warms up. "Slowing" to 700 is alright. That's where mine sits at after warming up.

Also agree you probably stalled the car by not clutching in.

Your car would be fine, sounds like rattled wires on ur TT or something.

How did your 'car' accidently 180 itself....?

Steve Grand Master

Steve

Posted
Posted

Jeez its a tough crowd in here (some), the poor guy is obviously from os, and he gets slammed for not speaking english, his grammer isnt the best and he gets canned for that.

What ever happened to the friendly forums? :O

"my car somehow accidently make a 180 spin " siaw, just so you know next time, to write this using the correct aussie grammer, try this:

"I farked up coming out of a bend, put my foot in a bit too hard and the back end went out, after a bit of tank slapping, I lost it compeletly and she did a 180"

Its ok, I know I have farked up heaps driving my car, especially when I was a young fella - probably why P platers have such a high mortality rate :D Dont feel too bad about being honest when you fark up, we all do it, its one way to learn.

Glad to hear there was no accident, you did get lucky there.

siaw, suggest, (as others have) it has something to do with the TT, check all the wiring, if that doesnt work, also check your inlet piping, you may have a small leak near the manifold as some pipes on these cars can be a bit old and tired. Also, as suggested, you could try adjusting the idle control valve, but this is more a cover up than a fix.

If you live near willetton, drop me a pm and you can come around to my place and I will have a look for you to see if it is something obvious, or, if all else fails, just take it to a reputable workshop such as C-Red, Hyperdrive, X-Speed and ask them to take a look.

good luck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      High temp brake fluid?

      By Duncan · Posted

      yeah I've never understood that either.... And to answer an earlier question, I write the date on open bottles and throw them if more than 12 months old (which they almost always are, because I don't need to bleed them unless I'm changing lines/calipers etc in between)
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Nah, the one that hit the boot was a big steel locker, around 6 foot height, 4 foot wide and 2 foot deep, empty it weighs about 15kg and had about that amount of stuff in it The photo didn't give a good representation of the actual damage, the large ding on the passenger side was about a inch deep, the one on the driver was about 1/2 inch deep, right on the curve, where the inner boot frame doesn't let you get behind it with a dolly Basically the same issue with getting behind the damage on the centre of the boot We could have filled it all with bog, but my OCD would be triggered every time I looked at it, knowing what hides beneath  As for the locker, I did get the shits with it and put it in the scap metal bin, but, I pulled it out and it is now sitting in the garage at home full of car servicing stuff, cleaning gear and random tools, it's going to pay for it's indiscretions
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Whilst I typically don't cheap out on things, if I can save some money, like $1000, on a clean straight panel, that gives me $1000 to spend on other stuff, basically free money really 🤔 🤣
    • Ozdavroz
      NC MX5

      By Ozdavroz · Posted

      Is the toolbox that damaged the boot seal the same item that fell on the car during the storm a while back?
    • Watermouse
      NC MX5

      By Watermouse · Posted

      Who are you to deny yourself? I’ve said this many times to myself and apart from getting what I really want, I go quiet for a while whilst working out what I just did to my savings and how will I afford what it cost, then, next payday…
×
×
  • Create New...